MATERIAL SAFETY DATA SHEET
Page 1 of 5
SIKATACK ULTRAFAST
HMIS
HEALTH 2
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corp. Sika Corp.
201 Polito Ave. 201 Polito Ave.
Lyndhurst, NJ 07071 U.S.A. Lyndhurst, NJ 07071 U.S.A.
Company Contact: Kristin Kelley Company Contact: Kristin Kelley
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikasolutions.com Web Site: www.sikasolutions.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 08/20/2001
Product Name: SIKATACK ULTRAFAST
CAS Number: Not Established
Chemical Family: POLYURETHANE
MSDS Number: 1329
Product Code: NO. 268-543
Synonyms
NO. 268-543
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
METHYLENE BISPHENYLISOCYANATE 101-68-8 0.6 - 1
XYLENE (MIXED ISOMERS) 1330-20-7 1 -5
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation. May cause skin sensitization.
Ingestion Hazards
May be harmful if swallowed.
MATERIAL SAFETY DATA SHEET Page 2 of 5
SIKATACK ULTRAFAST
3. Hazards Identification - Continued
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
RINSE EYES THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN.
Skin
WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
IF SYMPTOMS PERSIST CONSULT PHYSICIAN.
Ingestion
DILUTE WITH WATER. CONTACT PHYSICIAN.
Inhalation
REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, INSTITUTE ARTIFICIAL RESPIRATION. CONSULT
WITH PHYSICIAN.
5. Fire Fighting Measures
Flash Point: N/AV 癋
Autoignition Point: N/AV 癋
Fire And Explosion Hazards
DURING A FIRE, IRRITATING AND/OR TOXIC GASES AND AEROSOLS FROM THE
DECOMPOSITION/COMBUSTION PRODUCTS MAY BE PRESENT.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
AVOID CONTACT. VENTILATE AREA. REMOVE PHYSICALLY AND PLACE IN SUITABLE CONTAINERS.
7. Handling And Storage
Handling And Storage Precautions
KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAME. STORE IN TIGHTLY CLOSED CONTAINER AND
PROTECT FROM MOISTURE AND FOREIGN MATERIAL. STORAGE TEMPERATURE 32F MINIMUM - 122F
MAXIMUM. IF CLOSED CONTAINER OF MATERIAL IS EXPOSED TO HEAT, PRESSURE CAN BUILD UP. IF
MOISTURE ENTERS DRUM, PRESSURE BUILD UP DUE TO REACTION. AT MAXIMUM STORAGE
TEMPERATURE NOTED, MATERIAL MAY POLYMERIZE WITHOUT HAZARD. IDEAL STORAGE TEMPERATURE
IS 50-81F.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Eye/Face Protection
Safety glasses with side shields or goggles.
MATERIAL SAFETY DATA SHEET Page 3 of 5
SIKATACK ULTRAFAST
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection - Continued
Skin Protection
AVOID SKIN CONTACT. WEAR LONG SLEEVE SHIRT AND LONG PANTS. CHEMICAL RESISTANT GLOVES.
Respiratory Protection
In areas where the P.E.L.s are exceeded, use a properly fitted NIOSH-approved respirator.
Other/General Protection
WASH THOROUGHLY AFTER HANDLING.
Ingredient(s) - Exposure Limits
METHYLENE BISPHENYL ISOCYANATE
ACGIH TLV-TWA 0.005 ppm
OSHA PEL-CEILING 0.02 ppm
XYLENE (MIXED ISOMERS)
ACGIH TLV-STEL 150 ppm
ACGIH TLV-TWA 100 ppm
OSHA PEL-TWA 100 ppm
9. Physical And Chemical Properties
Appearance
BLACK PASTE
Odor
AROMATIC
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/AV 癋
Boiling Point: N/AV 癋
Specific Gravity: 1.2
Percent VOCs: 3%
Packing Density: 9.8 #/GAL
Vapor Pressure: N/AV
Vapor Density: N/AV
Solubility: INSOLUBLE
Evaporation Rate: SLOWER THAN ETHER
V.O.C. - .3 lbs./gallon
10. Stability And Reactivity
Sta bility: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
OPEN FLAME
Incompatible Materials
WATER, ALCOHOL, AMINES
Hazardous Decomposition Products
CO, CO2, OXIDES OF NITROGEN
Conditions To Avoid (Polymerization)
NONE KNOWN
MATERIAL SAFETY DATA SHEET Page 4 of 5
SIKATACK ULTRAFAST
11. Toxicological Information
Miscellaneous Toxicological Information
OVEREXPOSURE TO XYLENE MAY CAUSE KIDNEY AND/OR LIVER EFFECTS.
Conditions Aggravated By Exposure
EYE DISEASE, SKIN DISORDERS AND ALLERGIES, CHRONIC RESPIRATORY CONDITIONS
Ingredient(s) - Carginogenicity
METHYLENE BISPHENYL ISOCYANATE
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
NOT REGULATED PER D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the
Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372. This information must be
included in all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
METHYLENE BISPHENYL ISOCYANATE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
XYLENE (MIXED ISOMERS)
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
Ingredient(s) - State Regulations
METHYLENE BISPHENYL ISOCYANATE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
XYLENE (MIXED ISOMERS)
New Jersey - Workplace Hazard
MATERIAL SAFETY DATA SHEET Page 5 of 5
SIKATACK ULTRAFAST
15. Regulatory Information - Continued
Ingredient(s) - State Regulations - Continued
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
He a lth: 2
Fire : 1
Re a ctivity: 0
PPE: C
Revision/Preparer Information
This MSDS Supercedes A Previous MSDS Dated: 10/12/2000
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use in
combination with any other materialor in any process. The information set forth herein is based on technical da ta
that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make no
warranties, express or implied andassume no liability in connection with any use of this information. Nothing herein
is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corp.
Printed Using MSDS GeneratorTM 2000
|