1
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
PRODUCT AND COMPANY INFORMATION
Company BASF Building Systems For Burke Flooring
889 Valley Park Drive
Shakopee, MN
55379
Telephone 952-496-6000
Emergency telephone (800) 424-9300
(703) 527-3887 (Outside Continental US)
Product name BR-710 One Part Urethane Adhesive
MSDS ID No. 10718
TSCA Inventory All components of this product are included, or are exempt from inclusion, in the
EPA Toxic Substances Control Act (TSCA) Chemical Substance Inventory.
Canadian DSL All components of this product are included, or are exempt from inclusion, in the
Canadian Domestic Substance List (DSL).
Product Use Description Adhesive
1. HAZARDOUS INGREDIENTS
Chemical CAS No. TLV STEL PEL CEIL Weight %
NF NF NF
64747-48-7
H YDROTREATED F no -10 on %
PETROLEUM DISTILLATES
- F on %
NF NF NF NF
901 B-87-9
POLYMETHYLENE 0 00
POLYPHENYL ISOCYANATE
0.005 ppm
METHYLENE BISPHENYL 101-68-8 N.E. N.E. 0.02 ppm 0.00 - 5.00 %
DIISOCYANATE
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
2
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
3. HAZARDS IDENTIFICATION
PHYSICAL
HMIS?Rating HEALTH FLAMMABILITY HAZARD CLASS
2 1 0 MR
Primary Routes of Inhalation
Entry Skin contact
Eye contact
Effects of Overexposure
Inhalation of high vapor concentrations may cause symptoms like
Inhalation
headache, dizziness, tiredness, nausea and vomiting. Inhalation of high vapor
concentrations can cause CNS depression and narcosis. Prolonged inhalation can
be harmful.
Skin Can cause slight irritation. Repeated or prolonged skin contact may cause
allergic reactions with susceptible persons. May cause sensitization by skin contact.
Eyes Can cause slight to moderate irritation, redness, tearing and blurred vision.
Ingestion Intake can cause gastrointestinal irritation and nausea.
Chronic exposure This product contains Crystalline (quartz) Silica which has been listed as a human
carcinogen by NTP (Group 1) and IARC (Human Carcinogen) and a Suspected
Human Carcinogen by ACGIH (category A2). Repeated or prolonged over
exposure to free respirable Crystalline (quartz) silica can cause silicosis or other
delayed and serious lung injury. No exposure to respirable Crystalline (quartz)
Silica anticipated with recommended use of product. Existing respiratory or skin
ailments may be aggravated by exposure. This product contains solvents. Reports
associate repeated and prolonged occupational overexposure to solvents with
permanent brain and nervous system damage. Reports also indicate that
solvents cause liver damage, kidney damage, and mucous membrane irritation. Be
warned that intentional misuse by deliberately inhaling the vapors and/or the
product contents (a process often called "sniffing") can be harmful or fatal. This
product contains isocyanates. Prolonged repeated exposure to isocyanates can
lead to skin sensitization. For persons so sensitized even brief exposures to an
isocyanate can produce reddening, swelling, rash, or blisters. Similarly, prolonged
and repeated exposure to isocyanates can lead to respiratory sensitization. In
such individuals, brief exposures to isocyanates at levels well below established
exposure limits can produce chemical asthma and nonspecific asthmatic
conditions.
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
3
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
4. FIRST AID MEASURES
Eye contact Flush eyes with water, lifting upper and lower lids occasionally for 15 minutes.
Seek m e d i c a l attention
Skin contact Remove contaminated clothing. Wash thoroughly with soap and water. If irritation
persists seek medical attention. Wash contaminated clothing before reuse.
Ingestion Do not induce vomiting without medical advice. If conscious, drink plenty of water. If
Person feels unwell or symptoms of skin irritation appear, consult a physician. If a
person vomits, place him/her in the recovery position. Never give anything by
mouth to an unconscious person.
Inhalation Remove victim from exposure. If difficulty with breathing, administer oxygen. If breathing
has stopped administer artificial respiration, preferably mouth-to-mouth. Seek immediate medical attention.
5. FIRE-FIGHTING MEASURES
Fire and Explosion Hazards Containers can build up pressure if exposed to heat (fire). Cool closed containers
Flash point 250.00 癋 121.11 Method: Taglibue C. C.
Autoignition temperature no data available
Lower explosion limit
1.6 %(V)
Upper explosion limit
10.2 %(V)
Suitable extinguishing media carbon dioxide (CO2) dry chemical
water fog
exposed to fire with water spray.
Special Fire-fighting Procedures : As in any fire, wear pressure demand self-contained breathing apparatus (NIOSH
approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Methods for cleaning up Wear appropriate protective equipment (refer to section 8). Take action to eliminate
source of leak; prevent from entry into open streams or sewers; contain spill by diking;
vacuum up liquid or use absorbent media; remove to storage for disposal and rinse
r e sid u al st ain wi t h w ater
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
4
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
7. HANDLING AND STORAGE
Handling Keep out of reach of children. For personal protection see section 8.
Storage Keep tightly closed.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Wear as appropriate: safety glasses with side-shields goggles
face shield
Wear as appropriate: impervious gloves
Wear as appropriate: impervious clothing
preventive skin protection
In case of insufficient ventilation wear suitable respiratory equipment. When workers are facing concentrations above the
exposure limit they must use NIOSH approved respirators.
Avoid contact with skin, eyes and clothing. Ensure adequate ventilation, especially in confined areas. Wash hands before breaks and
at the end of workday. When using, do not eat, drink or smoke. Handle in accordance with good industrial hygiene and safety practice.
Engineering Controls Local exhaust ventilation can be necessary to control any air contaminants to within their TLVs during the
use of this product.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color char
Physical State liquid
Odor mild oily
pH not applicable
Odor Thresholds n o d a t a a v a il a b l e
Vapor Pressure no data available
Vapor Density Heavier than air
Boiling point / range 342.00 - 514.00 癋 (172.22 - 267.78 癈)
Freeze Point n o d a ta a v a ila b le
Water solubility slightly soluble
Specific Gravity 1.25
Viscosity no data available
Evaporation rate Slower than Butyl acetate
Partition coefficient (n- no data available
octanol / water)
VOC Concentration as applied 45 g/l
(less water exempt solvents)
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
5
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
10. STABILITY AND REACTIVITY
Stability Stable under recommended storage conditions.
Conditions to avoid Strong oxidizing agents
Materials to avoid Oxides of carbons
Hazardous decomposition products Thermal decomposition
MDI vapors Irritating or toxic fumes
Hazardous polymerization Will not occur under normal conditions.
11. TOXICOLOGICAL INFORMATION
Acute inhalation toxicity
Type Value Species Exposure time
Product LC50 no data available
Component
HYDROTREATED MIDDLE PETROLEUM LC50 no data available
DISTILLATES
POLYMETHYLENE POLYPHENYL ISOCYANATE LC50 no data available
METHYLENE BISPHENYLISOCYANATE F no data available
LD50
POLYPHEMETHYL Type
(Oral) LD50 (Oral)
NE BlSPHENYL LD50 (Oral)
ISOCYANATE
DllSOCYANATE
Acute oral
toxicity Product
Component
HYDROTREATED
MIDDLE
PETROLEUM LD50 (Oral)
DIS T ILLATES
POLYMETHYLENE
POLYPHENYL
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
6
Material Safety Data Sheet - BURKE FLOORING BR-710 One
Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
n ata available no
Value Species o data available
no data available 9,200 mg/kg
d
Acute dermal toxicity
Type Value Species
Product LD50 (Dermal) no data available
Component
HYDROTREATED MIDDLE PETROLEUM
DISTILLATES
POLYMETHYLENE POLYPHENYL ISOCYANATE
LD50 (Dermal) no data available
METHYLENE BlSPHENYL DlISOCYANATE
no data available
LD50 (Dermal)
no data available
LD50 (Dermal)
12. ECOLOGICAL INFORMATION
Ecotoxicological lnformation : There is no data available for this product.
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
7
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
13. DISPOSAL CONSIDERATIONS
Recommendations: Use excess product in an alternate beneficial application. Handle disposal of waste
material in manner which complies with local, state, province and federal regulation.
14. TRANSPORT INFORMATION
DOT : Proper shipping name Not regulated
IATA : Proper shipping name Not regulated
15. REGULATORY INFORMATION
SARA 311/312 (RTK)
This product has been reviewed according to the EPA 'Hazard Categories' promulgated under Sections 311 and 312 of the
Superfund Amendments and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to
meet the following categories:
IMMEDIATE (ACUTE) HEALTH HAZARD DELAYED (CHRONIC) HEALTH HAZARD
SARA 313
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
Weight % CAS No. Chemical Name
n nn - nn 9n1R-117 METHYLENE BISPHENYL DIISOCYANATE
CERCLA
CERCLA section 103(a) specifically requires the person in charge of a vessel or facility to report immediately to the National
Response Center (NRC) a release of a hazardous substance whose amount equals or exceeds the assigned RQ. The
following hazardous substances are contained in this product.
RQ CAS No. Chemical Name
5.000 lbs 101-68-8 METHYLENE BISPHENYL DIISOCYANATE
TSCA Section 12(b) Export Notification
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(b) if exported from
t he Unit ed St ates: There are no TSCA 12(b) Chemicals in this product.
California Proposition 65
The chemical(s) noted below and contained in this product, are known to the state of California to cause cancer, birth defects
or other reproductive harm. Unless otherwise specified in Section 2 of this MSDS, these chemicals are present at < 0.1%:
CAS No. Chemical Name
SILICA. CRYSTALLINE QUARTZ
14808-60-7
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
8
Material Safety Data Sheet - BURKE FLOORING BR-710 One Part Urethane Adhesive
by CHEMREX?CX-941
Version 1.5 06/27/2008
7440-43-9 CADMIUM
7439-92-1I N O R G A N I C L L E A D
7440-38--2 ARSENIC
16. OTHER INFORMATION
Legend : N.E. - Not Established
TI V - Threshold Limit Value
STEL Short Term Exposure Limit
PEL - Permissible Exposure Limit
CEIL - Ceiling
Prepared By : Environment, Health and Safety Department
This information is furnished without warranty, representation, or license of any kind, except that this information is accurate to the
best of the manufacturers knowledge, or is obtained from sources believed by the manufacturer to be accurate and is not intended
to be all inclusive. No warranty is expressed or implied regarding the accuracy of this information or the results to be obtained from
its use thereof. The manufacturer assumes no responsibility for injuries proximately caused by use of the Material if reasonable
safety procedures are not followed as stipulated in this Data Sheet. Additionally, the manufacturer assumes no responsibility for
injuries proximately caused by abnormal use of the Material even if reasonable safety procedures are followed. Buyer assumes the
risk in its use of the Material
End of MSDS
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500
|