Part Number(s):
MATERIAL SAFETY DATA SHEET 51-300-01
Form WI04-11A Rev. 1
Product Name: Exactabond for plastic powder Release Date: April 9, 2007
1. Product and Company Identification
Trade Name & Synonyms MSDS Code Number
Suspension Polymer Refer to part number
Chemical Name Manufacture / Distributor
Acrylic copolymer-exactabond plastic powder. Product identifier: 26F GAC International Inc.
C.A.S. Number Address
9003-42-3 355 Knickerbocker Ave.
Bohemia, NY USA 11716
Grades or Minor Variant Identities Information Telephone Number
NA 1-631-419-1700
Product Use (for Canada) Emergency Telephone Number
Vehicle for denture base 1-631-419-1700
2. Composition of Ingredients
Hazardous Components C.A.S. Number Exposure Limits %
Compound registry No. Range (%)
Ethyl methacrylate polymer 9003-42-3 NA 97.7
Ethyl methacrylate 97-63-2 NA 2.0
* Methy methacrylate 80-62-6 NA 0.3
Compound OSHA ACGIH IARC NTP LD50 LC50
PEL TLV LIST LIST
Ethyl N/A N/A No No No No
Methacrylate
polumer
Ethyl
methacrylate N/A N/A No No 14.8 No
g/kg(1)
*Methyl 100ppm 100ppm No No No No
methacrylate
A * before the compound name indicates that compound is a
SARA Title III Section 313 "Toxic chemical".
(1) = IN RATS
N/A ?Not applicable
3. Hazard Identification
Emergency Overview
NA
Routes of Signs and Symptoms Single, Repeated, or Severity (Mild, Acute and Chronic Target
Exposure Lifetime Exposure Moderate, Severe) Health Effect(s) Organ(s)
Red irritated eyes, itching NA NA Acute: Can produce mechanical NA
Eye
and feeling that a particle irritation to the eye.
exists between eyelid and Chronic: N/D. Not believed
eye. significant. Exposure limits: N/A
Irritancy of product: Eye irritant.
Sensitization t o product: N/D
NA NA NA NA NA
Skin
NA NA NA NA NA
Inhalation
NA NA NA NA NA
Ingestion
Reproductive toxicity: NA NA NA NA
Other
N/D. Teratogenicity:
N/D.
Mutagenicity: N/D
Medical Conditions Aggravated by Exposure
N/A
Carcinogenicity (IARC, NTP)
Page 1 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-300-01
Form WI04-11A Rev. 1
Product Name: Exactabond for plastic powder Release Date: April 9, 2007
N/D.
Potential Environmental Effects
NA
4. First Aid Measures
Routes of Exposure First Aid Instructions Immediate Medical Attention Delayed Effects
Flush eyes with copious quantities If irritation persists, see a NA
Eye
of water for 15 minutes. physician.
Flush eyes with copious quantities If irritation persists, see a NA
Skin
of water for 15 minutes. physician.
NA NA NA
Inhalation
NA NA NA
Ingestion
NA NA NA
Other
Note to Physicians (Treatment, Testing, and Monitoring)
NA
5. Fire and Explosion Data
Flashpoint & Method: Flammable (Explosive) Limits in Air Autoignition Temperature Other
癈 / 癋 N/A LEL: N/A UEL: N/A N/A
Hazardous combustion
Properties Contributing to Flammability Classification products: N/A
Flame Propagation or Burning
Fire Intensity Health- , Flammability- , Reactivity-
Non-flammable
Conditions of flammability: NFPA Fire hazard class: 0, Non-
N/A flammable. TDG Flammability
classification: N/A. Non-flammable.
Extinguishing Media Extinguishing Media to Avoid
Dry chemical, carbon dioxide or water fog. NA
Protection and Procedures for Firefighters
Wear MSHA / NIOSH approved pressure demand, self-contained breathing apparatus. Guard against contact of product with eyes during salvage
operation.
Unusual Fire and Explosion Hazards
Explosion data: Sensitivity to mechanical impact: N/A. Sensitivity to static discharge: N/A
6. Accidental Release Measures
Containment Techniques
NA
Spill/Leak Clean-Up Procedures and Equipment
Sweep area of product, collecting in a container for disposal. Areas of spill can be extremely slippery. All normal safety precautions should be
observed.
Evacuation Procedures
NA
Special Instructions
NA
Reporting Requirements
NA
7. Handling and Storage
Handling Practices and Warnings
No special handling is required beyond those outlined in this MSDS.
Storage Practices and Warnings
Can be stored indoors or outdoors. Should not be stored at temperatures above 140 癋.
Page 2 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-300-01
Form WI04-11A Rev. 1
Product Name: Exactabond for plastic powder Release Date: April 9, 2007
8. Exposure Control/Personal Protection
Ventilation Other Engineering Controls
N/A N/A
Routes of Entry: Personal Protective Equipment (PPE) for Normal Use: PPE for Emergencies:
Eye/Face Chemical safety glasses. NA
Skin Wear impervious gloves and splash goggles while handling. Long sleeve NA
shirts and long trousers are recommended to prevent skin contact. Foot
wear: N/.A
Inhalation N/A NA
General Hygiene Considerations and Work Practices
Flush product from hands with soapy water. Care should be taken to avoid contact with eyes until hands have been completely cleaned. Product has
a tendency to cling to skin due to static charge. Care must be exercised to remove all products from skin. The product causes areas to become
extremely slippery when spilled, and can cause falls. Sweep up spilled material and transfer for proper disposal.
Protective Measures During Repair and Maintenance of Contaminated Equipment
NA
Other Protective Measures and Equipment
NA
9. Physical and Chemical Characteristics
Appearance Odor
White, fine flowing beads. Slight acrylic odor
Boiling Point 癈 / 癋 N/A
Normal Physical State:
Liquid Gas
Melting Point >150癈 / 癋
Solid (Other) Freezing Point 癈 / 癋 N/A
Specific Gravity or Density (H20=1) Solubility in Water pH
NA Insoluble N/A
Vapor Pressure (mm Hg @ 20癈) Vapor Density (AIR= 1) Evaporation Rate (Butyl Acetate = 1)
N/A N/A N/A
Other
Density (g/30ml): 18-21. Coefficient of water / oil distribution: N/D. Odor threshold (ppm): N/D
10. Stability and Reactivity Data
Incompatibility (Materials to Avoid)
N/A
Hazardous Products Produced During Decomposition
Methyl methacrylate and allyl methacrylate. NFPA Reactivity rating: 0, stable.
Hazardous Polymerization? Conditions to Avoid
癈 / 癋
May Occur May Not Occur
Stability? Conditions to Avoid
Stable Unstable Decomposes above 200癈
11. Toxicological Information
Toxicity Data, Epidemiology Studies, Carcinogenicity, Neurological Effects, Genetic or Reproductive Effects, or Structure Activity Data
Toxicologically synergistic products: None known. Carcinogenicity: N/D. Reproductive toxicity: N/D. Teratogenicity: N/D. Mutagenicity: N/D
Page 3 of 4
Part Number(s):
MATERIAL SAFETY DATA SHEET 51-300-01
Form WI04-11A Rev. 1
Product Name: Exactabond for plastic powder Release Date: April 9, 2007
12. Ecological Information
Toxicity, Environmental Fate, Physical/Chemical Data, or Other Data Supporting Environmental Hazard Statements
NA
13. Disposal Considerations
Regulations
NA
Properties (Physical/Chemical) Affecting Disposal
NA
14. Transport Information
Regulated for shipping? Proper Shipping Name Packing Group
Exacatabond for plastic powder NA
Yes No NA
Hazard Class Identification Number
Do changes in quantity, packaging, or shipment method change product classification?
NA NA
Yes No NA
Other
Special shipping information: N/A
15. Regulatory Information
Federal Regulations
NA
International Regulations
NA
Other
NA
16. Other Information
Supplier Number: 28 / 51 Supplier Release: NA
N/A = not applicable. NA = not available, N/E = not established. N/D = not determined.
Page 4 of 4
|