MAT E R I AL S AFE T Y DAT A S H E E T
1 . A r t i c le s a n d C o r p o r a t e I d e n t if i c a t i o n
GO EcoOne XG2 Cleaning Solution
P r o du ct Nam e
D e s c r ipt io n
Organic eco-solvent cleaning solution
Color: Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
M S D S C o d e : SL-ECOSCR-08
E f f e c t iv e D a t e : 2009-12-15
C o m pa n y G r a p h ic s O n e , L L C
3300 N San Fernando Blvd. Suite 101. Burbank, CA 91504
Addres s
+1-818-260-9591 +1-818-260-9589
TEL: FAX :
2 . C o m p o s it io n I n f o r m a t io n
I n g r e d ie n t s AMT . ( % ) CAS N o.
1) DIETHYLENE GLYCOL DIETHYL ETHER 65-75% 112-36-7
2) Gamma-BUTYROLACTONE 35-25% 96-48-0
3 . H a z a r d I d e n t if i c a t io n
E m e r g e n c y O v e r v ie w
Inflammable liquid and acute toxicity substance. Keep out of Children.
P o t e n t ia l H e a t h E f f e c t s
*When steam piles up, there is fear of ignition.
*There is a possibility of causing organic-solvent poisoning.
Don't absorb intentionally. In addition, the following condition may be presented in that case. *It
might start giddiness, headache, etc.
*There is a slight anesthesia action.
*Eyes, skin and a respiratory tract have a stimulus.
4 . F ir s t A i d M e a s u r e s
Immediately flush with large amounts of water for 15 minutes, hold eyelid
Eyes
apart to ensure irrigation. Get medical attention.
Wash skin thoroughly with soap and water. Remove contaminated clothing
S k in
and wash thoroughly before reuse. Consult a physician if irritation
continues.
Remove individual to fresh air. If not breathing, give artificial respiration. If
I n h a la t io n
breathing is difficult, give oxygen. Call a physician immediately.
Remain calm. Seek the attention of a physician.
I n g e s t io n
5 . F ir e F i g h t i n g M e a s u r e s
Combustible liquid under hazard communication standard. See
F la m m a b ilit y
Section 9 for Flash point.
Dry Chemical, carbon dioxide, or alcohol foam or dry sand.
E x t in g u is h in g M e d ia
Water should not be used; however, it should be used to keep
F ir e F ig h t in g I n s t r u c t io n
Fire-exposed containers and surfaces cool and prevent
explosive rupture. Wear full protective clothing, including
helmet, self-contained positive pressure or pressure-demand
breathing apparatus, bunker coat and pants, bands around
arms, waist and legs, facemask and protective covering for
exposed areas of the head.
6 . A c c id e n t a l R e le a s e M e a s u r e s
*Wear certain protections (gloves, mask, apron, goggles, etc).
*Outflow things are collected in the container, which can be sealed and are moved to safe
places, such as an outdoor open space.
*An adhesion thing waste, etc. should take a measure based on a related law
*The neighboring source of ignition, a high temperature object, and neighboring
combustibles are removed quickly.
*Prepare suitable fire extinguisher for the case of flashing.
*Collect inks using tools, such as products made from a plastic to avoid sparks.
*Absorb by nonflammable thing of dryness sand, the ground, and others.
For a lot of outflow, it encloses with the landfill to prevent outflow.
7 . P r e c a u t io n s f o r S a f e H a n d li n g a n d U s e
H a n d in g
It is dealt with in a well-ventilated place.
A container is sealed each time.
Use of fire, a spark, and a high temperature thing is forbidden on the outskirts.
For the measure against static electricity, equipment etc. is grounded and electric apparatus uses a
unit-explode type (safety type).
Tools of none sparks type are used.
Fabrics which are used for removal or wiping of inks etc. are soaked in water until they are
abrogated
Wear suitable protection implements (glove, protection mask, apron, goggles, etc.) for work.
Equip sufficient exhaust systems when working in the sealed place, and wear suitable protection
implements.
S tora ge
*Avoid direct rays of sunlight.
*Keep at the place with sufficient ventilation.
*Sore in the place of away from fire and a heat source, as well as oxidizing agents or explosives.
*Do not store in high or freezing temperatures.
8 . E x p o s u r e C o n t r o l a n d P e r s o n a l P r o t e c t io n
E n g in e e r in g C o n t r o ls
*A proper ventilator system must be equipped to prevent piling up steam.
*A machine, which uses this ink, must be taken ground.
*Near the handing place, it considers as equipments with which the thing used as high
temperature and the source of ignition is not placed.
Exposure Controls
*Handing equipments must be none-exposure type.
Personal Protection
*Eyes: Use protects goggle.
*Skin: The glove of the quality of the material with which the organic solvent or chemicals does
not permeate is worn.
9 . P h y s ic a l a n d c h e m ic a l P r o p e r t i e s
Appearance: Liquid C M Y K Lc Lm
Odor: slightly
Boiling Point: 165 癈 over
Steam Pressure: 500Pa(20 癈)
Density (water=1): 0.966
Others: No specified
1 0 . S t a b ili t y a n d R e a c t iv it y
Flash Point: 70.8 癈 (closed cup)
Auto flammability: None
Explosion lowers limit:0. 75%
Explosion upper limit: 10.8%
Dangerous substance with contact
*No information
Generation of detrimental gas by Combustion etc
*Detrimental gas, such as CO and a low numerator monomer, occurs.
Other reactivity information
*No dangerous reaction under standard conditions.
1 1 . T o x ic o lo g i c a l I n f o r m a t io n
*Based on toxicology data of chemically similar material.
Routes of overexposure: Eye Skin Inhalation and oral.
- Overexposure of eye surface to ink may be mildly irritating
- Overexposure of skin to ink contact may cause irritation and in some people swelling and redness -
Intentional inhalation overexposure to ink vapors may result in respiratory tract irritation and
anesthesia
- Intentional or accidental oral ingestion may cause an upset stomach
Chronic Health Hazards: None Known
Toxicity Data: Oral LD50 Dermal LD50 Inhalant LC50
>2500mg/kg (Rat)* >2000mg/kg(Rat)* No data available
The contents are created based on the data which can come to hand at present, information, and
date, since evaluation of danger and detrimental nature is not necessarily enough, be careful of
handling enough.
1 2 . E c o lo g i c a l I n f o r m a t io n
*Follow the appearance cautions, which do not affect environment in the cases, such as
abandonment, at the time of disclosure.
1 3 . D is p o s a l C o n s i d e r a t io n s
*For disposal of wastes, such as waste fluid and a container, observe local regulations.
*The drainage, which washed a container, machine equipment, etc. is passing as it is neither to the
ground nor a drain.
*For the waste generated by drainage processing, incineration, etc; observe local regulations. *In
carrying out incineration, processing of the waste etc., n order to generate detrimental gas, the
incinerator without cleaning equipment is not used.
*Disposal should be in accordance with local requirement.
14. Transport Information
Com m on
*General cautions of the clause of the cautions on handling and storage are followed.
L a n d t r a n s p o r t a t io n
*When it corresponds to Fire Service Law and labor security and hygiene law, the place
appointed abort transportation of a statute is followed.
M a r in e t r a n s p o r t a t io n
*The place set to Law for Safety of Vessels is followed.
A ir t r a n s p o r t a t io n
*The place set to the Aviation Act is followed.
15. Regulatory Information
Industrial Safety and Health Law: Flammable material
PRTR: Not corresponded
Fire Defense Law: Hazardous material 4th category, 2nd Petroleum oil (Non- aqueous)
UN Number: Not corresponded
EU Risk Phrase
R22/41
S25/26
16. Other information
This "Material Safety Data Sheet" contains health, safety, and environmental information. The
information contained herein is believed to be accurate at the time of preparation, but should only be
used as a guide. It does not replace any precautionary language or use and disposal information, which
accompanies the product. We make no warranty, expressed or implied with regard to such information.
We make no liability resulting from its use. Users should make their own investigations to determine
the suitability for their particular purposes. It is subject to revision from time to time due to revision of
laws and/or new knowledge.
|