MATERIAL SAFETY DATA SHEET
1
Page:
DATE PREPARED: 04/18/2007
MSDS No: ca90a02
CA-90 A02
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
1.
Product Identifier: CA-SO A02
Product Description: Epoxy Solder Mask Hardener ' '
Product Name: CA-SO A02
MANUFACTURER: 24 HR. EMERGENCY TELEPHONE
Taiyo America, Inc. NUIvEiERS:
2675 Antler Drive Emergency Contact: Phillip Harrison
Carson City, NV 89701 Emergency Phone 775-885-9959
COMPOSITION/INFORMATION ON INGREDIENTS
2.
CAS Registry #
wt.%
-
Diethylene Glycol Monoethyl Ether Acetate 17 - 18 112 -15-2
52 - 55
Epoxy
HAZARDS IDENTIFICATION
3.
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE:
Light cream colored viscous liquid
POTENTIAL HEALTH EFFECTS
EYES:
May cause irritation of the eyes
SKIN.
May m e skin irritation.
May cause skin sensitization, an allergic reaction, which becomes evident upon reexposure to this
material.
INGESTION:
This product may be slightly toxic. Swallowing may cause nervous system effects, based on
animal studies of one ingredient.
INHALATION:
May cause respiratory tract irritation.
High vapor concentrations may cause headaches, dizziness and nausea.
ACUTE EFFECTS:
Symptoms of overexposure (ingestion, inhalation, s k i contact) include: stomach or intestina
upset (vomiting, nausea, diarrhea), irritation of nose, throat and airways.
page: 2
DATE PREPARED: 04/18/2007
MSDS No: ca90a02
CA-90 A02
SUSCHRONIC/CHRONIC TOXICITY
CHRONIC:
Prolonged or repeated contact can result in drying of the skin which may result in skin irritation
and dermatitis (rash).
CARCINOGENICITY:
NTP, IARC and OSHA sources checked. Not listed.
FIRST AID MEASURES
4.
EYES:
Immediately flush eyes with plenty of water for 15 minutes. Get medical attention if imitation
persists.
SKIN:
Wash skin with soap and plenty of
INGESTION:
Do not induce vomiting. Give milk or water.
INHALATION:
If breathing becomes di%cult, remove to h h air.
If symptoms persist give oxygen and seek medicat attention.
FIRE FIGHTING MEASURES
5.
Flashpoint and Method: -165'F 74'C SETA Flash CC
FLAMMABLE CLASS:
OSHA: Combustible
DOT: Combustible
GENERAL HAZARD:
The Uniform Fire Code flammability rating for this product is: Class 111-A Combustible Liquid.
If burning, this material may produce hazardous fumes or hazardous decomposition products.
EXTINGUISHWG MEDIA:
Use carbon dioxide, foam, dry chemical or water spray when fighting fires involving this material.
HAZARDOUS COMBUSTION PRODUCTS:
Combustion products may be toxic. May produce various carbon oxides and hydrocarbons.
EXPLOSION HAZARDS:
Sealed containers may build up pressure and rupture when exposed to high heat (fire).
Page: 3
DATE PREPARED. 04/18/2007
MSDS No: ca90a02
CA-90 A02
FIRE FIGHTING PROCEDWS:
Remove sealed containers from the vicinity of the 6re.
U e normal 6re fighting procedures for burning liquids.
s
FIRE FIGHTING EQUIPMENT.
Use self-contained breathing apparatus with full facepiece operated in the positive pressure mode
with appropriate turn-out gear.
ACCIDENTAL RELEASE MEASURES
6.
SMALL SPILL:
the area with detergent and water.
Absorb the spilled material with in
ENVIRONMENTAL PRECAUTIONS:
WATER SPILL:
Contain, minimize diswsion and collect as soon as possible.
LAND SPILL:
Prevent from entering drain, sewer, stream or other bodies of water.
SPECIAL PROTECTIVE EQUIPMENT:
Protective eyewear, impervious gloves, air purifying respirator recommended.
HANDLING AND STORAGE
7.
HANDLING:
Avoid contact with skin, eyes and clothing. U e only with adequate ventilation.
s
STORAGE:
Store in a cool place in original container away from sunlight and heat.
Recommended storage below 68 F (20 C) to help maintain shelf lie.
EXPOSURE CONTROLS/PERSONAL PROTECTION
8.
ENGINEERING CONTROLS:
Good general mechanical ventilation recommended,
PERSONAL PROTECTION
EYES AND FACE:
Wear safety glasses with side shields, gogsles or face shield to prevent splashes into the eyes.
Page: 4
DATE PREPARED. 04/18/2007
MSDS No: ca90a02
CA-90 A02
SKIN:
In general avoid skin contact. Wear impervious gloves.
RESPIRATORY:
Not necessary for adequately ventilated work area.
PROTECTIVE CLOTHING:
As necessary to avoid contact with skin.
WORX HYGIENIC PRACTICES:
Wash hands with soap and water after using material. Do not use solvent to remove product
from skin.
PHYSICAL AND CHEMICAL PROPERTIES
3.
Physical State: Liquid
Odor: Organic solvent odor
Appearance: Cream colored viscous liquid
Percent Volatile: 17 - 19
Vapor Pressure: <2.00 mmHg
Vapor Density: -4.7-6.1 (Air = 1)
Solubility in Water: <20
Evaporation Rate: <0.1 (n-Butyl Acetate=l)
Specific Gravity: -1.2 (water=l)
(VOC): 208 to 218
COMMENTS:
Percent Volatile: Listed as percent weight.
VOC g/l is a calculated value based on component data.
STABILITY AND REACTIVITY
10.
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
STABILrn
This product is stable under normal operating conditions
CONDITIONS TO AVOID:
Avoid high temperatures and sunlight.
HAZARDOUS DECOMPOSITION:
Normal decompmition products.
5
Page:
DATE PREPARED: 04/18/2007
MSDS No: ca90a02
CA-90A02
INCOMPATIBLE MATERIALS:
O i i e s peroxides, strong acids and bases, amines and active epoxy curing agents.
xdzr,
11. TOXICOLOGICAL INFORMATION -r
GENERAL COMMENTS:
No specific toxicological data is available for this product.
ECOLOGICAL INFORMATI
12.
GENERAL COMMENTS.
No specific environmental data is available.
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD:
Dispose of in accordance with all Federal, State and Local regulations.
Keep out of sewers and waterways.
RCFiA/USPA WASTE INFORMATI
Waste material not RCRA regulate
TRANSPORT INFORMATION
14.
SPECIAL SHIPPING NOTES:
Not DOT regulated.
REGULATORY INFORMATION
15.
UNITED STATES
SARA TITLE 111 (SUPEWUND AMENDMENTS AND REAUTHOFtIZATION ACT)
313 Reportable Ingredients:
Diethylene Glycol Monoethyl Ether Acetate
(2-(2-ethoxyethoxy) ethyl acetate)
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA Status: This product complies with all applicable rules and orders under TSCA.
6
Page:
DATE PREPARED: 04/18/2007
MSDS No: ca90a02
CA-90 A02
RCRA STATUS:
Waste material is not RCRA regulated.
CANADA
CANADIAN ENVIRONMENTAL PROTECTION ACT:
All intentional components of this product are listed on the DSL or NDSL.
OTHER INFORMATION
16.
Approval date: 05/02/2007
REVISION SUMMARY
New MSDS
HMIS CODES
Reactivity: 2
Fie: 2 Health: 1
MANUFACTURER SUPPLEMENTAL NOTES:
This product contains no environmentally restricted substances as listed in Sony Technical Stan-
dard SS00259 fifth edition.
MANUFACTURER DISCLAIMER:
The information contained herein is based on data considered accurate. However, no warranty
is expressed or implied regarding the accuracy of the data or the results t o be obtained from th-
use thereof.
|