MATERIAL SAFETY DATA SHEET
Fiberlock IAQTM 2500 (8325)
Section I - Product Identity:
Fiberlock Technologies, Inc. Date of Preparation: March 7, 2007
150 Dascomb Road Information Telephone Number: (978) 623-9987
Andover, MA 01810 Emergency Telephone Numbers:
978-623-9987 Weekdays: (978) 623-9987
978-475-6205 fax After hours, weekends & holidays: 鈥淐HEM-TEL鈥?
www.fiberlock.com Emergency Contact Number: (800) 255-3924
Section II - Hazardous Ingredients/Identity Information
HAZARDOUS CAS.
COMPONENT NO. Hazardous % TLV (units)
*This product does not have any chemicals at levels required to be reported under Section 313 of Title III of SARA.
Section III - Physical/Chemical Characteristics
212掳F
Boiling Point (掳F) 1.01
Specific Gravity (H2O=1)
Vapor Pressure (mm Hg) Melting Point Water (掳F)
N/A N/A
Vapor Density (AIR=1) Evaporation Rate
Heavier N/A N/A
Lighter
Appearance: Blue liquid pH: 11.7
Solubility in H2O Odor: Sweet odor
Complete Volatility/VOL: <97%
Section IV - Fire and Explosion Hazard Data
Flammable Limits: DOT Proper Shipping Name:
Flash Point: DOT ID#: Marking:
LEL: N/A UEL: N/A Compound Cleaning, Not Regulated
>200掳F Non Regulated None
Extinguishing Media: Use water spray, chemical foam, carbon dioxide, or dry chemical.
Special Fire Fighting Procedures: Use extinguishing media applicable to primary source of fire.
Unusual Fire Hazard: None
Section V - Health Hazard Data
Routes of entry: Ingestion Health Hazards: Irritation NTP: No
IARC Monographs: No OSHA Regulated: No TLV: Not established for this product- see Section
II for TLV of hazardous ingredients.
Over Exposure Effects:
Eye Contact: Burning and moderate to severe irritation. Skin Contact: No effects of exposure expected due to contact. Product may
cause irritation or dermatitis in some individuals upon prolonged contact. Inhalation: If misted, products may cause irritation of mucous
membranes of the nose, eyes or throat and couching or difficulty in breathing. Ingestion: May cause irritation to the mouth, nose and
throat. Possible nausea and discomfort.
First Aid: REFER TO EPA GUIDELINES ON LABEL FOR FIRST AID PROCEDURES!
Section VI - Reactivity Data
Chemical Stability: Stable
Conditions to avoid: Avoid handling conditions which may allow for leaks and spills of this material. Do not permit personnel to handle this
product without proper training and/or protective equipment.
Incompatible Materials: Avoid contact with acids.
Decomposition Products: From thermal reaction carbon dioxide and carbon monoxide.
Hazardous Polymerization: Will not occur.
Polymerization Avoid: Not applicable
Section VII - Spill or Leak Procedure
For Spill: Absorb with inert material and dispose of in accordance with applicable regulations.
Waste Disposal Method: Dispose of in accordance with local, state and federal regulations.
Section VIII - Special Protection
Respiratory Protection: Use a NIOSH/OSHA approved mask when spray mist is present and/or the TLV has been exceeded.
Ventilation: Recommended
Protective Gloves: Rubber gloves
Eye protection: Safety glasses
Shipping Class: Cleaning Compound
Other Protection: As needed
Section IX - Special Precautions
HMIS HAZARD RATING
Health 2 Flammability 0 Physical Hazard 0 Personal Protection B
HAZARD INDEX: 0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe
Handling & Storage:Keep out of reach from children. For industrial or institutional use only. Keep from freezing.
|