CYCLO庐 INDUSTRIES, INC
MATERIAL SAFETY DATA SHEET
This MSDS is being provided to your company for the purpose of providing current health and safety information to your
management and for your employees who work with this product. Please read the information on these sheets and then
provide this information to those people at your company whose responsibility it is to comply with FEDERAL, STATE and
COMMUNITY RIGHT TO KNOW regulations. Also, make this information available to any employee who requests it.
If Cyclo Industries, Inc. considers the formula of this product to be a trade secret, the exact chemical names of the ingredient(s)
and the percentages in which they are combined will not appear in the body of this sheet. The exact composition is available
upon request to physicians, industrial hygienists and other health professionals.
SECTION 1 鈥? PRODUCT & COMPANY IDENTIFICATION
No. 7庐 White Polishing Compound, Stock No. 07610
Product Name:
Product Use: A moderately strong abrasive cleaner for removing minor scratches and rough layers of weathered
surfaces from enamel paint & fiberglass finishes. It levels rough surfaces to restore smooth
reflections.
Manufactured by: Cyclo Industries, Inc., 401 Maplewood Drive, Suite 18, Jupiter, FL 33458
Telephone: (561) 775-9600
First Aid Emergency: (800) 752-7869 or (312) 906-6194
Shipping Emergency: (800) 424-9300 or (703) 527-3887 (CHEMTREC)
HMIS Code: Health = 1 Flammability = 1 Reactivity = 0
SECTION 2 鈥? COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
CAS Reg. No. Material Percentage Exposure Limits
8008-20-6 Hydrotreated light distillate 10 鈥? 20 Not applicable
SECTION 3 鈥? HAZARDS IDENTIFICATION
Effects of Overexposure:
Skin Contact: Irritation, defatting, redness
Eye Contact: Irritation, redness
Inhalation: None known
Ingestion: Nausea, vomiting, abdominal cramps
Health Hazards: None known
Carcinogenicity: NTP Carcinogen = No; IARC Monographs = No; OSHA Regulated = No
No. 7庐 White Polishing Compound, Stock #07610 MSDS - Page 2 of 4
SECTION 4 鈥? FIRST AID MEASURES
First Aid Procedures:
Ingestion: Give conscious subject water to dilute. Seek medical attention.
Skin Contact: Wash with soap and water and rinse thoroughly.
Inhalation: Remove subject to fresh air.
Eye Contact: Rinse with large amounts of water for 15 minutes. Seek medical attention.
SECTION 5 鈥? FIRE FIGHTING MEASURES
Flash Point: 165掳F (73.9掳C) Method Used: ASTM D-96 Tag Closed Cup
Flammable Limits in Air by Volume: Lower Explosion Limit (LEL) = N/A / Upper Explosion Limit (UEL) = N/A
Extinguishing Media: Compatible with all extinguishing media.
Special Fire Fighting Procedures: In confined areas use of self-contained breathing apparatus recommended. This
product doe not ignite readily. Intense heat may cause ignition.
Unusual Fire and Explosion Hazards: None known
SECTION 6 鈥? ACCIDENTAL RELEASE MEASURES
Spill/Leak Procedures: Dyke or pill area. Absorb free liquid with absorbent material. Wash area down thoroughly with
soap and water and rinse.
SECTION 7 鈥? HANDLING AND STORAGE
Handling & Storage Procedures: See product label for additional information. KEEP OUT OF THE REACH OF
CHILDREN.
SECTION 8 鈥? EXPOSURE CONTROLS / PERSONAL PROTECTION
Respiratory Protection: Use NIOSH approved in confined areas.
Ventilation: Good air circulation
Protective Clothing: Non-permeable household type gloves. Other clothing recommended as needed to minimize
prolonged skin contact.
Eye Protection: Safety glasses with splash guards are recommended.
Work/Hygienic Practices: Eye washes and safety showers in the workplace are recommended. Always wash hands and face
before consuming food or beverages.
No. 7庐 White Polishing Compound, Stock #07610 MSDS - Page 3 of 4
SECTION 9 鈥? PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: Not determined Specific Gravity (H2O=1): 1.13
Vapor Density (Air=1): >1 Solubility in Water: Complete
Evaporation Rate (Butyl Acetate = 1): <1 pH: 9.5
Appearance and Odor: Viscous white paste with a mild solvent odor.
Volatile Organic Compound (VOC): 15% / 1.4 lbs/gallon
SECTION 10 鈥? STABILITY AND REACTIVITY
Stability: Stable
Conditions to Avoid: Keep from freezing and below flashpoint.
Incompatibility (materials to avoid): Strong acids and oxidizers.
Hazardous Decomposition or Byproducts: CO and CO2
Hazardous Polymerization: Will not occur.
SECTION 11 鈥? TOXICOLOGICAL INFORMATION
Toxicological Data: Long-term toxicological studies have not been conducted for this product. See Section 3 of this
MSDS for acute symptoms of overexposure and carcinogenicity information.
SECTION 12 鈥? ECOLOGICAL INFORMATION
Aquatic/Terrestrial Toxicity Environmental Fate No data is available at this time.
SECTION 13 鈥? DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Before attempting clean up,
refer to other sections of this MSDS for hazard caution information.
SECTION 14 鈥? TRANSPORT INFORMATION
U.S. DOT
Shipping Description: Non-hazardous auto care product
ID Number: Not applicable
Hazard Class: Not applicable
No. 7庐 White Polishing Compound, Stock #07610 MSDS - Page 4 of 4
SECTION 14 鈥? TRANSPORT INFORMATION continued
U.S. DOT continued
Packing Group: Not applicable
Label: Not applicable
Placards: Not applicable
IMDG
Shipping Description: Non-hazardous auto care product
ID Number: Not applicable
Hazard Class: Not applicable
Packing Group: Not applicable
Label: Not applicable
Markings: Not applicable
Placards: Not applicable
SECTION 15 鈥? REGULATORY INFORMATION
TSCA Inventory: All components of this product are listed on the Toxic Substance Control Act (TSCA) Inventory of chemical
substances maintained by the U.S. Environmental Protection Agency.
SARA Extremely Hazardous Substances None
SARA Section 313 This product does not contain any toxic chemical(s) subject to the reporting requirements of Section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 (SARA 313 鈥?
Toxic Chemical Release Reporting)
CERCLA/Superfund (RQ): This product is not subject to CERC LA reporting requirements. Many states have more
stringent release reporting requirements. Report spills required under federal, state and local regulations.
California Proposition 65: This product does not contain chemicals known to the State of California to cause cancer, birth
defects and other reproductive harm.
SECTION 16 鈥? OTHER INFORMATION
Document Date: September 18, 2006 Supersedes: 2/29/2000
Revisions: Section 1 鈥? New corporate name & address; Section 2 鈥? component changes; Section 5 鈥? Flashpoint & firefighting
measures; Section 9 鈥? Specific gravity; Sections 11, 12, 14 & 15 added.
Cyclo Industries, Inc. provides the information contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. Individuals receiving this information must exercise their independent judgement in determining
its appropriateness for a particular purpose. Cyclo Industries, LLC makes no representations or warranties, either expressed or
implied, of merchantability, fitness for a particular purpose with respect to the information set forth herein or to the product to
which the information refers. Accordingly, Cyclo Industries, LLC will not be responsible for damages resulting from use of or
reliance upon this information.
|