500, 630 ?8th Avenue SW
Calgary, Alberta T2P 1G6
p 403.233.2850
f 403.261.4018
w edsi.ca
SECTION 1 ?IDENTIFICATION OF PRODUCT
Product Name: Oil - Accel
Chemical Family: Propylene carbonate based activator
Product Use Drilling Mud Additive
Work Place Hazardous Information Systems Data Transportation Of Dangerous Goods (TDG)
(WHMIS)
TDG Classification: Not controlled under TDG
WHMIS Classification: D - 2B Package Group: N / A
Work Place Hazard: Skin and eye irritant UN Number (PIN): N / A
SECTION 2 ?HAZARDOUS INGREDIENTS
Ingredient Exempt Concentration OSHA PEL ACGIH TLV CAS LD50 LC50
Physical StateLiquid
Odor and Appearance: Clear odourless liquid
Odor Threshold: Not determined
Vapor Pressure: Negligible at 20 0C
Vapor Density: Not determined
Evaporation Rate: Not determined
Coefficient of Water To Oil Distribution:
Boiling Point: 241 0C
Freezing Point:
Melting Point: -49 0C
pH: Not applicable
Solubility:
Specific Gravity: 1.2
Percent Volatile by Volume: Not determined
- Page: 2 of 4
MSDS
th
500, 630 ?8 Avenue SW
Calgary, Alberta T2P 1G6
p 403.233.2850
f 403.261.4018
w edsi.ca
SECTION 4 ?FIRE AND EXPLOSION DATA
Conditions Of Flammability:
Flashpoint: > 134 0C
Lower Flammable Limit: Not determined
Upper Flammable Limit: Not determined
Auto Ignition Temperature: Not determined
Means Of Extinction
Use Dry chemicals, CO 2 , foam, or water spray to extinguish fire.
Hazardous Combustion Products
Unusual Fire and Explosion Hazards
None known
Special Firefighting Procedures
Use full protective equipment and self contained Use full protective equipment and self
contained
SECTION 5 ?REACTIVITY DATA
Chemically Stable?: Yes
Conditions Of Chemical Instability
Incompatible With Other Substances?: Yes
Incompatible Substances
Strong oxidizers
Conditions Of Reactivity
Hazardous Decomposition Products
CO X , smoke on combustion.
Hazardous Polymerization:
Will not occur.
Oil - Accel
- Page: 3 of 4
MSDS
th
500, 630 ?8 Avenue SW
Calgary, Alberta T2P 1G6
p 403.233.2850
f 403.261.4018
w edsi.ca
SECTION 6 ?TOXICOLOGICAL PROPERTIES
Skin Skin Absorption Eye Contact Inhalation Ingestion
Routes No No No No No
Of Entry:
This product has low Low oral
Prolonged skin contact may cause Eye contact with
Irritation:
vapour pressure and is toxicity.
irritation. product may result in
eye irritation. not expected to present
an inhalation exposure
at ambient conditions.
General Irritancy Of Product
Exposure Limits
N/A
Effects Of Acute Exposure: N / A
Effects Of Chronic Exposure: N / A
Sensitization To Product: N / A
Carcinogenicity: N / A
Teratogenicity: N / A
Reproductive Toxicity: N / A
Mutagenicity: N / A
Synergistic Products: N / A
SECTION 7 ?PREVENTIVE MEASURES
Gloves: Suggest gloves.
Respirator: Use NIOSH / MSHA approved respiratory product when airborne exposure is
excessive.
Eye: Suggest goggels.
Footwear:
Clothing:
Other:
Engineering Controls
Storage and Handling Requirements
Avoid ingestion. Practice reasonable caution and personal cleanliness. Avoid skin and eye
contact. Store in a cool well ventilated area.
Ventilation
General mechanical.
Leak And Spill Procedures
(Use appropriate safety equipment.) Small spills, recover material; return recovered material to
plant.
Oil - Accel
- Page: 4 of 4
MSDS
th
500, 630 ?8 Avenue SW
Calgary, Alberta T2P 1G6
p 403.233.2850
f 403.261.4018
w edsi.ca
Waste Disposal
Incinerate / dispose to conform with local disposal regulations.
SECTION 8 ?FIRST AID MEASURES / OTHER HAZARDOUS
INFORMATION
Specific Measures
Skin First Aid
Flush skin with soap and water for five minutes after contact.
Eye First Aid
Flush eyes for at least 15 minutes with clean water. Seek medical attention if irritation develops
or persists.
Inhalation First Aid
Remove to fresh air.
Ingestion First Aid
If swallowed, do not induce vomiting. Give water to drink. Seek immediate medical attention.
SECTION 9 ?PREPARATION INFORMATION
Prepared By: Safety Department
Phone: (403) 233-2850 Preparation Date: October 01, 2009
THE INFORMATION AND SUGGESTIONS CONTAINED HEREIN ARE GIVEN IN GOOD FAITH. NO
WARRANTY, EXPRESSED OR IMPLIED, IS MADE.