MATERIAL SAFETY DATA SHEET
.
1. Product and Company Identification
space
Product name CC-915 Sealant/Adh Series
space
MSDS name CC-915 Sealant/Adhesives - Various Colors
space
Product name(s) covered See Section 16 for Product Names Covered.
space
CAS # Mixture
space
Generic description Polyurethane Sealant
space
Manufacturer Bostik, Inc.
211 Boston Street
Middleton, MA 01949 USA
space
24 hour emergency Telephone: 1-800-227-0332
assistance
space
General assistance Telephone: 1-978-777-0100
space
MSDS assistance Telephone: 1-414-607-1347
.
2. Hazards Identification
space
Emergency overview This product is irritating to the eyes and skin. Thermal decomposition/burning may produce
toxic gases and fumes. Closed containers may rupture when exposed to high temperatures, or
when the product has been contaminated with water.
Avoid breathing hot mists and vapors. This product contains a respiratory and skin sensitizer.
Causes respiratory tract irritation and may cause allergic respiratory reaction. May cause
permanent respiratory damage. Product vapors are potentially irritating to skin. May cause
allergic skin reaction and dermatitis.
space
Potential health effects
Eyes May cause irritation with temporary redness with stinging and tearing.
space
Skin Skin contact may cause irritation. Isocyanates may react with skin protein and moisture to
cause itching, reddening, swelling, scaling or blistering. Individuals previously sensitized to this
material may experience these symptoms from exposure to very small amounts of liquid or
vapor.
space
Inhalation Single large does, and/or repeated exposures, may lead to sensitization to diisocyanates or
polyisocyanates (asthma or asthma-like symptoms), causing an individual to experience
adverse effects at exposure levels well below exposure limits or guidelines. Symptoms may
include chest tightness, wheezing, shortness of breath, coughing or asthmatic attack, and may
be delayed up to several hours. Extreme asthmatic reactions can be life threatening. Once
sensitized, an individual may experience adverse symptoms upon exposure to dust, cold air or
other irritants. Sensitization can last several months, years or be permanent in some cases.
space
Ingestion May cause irritation and corrosive action in the mouth, throat and digestive tract.
space
Target organs The lungs and skin may be targeted and damaged by components of this product.
space
Signs and symptoms Signs and symptoms of overexposure to this product include headache, irritation of upper
respiratory tract, asthmatic symptoms, chest tightness, breathing difficulty, coughing, sore
throat, eye irritation, skin irritation and/or diarrhea.
space
Hazard statements This product contains Methylene Diphenyl Isocyanate (MDI) which is a potential skin sensitizer
and has been shown to alter cells in certain experiments. Although inconclusive, these cellular
changes are thought to indicate potential carcinogenicity. Risk to your health depends on
duration and concentration of exposure.
.
3. Composition / Information on Ingredients
space
Hazardous components CAS # Percent
Xylenes (o-, m-, p- isomers) 1330-20-7 1-5
Methylene Diphenyl Isocyanate (MDI) 101-68-8 0.1 - 1
Phenylethane 100-41-4 0.1 - 1
Material name: CC-915 Sealant/Adh Series MSDS US
1/5
50014 Version #: 05 Revision date: 01-22-2009 Print date: 01-22-2009
.
4. First Aid Measures
space
First aid procedures
Eye contact Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention or
advice.
space
Skin contact Remove contaminated clothing to prevent further skin exposure and dispose of properly. In
situations involving considerable skin contact, place the contaminated person in a deluge
shower for at least 15 minutes. For minor exposures, wash thoroughly with soap and clean
water. Get medical attention if irritation persists.
space
Inhalation Remove to fresh air. Get medical attention immediately for a large dose exposure or if cough
or other symptoms develop. Administer oxygen or artificial respiration as needed.
space
Ingestion If ingested, get immediate medical attention. Do not induce vomiting unless instructed to do so
by medical personnel. Never give anything by mouth to a victim who is unconscious or is
having convulsions.
space
Notes to physician Treat symptomatically and supportively. Contact Bostik to determine whether any additional
information is available.
Eyes: Stain for evidence of corneal injury. If cornea is burned, apply antibiotic/steroid
preparation as needed.
Skin: This product contains a skin sensitizer. Treat symptomatically as for contact dermatitis or
thermal burn.
Ingestion: Treat symptomatically.
Inhalation: This material contains a known pulmonary sensitizer.
Any individual experiencing dermal or pulmonary sensitization should be removed from
exposure to any diisocyanate. May aggravate existing heart conditions, particularly those with
abnormal heart rhythms. If overexposure to the solvents in this product is suspected, testing
should include nervous system and brain effects including recent memory, mood,
concentration, headaches and altered sleep patterns. Liver and kidney function should be
evaluated. This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the
affected person appropriately.
.
5. Fire Fighting Measures
space
Hazardous combustion Additional decomposition products include oxides of nitrogen, amines, hydrogen cyanide and
products isocyanate-containing compounds.
space
Extinguishing media
Suitable extinguishing Use dry chemical, carbon dioxide, or foam. Water spray (fog).
media
space
Fire fighting Firefighters should wear NFPA compliant structural fire fighting protective equipment, including
equipment/instructions a self-contained breathing apparatus, helmet, hood, boots and gloves. Avoid contact with
isocyanates. During a fire, isocyanate vapors and other irritating and highly toxic gases may be
produced.
space
Dust explosion hazard None Known
space
Sensitivity to static discharge None Known
space
Flash point 166 癋 (74.4 癈)
.
6. Accidental Release Measures
space
Emergency action Appropriate safety measures and protective equipment should be used. See Section 8. Do not
discharge to lakes, streams, ponds, or sewers. Dispose of in compliance with local, state, and
federal regulations.
space
Spill or leak procedure Scrape up paste and place in steel drums that are in good condition. Thoroughly clean area
where spill occurred.
space
Containment procedures Isolate spill area. Stop discharge if safe to do so. Stop material from contaminating soil or from
entering sewers or water streams.
space
Reporting See Federal reporting requirements listed in Section 15. We recommend you contact local
authorities to determine if there may be other local reporting requirements.
Material name: CC-915 Sealant/Adh Series MSDS US
2/5
50014 Version #: 05 Revision date: 01-22-2009 Print date: 01-22-2009
.
7. Handling and Storage
space
Handling Wash hands thoroughly after handling, especially before eating, drinking, smoking, and using
restroom facilities. Wash contaminated goggles, face shields, and gloves. Professionally
launder contaminated clothing before re-use. Do not breathe vapors, mists or dusts. Do not
breathe fumes generated when the material is overheated or burned. Use adequate ventilation.
Wear respiratory protection if the material is heated, sprayed, used in a confined space or if
exposure limit is exceeded. This product can produce asthmatic sensitization. Individuals with
lung or breathing problems or prior allergic reactions to isocyanates must avoid fumes from
this product. Wear appropriate protective equipment to avoid contact with skin and eyes.
space
Storage Store in a cool, dry, well-ventilated area away from heat, ignition sources and direct sunlight.
Water contamination should be avoided. Cool location should be 60-80 degrees F or 15-30
degrees C.
space
Empty container precaution Attention! Follow label warnings even after container is emptied since empty containers may
retain product residues. Do not reuse empty container without professional cleaning for food,
clothing, or products for human or animal consumption, or where skin contact can occur.
.
8. Exposure Controls / Personal Protection
space
Engineering controls Use local exhaust or general ventilation where the potential exists to exceed the PEL or TLV
exposure limits.
space
Personal protective equipment
Eye protection Wear goggles or safety glasses with side shields.
space
Skin and body protection Wear appropriate clothing to minimize skin contact with this product.
space
Respiratory protection Avoid breathing vapor and/or mists. If airborne concentrations are above the applicable
exposure limits, use NIOSH approved respiratory protection. High airborne concentrations may
necessitate the use of self-contained breathing apparatus (SCBA) or a supplied air respirator.
space
General Eyewash fountains and emergency showers should be readily available.
space
Additional exposure data
US ACGIH Threshold Limit Values: Time Weighted Average (TWA): mg/m3 & ppm
Phenylethane 100-41-4 ETHYL BENZENE 100 PPM
Methylene Diphenyl Isocyanate 101-68-8 METHYLENE BISPHENYL ISOCYANATE (MDI) 0.005 PPM
(MDI)
Xylenes (o-, m-, p- isomers) 1330-20-7 XYLENE (O, M AND P ISOMERS) 100 PPM
US NIOSH Pocket Guide to Chemical Hazards: Ceiling Limit Value and Time Period (if specified)
Methylene Diphenyl Isocyanate 101-68-8 METHYLENE BISPHENYL ISOCYANATE 0.2 MGM3 - 0.020 PPM 10-min
(MDI)
US OSHA Table Z-1-A: Time Weighted Average (TWA): mg/m3 & ppm
Phenylethane 100-41-4 ETHYLBENZENE 435 MGM3 - 100 PPM
Xylenes (o-, m-, p- isomers) 1330-20-7 XYLENE (O-, M-, P- ISOMERS) 435 MGM3 - 100 PPM
.
9. Physical & Chemical Properties
space
Target solids 96 %
space
Density 1.346 g/cc
space
Odor Solvent
space
Color Various
space
Physical state Paste
space
Freeze protect No
space
VOC (Volatile Organic 3.9 %
Compounds)
.
10. Chemical Stability & Reactivity Information
space
Hazardous Unknown due to the complex nature of this material. Fumes from complete or incomplete
reactions/decomposition combustion may include carbon dioxide, carbon monoxide, water vapor, oxides of nitrogen and
products a wide variety of innocuous or toxic fumes. Additional decomposition products include oxides
of nitrogen, amines, hydrogen cyanide and isocyanate-containing compounds.
space
Hazardous polymerization Hazardous polymerization can occur with elevated temperatures or contact with water.
space
Conditions to avoid Avoid Strong Acids. Avoid amines, strong bases, alcohols and metallic hydrides.
Material name: CC-915 Sealant/Adh Series MSDS US
3/5
50014 Version #: 05 Revision date: 01-22-2009 Print date: 01-22-2009
space
Stability This product is stable under normal conditions but will react slightly with water to release some
heat and carbon dioxide. The reaction is not violent. Carbon dioxide, carbon monoxide and in
high temperature (800?F) low oxygen atmospheres such as in fire situations, hydrogen
cyanide may be released.
.
11. Toxicological Information
space
Carcinogenicity This product contains Methylene Diphenyl Isocyanate (MDI). MDI is not listed by the NTP,
IARC or regulated by OSHA as a carcinogen. However, it has been shown to alter cells in
certain experiments. Although inconclusive, these cellular changes are thought to indicate
potential carcinogenicity.
space
Local effects Single large does, and/or repeated exposures, may lead to sensitization to diisocyanates or
polyisocyanates (asthma or asthma-like symptoms), causing an individual to experience
adverse effects at exposure levels well below exposure limits or guidelines. Symptoms may
include chest tightness, wheezing, shortness of breath, coughing or asthmatic attack, and may
be delayed up to several hours. Extreme asthmatic reactions can be life threatening. Once
sensitized, an individual may experience adverse symptoms upon exposure to dust, cold air or
other irritants. Sensitization can last several months, years or be permanent in some cases.
Chronic exposure may cause lung damage, including fibrosis and decreased lung function,
which may be permanent.
.
12. Ecological Information
space
Ecotoxicological information Organic solvents produce slight to moderate toxicity to aquatic life.
.
13. Disposal Considerations
space
It is the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable
local, state and federal regulations.
space
Waste disposal Dispose of waste material according to Local, State, Federal, and Provincial Environmental
Regulations.
.
14. Transport Information
space
DOT
Not regulated as hazardous goods.
space
IATA
Not regulated as hazardous goods.
space
IMDG
Not regulated as hazardous goods.
.
15. Regulatory Information
space
This MSDS is prepared and distributed pursuant to the Federal Hazard Communication Standard, 29 CFR 1910.1200.
space
Federal regulations All components are on the U.S. EPA TSCA Inventory List.
US CWA Section 311 Reporting Quantities of Hazardous Substances: Reportable quantity
Phenylethane 100-41-4 ETHYLBENZENE 1000 LBS
Xylenes (o-, m-, p- isomers) 1330-20-7 XYLENE (MIXED) 100 LBS
US TSCA Section 12(b) Export Notification: Export Notification requirement/De minimis concentration
Xylenes (o-, m-, p- isomers) 1330-20-7 P-XYLENE
space
State regulations If this product contains any ingredients listed under California Proposition 65, they will be
noted below:
US - California Proposition 65 - CRT: Listed date/Carcinogenic substance
Phenylethane 100-41-4 Listed: June 11, 2004 Carcinogenic.
US - California Proposition 65 - CRT: Listed date/Developmental toxin
Diisodecyl Phthalate (DIDP) 68515-49-1 Listed: April 20, 2007 Developmental toxin.
space
International regulations This product has been classified in accordance with the hazard criteria of the Controlled
Products Regulations and contains all the information required by the Controlled Products
Regulations.
Material name: CC-915 Sealant/Adh Series MSDS US
4/5
50014 Version #: 05 Revision date: 01-22-2009 Print date: 01-22-2009
space
HMIS Ratings Health: 2*
Flammability: 2
Physical hazard: 0
Personal protection: X
space
SARA 311/312 HAZARD Immediate Hazard - Yes
CATEGORIES Delayed Hazard - Yes
Fire Hazard - Yes
Pressure Hazard - No
Reactivity Hazard - No
space
WHMIS status Controlled
space
WHMIS labeling
space
WHMIS classification D2A - Other Toxic Effects-VERY TOXIC
D2B - Other Toxic Effects-TOXIC
.
16. Other Information
space
Product name(s) covered A27010 - CC-915 WHITE 24/10.1
A27028 - CC-915 WHITE S/PK 12/20.0
space
A28310 - CC-915 STONE 24/10.1
space
A28324 - CC-915 STONE S/PK 12/20.0
space
A28410 - CC-915 LIMESTONE 24/10.1
space
A28412 - CC-915 LIMESTONE S/PK 12/20.0
space
A28423 - CC-915 LIMESTONE UNLAB 24/10.1
space
A28426 - CC-915 LIMESTN UNL S/P 12/20.0
A28510 - CC-915 BRONZE 24/10.1
space
A28523 - CC-915 BRONZE S/PK 12/20.0
space
A28610 - CC-915 TAN 24/10.1
space
A28619 - CC-915 TAN S/PK 12/20.0
space
A28710 - CC-915 BLACK 24/10.1
space
A28724 - CC-915 BLACK S/PK 12/20.0
space
A30610 - CC-915 MEDIUM BRONZE 24/10.1
space
A30710 - CC-915 ALMOND 24/10.1
A30712 - CC-915 ALMOND S/PK 12/20.0
space
A33710 - CC-915 ALUMINUM STONE 24/10.1
space
A33715 - CC-915 ALUM-STONE S/PK 12/20.0
space
A39212 - CC-915 CORAL RED 24/10.1
space
A39312 - CC-915 TERRA COTTA 24/10.1
space
A61210 - CC-915 HUNTER GREEN 24/10.1
space
A65714 - CC-915 LIGHT GRAY 24/10.1
space
Disclaimer The data in this MSDS has been compiled from publicly available sources. This data relates
only to the designated product and not to the use of said product in combination with other
materials. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only
hazards which exist. Responsibility for proper precautions and safe use of the product lies with
the user. All data in this MSDS is typical of the product as a whole, and does not represent any
individual lot or batch, therefore, Bostik, Inc. makes no warranty about the accuracy of the
data herein and assumes no liability for the use of such data. It is the responsibility of the user
to comply with all applicable federal, state, and local laws and regulations.
space
Issue date 01/22/2009
space
Prepared by Pam Larsen
space
Supercedes 10/14/2008
space
This data sheet contains Regulatory Information: Regulatory Ratings
changes from the previous
version in section(s):
Material name: CC-915 Sealant/Adh Series MSDS US
5/5
50014 Version #: 05 Revision date: 01-22-2009 Print date: 01-22-2009
|