SILVER PLUS REGULAR
INDUSTRIAL
METALLIC ANTI-SEIZE
PRODUCT CHARACTERISTICS
PRODUCT CHARACTERISTICS
DESCRIPTION
JET-LUBE鈥檚 SILVER PLUS REGULAR metallic anti-
JET-LUBE鈥檚 SILVER PLUS
-LUBE鈥? Thickener Aluminum Complex
seize is designed to provide a protective film against gall- Fluid Type Highly refined Petroleum
ing and seizure over a wide range of applications. The Appearance Silver, buttery gel
micro-sized particles produce a smooth creamy consis- Specific Gravity 1.15
tency and allows it to quickly and easily coat fine threaded Density (lb/gal) 9.6
fasteners, small diameter fasteners all the way to large Penetration (ASTM D-217) 310 - 350
INDUSTRIAL
diameter fasteners. Coefficient of Friction 0.08
Flash Point (ASTM D-92) >430掳F (221掳C)
SILVER PLUS REGULAR utilizes a water resistant,
SILVER PLUS Copper Strip Corrosion 1B
high temperature complex base grease as its carrier giv- Oil Separation, 100掳C, <5%
ing it superior 鈥渟tay put鈥? qualities. The complex thickener 24 hrs.
and highly refined base fluids allow for brushability down
to -20掳F (-29掳C) and up to 450掳F (232掳C). The petroleum
carrier, however, makes SILVER PLUS REGULAR
SILVER PLUS
unsuitable for oxygen service.
SILVER PLUS REGULAR contains micro-sized alu-
SILVER PLUS
minum and copper as well as other nonmetallic extreme
INDUSTRIAL
pressure and anti-wear particles. The metallic components
make it very conductive and since the primary anti-seize
particles is aluminum, it nearly eliminates the potential for
galvanic corrosion. It also makes it the anti-seize of choice
for components made of aluminum and its alloys. PACKAGING
CKAGING
Container Size Container
Code No.
路 Shiny Silver Color
陆 lb. Brush Top Can
69902
路 Service Rating: -200掳F (-129掳C) to 1800掳F (982掳C)
1 lb. Brush Top Can
69904
路 Brushable from -65掳F (-54掳C) to 400掳F (204掳C)
2 lb. Plug Top Can
69907
路 Resists galvanic corrosion
1 gal. Pail
69923
路 Permits reuse of fittings
路 Resists alkaline and acid vapors
INDUSTRIAL
APPLICATIONS
APPLICATIONS
LIMITED WARRANTY
SILVER PLUS REGULAR is excellent for use on bolts,
SILVER PLUS Jet-Lube, Inc. makes the Limited Express Warranty that at the date of
nuts, gaskets, pipe fittings, guides and slides, valve as- delivery, this product shall be free from defects in Jet-Lube, Inc. materials and
semblies, press fits, cylinder heads, chain drives, pump workmanship.
This Limited Express Warranty is expressly in lieu of any other express or
mountings, forging dies, manhole studs, exhaust manifold implied warranties, including any implied warranty of merchantability or fit-
studs, etc. ness for a particular purpose, and of any other obligation on the part of Jet-
Lube, Inc.
The sole remedy for breach of the Limited Express Warranty shall be the
refund of the purchase price. All other liability is negated and disclaimed, and
Jet-Lube, Inc. shall not be liable for incidental or consequential damages.
CORPORATE LOCATIONS
Houston, Texas鈥揥orld Headquarters
Maidenhead, England Edmonton, Canada
INDUSTRIAL
JET-LUBE, INC. WATS: 800-538-5823
4849 HOMESTEAD RD., PHONE: 713-674-7617
P.O. BOX 21258 (77226-1258) FAX: 713-678-4604
HOUSTON, TX 77028 E-MAIL: sales@jetlube.com
www.jetlube.com
JET-LUBE, INC.
MATERIAL SAFETY DATA SHEET
Manufacturer/Supplier: JET-LUBE, INC.
Product Name: SILVER PLUS REGULAR
Address: 4849 Homestead Rd., Ste. #200
Chemical Family: Petroleum based lubricating anti-seize
Houston, TX, 77028 USA Phone: 713-674-7617
Use: Anti-seize/anti-gall coating for threaded fasteners & sliding
I
Emergency Phone: 713-674-7617 Fax: 713-678-4604
applications
Chemtrec 24 hours (USA): 800-424-9300
Other Limits
Hazardous Components CAS No. Wt% OSHA PEL ACGIH TLV of Exposure
STEL: 10mg/M3
Petroleum Oil 64741964 60-100 Oil Mist N/A
TWA-5mg/M3
II
Nonhazardous Blend 1314132/13463677 10-30 UN UN UN
1317653/14807966
7782425/471341
1mg/M3 STEL: 2mg/M3
Metallic Powders 7429905 10-20 N/A
Main Hazards鈥揌ealth Effects
III
Eyes: May cause irritation. Inhalation: Viscous nature may block breathing passages if inhaled. Ingestion: May cause diarrhea.
Skin: For hypersensitive persons, may irritate the skin after prolonged periods of contact.
Eyes: Flush with water until all residual material is gone. If irritation persists, seek medical help. Inhalation: Clear air passage. If
IV
respiratory difficulty continues, seek medical help. Ingestion: Wash out mouth immediately. Consult physician. Skin: Wash thoroughly
with hand cleanser, followed by soap & water. Contaminated clothing should be dry cleaned before reuse.
Extinguishing Media: Foam, dry powder, Halon庐, carbon dioxide, sand, earth & water mist. Unsuitable Extinguishing Media: Water jet.
V
Protective Equipment for Fire fighting: Self-contained breathing apparatus.
Personal Precautions: Wear gloves & protective overalls. Environmental Precautions: Do not allow it to enter drains. Spillage: Scrape
VI
up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth.
VII
Handling: No special handling precautions necessary. Storage: Do not store at elevated temperatures.
Respiratory Protection: None needed. Hand Protection: Protective gloves for hypersensitive persons.
VIII
Eye Protection: Glasses, if applied to parts in motion. Body Protection: Overalls.
Physical State: Semi-solid gel Color: Silvery Odor: Petroleum pH: Neutral Boiling Range/Point 掳F (掳C): <600 (316)
Melting Point 掳F (掳C): 450 (232) Flash Point (COC) 掳F (掳C): 430 (221) Autoignition Temperature 掳F (掳C): >500 (260)
IX
Explosive Properties: LEL: 0.9% UEL: 7% Evaporation Rate (Butyl Acetate): <0.01 Partition Coefficient (Log Pow): N/A
Vapor Pressure (kPa): <0.01 V.O.C. Content: Nil Density (g/cm3): 1.13 Flammability: Not flammable at ambient temperature.
OAR Value: N/A Oxidizing Properties: None Water Solubility: Nil Vapor Density: >5
Stability: Chemically stable under normal conditions. No photoreactive agents. Conditions to Avoid: Powerful sources of ignition & extreme
X
temps. Materials to Avoid: Strong inorganic & organic acids, oxidizing agents. Hazardous Decomposition Products: Burning generates
smoke, airborne soot, hydrocarbons & oxides of carbon, sulfur & nitrogen. Residue mainly comprised of soot, metal & mineral oxides.
Acute Toxicity: Not known. Irritancy鈥揝kin: Very mild. Skin Sensitization: Not known. Subacute/Sub-chronic Toxicity: Not known.
Genotoxicity: None known. Chronic Toxicity: None known. California Prop 65: N/A Carcinogen: NTP: No IARC: No OSHA: No
XI
EC Class (67/548/EEC): No Allergens: None known. LC-50: 1.98 g/lt (mysidopsis bahia) based on assessment from related products. LD-50: N/A
Possible Effects: Potential to act as marine pollutant is highly unlikely.
XII
Behavior: Relatively well behaved. Bioaccumulation potential nil.
Environmental Fate: Highly unlikely to cause noteable contamination. Nontoxic to marine or land organisms.
Product Disposal: Do not incinerate. Contact waste disposal company or local authority for advice.
XIII
Container Disposal: Pails without liner鈥搒ee Product Disposal section above. Pails with plastic liner鈥損ail may only be disposed of via
standard waste disposal services, recycled or reused. Liner鈥搒ee Product Disposal section above.
XIV
Not classified as hazardous for transport. D.O.T.: Nonhazardous UN No.: Nonhazardous Air Transport (ICAO & IATA): Nonhazardous
Sea Transport (IMO & IMDG): Nonhazardous Road & Rail Transport (ADR/RID): Nonhazardous
Labeling Information: None needed EC Annex 1 Class: N/A R Phrases: R22-harmful it swallowed. S Phrases: N/A, as known.
Ozone Depleting Chemicals: N/A TSCA: All components are listed. WHMIS (Canada): Not controlled. SARA 311/312: None
XV
Canadian DSL: All components listed. 40 CFR Part 372 (SARA Section 313): N/A
CERCLA: Nonhazardous RCRA Hazard Class: Nonhazardous TSCA 12B Components: None
XVI
SDS data revised. New Jersey Right To Know: See Section II
SDS first issued.
HMIS SYMBOL
LEGEND
I. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY HEALTH 1
II. COMPOSITION INFORMATION ON INGREDIENTS
FLAMMABILITY 1
III. HAZARDS IDENTIFICATION
Signature: IV. FIRST AID MEASURES REACTIVITY 0
Prepared by: Donald A. Oldiges V. FIRE FIGHTING MEASURES
PPI B
VI. ACCIDENTAL RELEASE MEASURES
Date Issued: March 11, 2005 VII. HANDLING AND STORAGE
NFPA SYMBOL
VIII. EXPOSURE CONTROL/PERSONAL PROTECTION
As of issue date, the information contained herein is accurate IX. PHYSICAL AND CHEMICAL PROPERTIES FIRE
and reliable to the best of JET-LUBE鈥橲 knowledge. JET-LUBE庐 X. STABILITY AND REACTIVITY
does not warrant or guarantee its accuracy or reliability and XI. TOXICOLOGICAL INFORMATION 1
shall not be liable for any loss or damage arising out of the use XII. ECOLOGICAL INFORMATION
1 REACTIVITY
TOXICITY
0
thereof. It is the user鈥檚 responsibility to satisfy itself that the XIII. WASTE DISPOSAL
B
information offered for its consideration is suitable for its XIV. TRANSPORT INFORMATION
particular use. XV. REGULATORY INFORMATION
XVI. OTHER INFORMATION PERSONAL PROTECTION INDEX
|