MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT: M-Line 570-25R Solder November 17, 2005
Vishay Micro-Measurements MSDS # MGM061B
Post Office Box 27777
Raleigh, NC 27611
919-365-3800
CHEMTREC 1-800-424-9300 (U.S.)
703-527-3887 (Outside U.S.)
NOTE: CHEMTREC numbers to be used only in the event of chemical emergencies involving a spill, leak, fire,
exposure or accident involving chemicals.
SECTION 2: HAZARDOUS INGREDIENTS / IDENTITY INFORMATION
CAS NUMBER CHEMICAL IDENTITY %
7439-92-1 Lead 90-95
7440-31-5 Tin 4-6
7440-22-4 Silver 1-2
8050-09-7 Rosin 1-3
SECTION 3: HEALTH HAZARD DATA
Routes of Entry:
Inhalation: YES Skin: NO Ingestion: YES
Health Hazards (Acute and Chronic): Acute effects may include weakness, vomiting, loss of appetite,
convulsions, stupor and possible coma. Chronic effects may include weakness, insomnia, hypertension, slight
irritation of the eyes, headache, possible paralysis. Chronic over-exposure to lead may result in damage to blood
forming, nervous, urinary and reproductive systems.
DOCUMENT NO.: 14064 805-FRM011
M-Line 570-25R Solder MSDS # MGM061B
Carcinogenicity: NTP: No
IARC Monographs: See Note
OSHA Regulated: No
NOTE: Formaldehyde formed during the decomposition of rosin flux is listed as a suspected human carcinogen by
ACGIH. Lead is listed by IARC as 2B.
Signs and Symptoms of Exposure:
INHALATION: Dust, vapor, and fumes may be irritating to the respiratory system.
EYE CONTACT: Dust, vapor, and fumes may be irritating to the eyes.
SKIN CONTACT: Dust, vapor, and fumes may be irritating to the skin.
INGESTION: None listed.
Conditions Generally Aggravated by Exposure: Lead and its inorganic compounds are neurotoxins which may
produce neuropathy. Rosin is an allergen.
SECTION 4: EMERGENCY AND FIRST AID PROCEDURES
INHALATION: Remove victim from exposure. Get medical attention if experiencing effects of overexposure.
EYE CONTACT: Flush with copious amounts of water. Get medical attention.
SKIN CONTACT: Wash with soap and water.
INGESTION: Get immediate medical attention.
SECTION 5: FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/A
Flammable limits: LEL: N/A UEL: N/A
Extinguishing Media: Carbon dioxide, dry chemical, foam.
Special Firefighting Procedures: Use full body protective clothing and full face piece, self-contained breathing
apparatus operated in a positive pressure mode.
Unusual Fire and Explosion Hazards: Do not use water on fires when molten metal is present. High
temperatures may produce heavy metal fumes, dust and/or vapor.
2
DOCUMENT NO.: 14064 805-FRM011
M-Line 570-25R Solder MSDS # MGM061B
SECTION 6: ACCIDENTAL RELEASE MEASURES
Steps to be taken if material is released or spilled: Particulate matter should be stored in dry containers for later
disposal. Dust material should be vacuumed or wet-swept. Do not use compressed air or dry sweeping as a
means of cleaning.
SECTION 7: EXPOSURE CONTROLS -- PERSONAL PROTECTION
Respiratory Protection: Use NIOSH approved respirator if exposure exceeds PEL.
Ventilation: Use local exhaust to remove smoke from breathing zone.
Protective Gloves: Impervious gloves are recommended.
Eye Protection: Faceshield or safety glasses are recommended.
Other Protective Clothing or Equipment: Personal clothing and shoes should be protected from contamination.
Eyewash station should be available in the work area.
Work / Hygienic Practices: Do not eat, drink, or smoke in work areas. Wash hands thoroughly after using and
before eating, drinking, or smoking.
SECTION 8: HANDLING AND STORAGE
Precautions to be taken in handling and storing: Wash hands with soap and water after handling solder. Store
in dry area. Avoid skin contact. Avoid breathing smoke during soldering.
Other Precautions: None known.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: N/A
Vapor Pressure (mmHg): N/A
Vapor Density (Air = 1): N/A
Specific Gravity (H2O = 1): 11
Melting Point: 565掳F (296掳C)
Evaporation Rate (BuAc = 1): N/A
Volatile Organic Compounds: N/A
Solubility in Water: Insoluble
Appearance and Odor: Gray metal with neutral odor.
3
DOCUMENT NO.: 14064 805-FRM011
M-Line 570-25R Solder MSDS # MGM061B
SECTION 10: STABILITY AND REACTIVITY DATA
Stability: Stable.
Conditions to Avoid: None known.
Incompatibility (Materials to Avoid): Strong oxidizers.
Hazardous Decomposition or By-products: High temperatures may produce heavy metal fumes, dust and/or
vapors.
Hazardous Polymerization: Will not occur.
SECTION 11: TOXICOLOGICAL INFORMATION
Lead
OSHA PEL: 0.05 mg/m3
ACGIH TLV: 0.05 mg/m3
OTHER: Not established
Tin
OSHA PEL: 2.0 mg/m3
ACGIH TLV: 2.0 mg/m3
OTHER: Not established
Silver
OSHA PEL: 0.01 mg/m3
ACGIH TLV: 0.1 mg/m3
OTHER: Not established
Rosin
OSHA PEL: Not established
ACGIH TLV: Not established
OTHER: Not established
SECTION 12: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Disposal should be in accordance with local, state, and federal regulations.
4
DOCUMENT NO.: 14064 805-FRM011
M-Line 570-25R Solder MSDS # MGM061B
SECTION 13: TRANSPORTATION INFORMATION
SHIPPING NAME CLASS UN NUMBER
Not required -- Shipped as non-hazardous article.
SECTION 14: REGULATORY INFORMATION
SECTION 313 SUPPLIER NOTIFICATION:
This product contains a toxic chemical or chemicals (as listed below) subject to the reporting requirements of
Section 313 Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR Part 372.
CAS NUMBER CHEMICAL NAME % BY WEIGHT
7439-92-1 Lead 90 - 95
7440-22-4 Silver 1-2
TSCA NOTIFICATION:
All components of this product are listed in the Toxic Substance Control Act Chemical Substance Inventory (TSCA).
SECTION 15: OTHER INFORMATION
To the best of our knowledge, the information provided above meets the requirements of the United States
Occupational Safety and Health Act and regulations established under 29 CFR 1910.1200 (g)(2)(c)(1)-(4) for a
mixture of hazardous chemicals which has not been tested as a whole. The data provided on this Material Safety
Data Sheet is from manufacturers of the original components. Vishay Micro-Measurements specifically disclaims
any and all form of liability and/or responsibility for the application of this product.
5
DOCUMENT NO.: 14064 805-FRM011
|