MATERIAL SAFETY DATA SHEET
MSDS
Last changed: 2006-06-01 Internal no.: Replaces date: 2004-05-11
FBM 1 Paint remover
1. PRODUCT AND COMPANY
FBM 1 Paint remover
TRADE NAME
FBM
GROUP NAME
PAINT REMOVER
APPLICATION
1815
ART-NO
TRION TENSID AB
Producer/Importer
Svederusgatan 1-3
Address
754 50 UPPSALA
Zipcode & City
+46 18 15 61 90
Telephone
+46 18 69 66 27
Fax
William Stomilovic
Contact person
Thorbj鰎n Bengtsson
Responsible
William Stomilovic
Issued by
2. COMPOSITION OF PRODUCT
No Ingredients name CAS-NO Conc.(weight%) Rest-list Classification
1 n-methyl-2-pyrrolidone 872-50-4 10-30% Xi,36/38
2 gamma-Butyrolacton 96-48-0 10-30% Xn,22-36
Legend T+=Very toxic, T=Toxic, C=Corrosive, Xn=Harmful, Xi=Irritant, IK=No classification required, E=Explosive, O=Oxidising,
F+=Extremely flammable, F=Very flammable, Fo=Flammable, N=Dang. to the environment, Mut=Genetoxic, Sens=Sensitizing,
Carc=Cancerogen, Repr=Causes birth defects
INGREDIENT COMMENTS
Other components are not classified and are therefore not in the MSDS.
3. HAZARD IDENTIFICATION
Irritating
Irritating to eyes and skin.
4. FIRST AID
GENERAL
Contact a physician if necessary and show this safety data sheet.
INHALATION
Fresh air.
SKIN CONTACT
Wash skin thoroughly with soap and water.
EYE CONTACT
Flush immediately with plenty of water, also under the eyelids. In case of pain/redness - get medical advice.
INGESTION
Give 1-2 glasses of water or preferably milk to drink.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
MSDS
Last changed: 2006-06-01 Internal no.: Replaces date: 2004-05-11
FBM 1 Paint remover
5. FIRE FIGHTING MEASURES
PROPER FIRE FIGHTING EQUIPMENT
CO2, dry chemical, water fog.
IMPROPER FIRE FIGHTING EQUIPMENT
Do not use water jet.
FIRE AND EXPLOSION HAZARDS
May ignite at high temperatures.
PERSONAL PROTECTION WHEN FIRE FIGHTING
Appropriate respiratory protection is necessary.
OTHER INFORMATION
Containers close to fire should be removed immediately or cooled with water.
6. ACCIDENTAL RELEASE MEASURES
SAFETY MEASUREMENTS TO PROTECT PERSONS
Use protective equipment if necessary.
SAFETY MEASUREMENTS TO PROTECT ENVIRONMENT
Dike with sand, earth etc. and collect in appropriate containers according to national regulations.
PROPER METHODS FOR DAMAGE LIMITATION AND CLEAN UP
Absorb with vermiculite, dry sand or earth and transfer to containers. After cleaning, flush away traces with water.
OTHER INFORMATION
Be aware of possible slippery surface.
7. HANDLING AND STORAGE
HANDLING
Keep away from ignition sources. May attack some plastics, rubber and paint.
HANDLING ADVICE
Use containers made of suitable plastic material. Do not mix with bases.
STORAGE
Keep container tightly closed. Keep away from open flames, hot surfaces and sources of ignition. Avoid contact with oxidising
or reducing agents.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Ingredients name CAS-no TLV value TLV Year
872-50-4 25,0 ppm 2002
n-methyl-2-pyrrolidone
EXPOSURE CONTROL
Arrange working conditions and methods to avoid direct contact with the product.
RESP. PROTECTION
Use respiratory protection when handling the product in confined areas. Gas cartridge A (organic substances, brown).
EYE PROTECTION
Wear approved goggles or face shield.
HAND PROTECTION
Always use gloves when there is a possibility of direct contact with the product. Butyl rubber or nitrile rubber. Natural rubber
(latex).
SKIN PROTECTION
Wear suitable protective clothing
OTHER INFORMATION
Remove contaminated clothing immediately and wash contaminated skin as soon as possible.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
MSDS
Last changed: 2006-06-01 Internal no.: Replaces date: 2004-05-11
FBM 1 Paint remover
9. PHYSICAL AND CHEMICAL PROPERTIES
Liquid.
Form
Greenish.
Colour
Faint
Odour
Solubility
Melting point/range Density
-20癈 1080 kg/m3
Expl. limit LEL-UEL., %-%: Solubility in water ~40%
Vapour pressure Saturation conc.
Decomposition temp. Rel. density sat. air (air=1)
pH Solution Boiling point/range
8 180癈
Flash point pH concentrate
>100癈 N/A
Molecular weight Viscosity
Ignition temp Smelling limits lo-hi
Rel. vapour density (air=1) Rel. evap. velocity
Air reactive Water reactive
10. STABILITY AND REACTIVITY
STABILITY
No particular stability concerns.
MATERIALS TO AVOID
The product may react violently and exotermically with strong alkaline.
HAZARDOUS DECOMPOSITION PRODUCTS
Fire causes formation of: Carbon monoxide (CO). Carbon dioxide (CO2).
OTHER INFORMATION
Stable at normal conditions
11. TOXICOLOGICAL INFORMATION
LD50 (oral rat) for NMP 4200 mg/kg
Acute oral tox.
Acute derm. tox.
Inh. toxicity
OTHER TOX. INFORMATION
1580 mg/kg (Gamma-Butyrolacton).
GENERAL
There is little health hazard associated with the normal use of this product. In industry, irritating properties represent the main
hazard.
INHALATION
High concentrations may cause Nausea, vomiting, headache.
SKIN CONTACT
Repeated or prolonged exposure may cause skin irritation and dermatitis, due to the product's defatting properties.
EYE CONTACT
Irritating. May cause intense discomfort, lacrimation and temporary vision impairment.
INGESTION
Nausea, vomiting, diarrhoea, abdominal pains. Aspiration of the product into the lungs is unlikely due to its high viscosity.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
MSDS
Last changed: 2006-06-01 Internal no.: Replaces date: 2004-05-11
FBM 1 Paint remover
12. ECOLOGICAL INFORMATION
MOBILITY
Emulsifies in water.
BREAKDOWN
Expected to be readily biodegradable.
ACCUMULATION
Does not bioaccumulate significantly.
ECOTOXICITY
Exhibits low toxicity to water organisms.
OTHER INFORMATION
Do not discharge product to sewer or drains
13. DISPOSAL
For larger quantities: Incinerate in an approved industrial incineration facility. Comply with all local and national regulations.
Small quantities can be flushed to sea or drain with large amounts of water. Preparation/substance is biodegradable.
14. TRANSPORT INFORMATION
The product is not regarded as dangerous goods according to ADR and IMDG.
15. REGULATORY INFORMATION
Classification
Irritating
COMPOSITION
N-methyl-2-pyrrolidone (10-30%), gamma-Butyrolacton (10-30%)
R-PHRASES
R-36/38 Irritating to eyes and skin.
S-PHRASES
S-37/39 Wear suitable gloves and eye/face protection. S-24/25 Avoid contact with skin and eyes S-26 In case of contact with
eyes, rinse immediately with plenty of water and seek medical advice.
16. OTHER INFORMATION
ISSUED: 2006-06-01
VENDOR NOTES
The safety data sheet has been prepared on the basis of information given by our suppliers and our present knowledge.
Information is based on our present knowledge and is therefore not a guarantee of specific properties.
Explanations to risk phrases in chapter 2.
R 22-36 Harmful if swallowed. Irritating to eyes.
R36/38 Irritating to eyes and skin.
Page 4 of 4
|