KO-14 MSDS
Green / Gray Cork/Rubber Combo
Product Identification
Cork / Rubber Combination
Chemical Name:
N/A
Chemical Family:
Cork / Rubber Combo
Product Description:
Hazardous Ingredient Information
Chemical Name CAS Number Approximate%
Cork Granule 61789-98-878 N/A
Methylene bisphenyl isocyanate N/A .02
MDI, 4,4 Diphenylmethane diisocyanate 101-68-8 .02ppm ceiling
The composition of this mixture may be considered proprietary information. In the event of a medical
emergency, compositional information will be provided to a physician or nurse.
Health Information & Protection
Nature of Hazard
Particulates may cause eye irritation.
Eye Contact:
No hazard expected in normal industrial use
Skin Contact:
No hazard expected at ambient temperature
Inhalation:
Not expected in normal industrial use
Ingestion:
First Aid
Flush with water for 5 minutes.
Eye Contact:
Contact a physician if irritation persists.
Wash with soap and water
Skin Contact:
N/A
Inhalation:
Contact a physician
Ingestion:
Precautions
General exhaust recommended
Ventilation:
Safety goggles and an OSHA approved particulate respirator are fecommended
Personal Protection:
for cutting grinding and sawing operations.
Practice good industrial hygiene
Other Precautions:
Fire & Explosion Data
Unknown
Flash Point:
Water Fog, ABC Chemical
Extinguishing Media:
Special Firefighting Procedures: This material will burn in case of fire. Wear a self-contained breathing
apparatus to prevent inhalation of toxic combustion gases.
1
Typical Physical & Chemical Properties
.27 Negligible
Specific Gravity: Vapor Pressure:
Insoluble N/A
Solubility in H2O: Evaporation Rate:
N/A N/A
Freezing / Melting Point: Vapor Density:
N/A
Boiling Point:
Reactivity Data
Stable
Stability:
Will not Occure
Hazardous Polymerization:
None
Incompatibility / Materials to avoid:
Do not use or store near flame.
Condidtions to Avoid:
If burned ?Smoke, soot and toxic fumes, including carbon
Hazardous Decomposition Products:
monoxide and carbon dioxide
Spill & Leak Procedures
Apply normal clean-up procedures and store for re-use or disposal.
Spill Procedure:
Dispose of in accordance with all Federal, State, and local
Waste Disposal:
regulations. Contact local environmental authorities for approved
disposal of this material.
Storage & Handling
Ambient
Storage Temperature:
Atmospheric
Storage / Transport Pressure:
None
Special Precautions for Hdlng. & Storage:
MSDS
KO-8, KO-9, & KO-14 cork and cork rubber products and manufactured parts or products are classified
as "articles" in OSHA's Hazard Communication Standard, 29 CFR 1910.1200 (b) (6) (v) and defined in section
C of that standard. They have an end use dependent upon their shape or design and do not release or otherwise
result in exposure to hazardous chemicals under normal conditions of use. Therefore, MSDS sheets for
individual products are not required or available.
ODS
In support of the ongoing efforts to preserve the environment Kodiak Corporation is proud to relay that
no Ozone Depleting Substances (ODS's) are contained in or used in the manufacture of our cork and cork
rubber products.
2
Shelf Life
It is reasonable to expect Cork Composition materials to retain their original physical properties for at
least two (2) years from the date of manufacture if stored under normal ambient conditions. It is also reasonable
to expect Cork Rubber materials to retain their original physical properties for at least five (5) years from the
date of manufacture if stored under normal ambient conditions. Extreme temperatures and/or humidity during
storage are the key factors contributing to any loss in physical properties. We at Kodiak Corporation expect our
materials to last indefinitely. However, beyond the stated periods above, Kodiak Corporation would need to
retest the material in order to reissue certification. Ultimate acceptance and functionality must always be
determined for the application by the end user.
Note: Information herein is based on laboratory test data which is believed to be reliable. However Kodiak Corporation, has no
control over the end application of these materials. Therefore, we cannot guarantee that the same results as described herein will be
obtained
Note: It is recommended that each user conduct his / her own tests to determine adaptability of these materials to his / her particular
application.
3
|