MATERIAL SAFETY DATA SHEET
1
Page
DATE PREPARED. 04/24/2007
MSDS No cdOaus207
CA-40 AUS2
CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
1.
Product IdentSer: CA-40 AUS2 ,. .. :,
.
Produd Description: Epoxy Solder Mask Hr ei&:&
ad;" ?
Product Name: CA-40 AUS2
24 HR. EMERGENCY TELEPHONE
MANUFACTURER:
Taiyo America, Inc. NUMBERS:
2675 Antler Drive ergency Contact: Phillip Harrison
Carson City, N 89701
V ergency Phone 775-885-9959
COMPOSITION/INFORMATION ON INGREDIENTS
2.
CAS Registry #
wt.%
-
Diethylene Glycol Monoethyl Ether Acetate 5-6 112 -152
Heavy Aromatic Naphtha (petroleum) 1-2 64742 -94-5
Dipropylene Glycol Monomethyl Ether 1-2 034590-94-8
Naphthalene <0.2 91-2C-3
Epoxy Resin 35 - 36
Acrylate Rgin 15 - 17
OSHA HAZARDOUS COMPONENTS 1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV Supplier
Dipropylene Glycol Monomethyl Ether 100 ppm 100 ppm
Skin
Naphthalene 10 PPm
COMMENTS:
Naphthalene is a component of Heavy Aromatic Naphtha Solvent (CAS# 6474294-5)
HAZARDS IDENTIFICATION
3.
EMERGENCY OVERMEW
PHYSICAL APPEARANCE:
Light cream colored viscous liquid
POTENTIAL HEALTH EFFECTS
EYES:
May cause mitation of the eyes
Page: 2
DATE PREPARED: 04/24/2007
MSDS No: cavlOaus207
CA-40 AUS2
sm
May cause skin irritation.
May cause sldn sensitization, an allergic reaction, which becomes evident upon reexposure to this
material.
INGESTION:
This product may be slightly toxic. Swallowing may cause nervous system effects, based on
a i a studies of one ingredient.
nml
JNIALATION:
May cause respiratory tract irritation.
High vapor concentrations may cause headaches, dizziness and nausea.
ACUTE EFFECTS:
Symptom of overexposure (ingestion, inhalation, skin contact) include: stomach or intestinal
upset (vomiting, nausea, diarrhea), irritation of nose, throat and airways.
SUBCHRONIC/CHRONIC TOXICITY
CHRONIC:
Prolonged or repeated contact can result in drying of the skin which may result in skin irritation
and dermatitis (rash).
CARCINOGENICITY:
Naphthalene
NTP - "Reasonably Anticipated to be a Human Caxcinogen"
IARC - "Possibly Carcinogenic to Humans" (Group 2B)
FIRST AID MEASURES
4.
EYES:
Immediately flush eyes with plenty of water for 15 minutes. Get medical attention if irritation
persists.
SKIN:
Wash skin with soap and plenty of water.
INGESTION:
Do not induce vomiting. Give milk or water.
INHALATION:
If breathing becomes difficnlt, re
If symptom persist give oxygen and see tion.
Page: 3
DATE PREPARED: 04/24/2007
MSDS No: ca40aus207
CA-40 AUS2
5. FIRE FIGHTING MEASURES
Flashpoint and Method: -172掳F 78掳C SETA Flash CC
FLAMMABLE CLASS:
OSHA: Combustible
DOT: Combustible
GENERAL HAZARD:
The Uniform Fire Code flammability rating for this product is: Class 111-A Combustible Liquid.
If burning, this material may produce hazardous fumes or hazardous decomposition products.
EXTINGUISHING MEDIA:
Use carbon dioxide, foam, dry chemical or water spray when fighting fires involving this material.
HAZARDOUS COMBUSTION PRODUCTS:
Combustion products may be toxic. May produce various carbon oxides and hydrocarbons.
EXPLOSION HAZARDS:
Sealed containem may build up pressure and rupture when exposed to high heat (fire).
FIRE FIGHTING PROCEDURES:
Remove sealed containers from the vicinity of the fire.
Use normal fire fighting procedures for burning liquids.
FIRE FIGHTING EQUIPMENT:
Use self-contained breathing apparatus with full facepiece operated in the positive pressure mode
with appropriate turn-out gear.
ACCIDENTAL RELEASE MEASURES
6.
SMALL SPILL:
Absorb the spilled material with inert material. Scrub the area with detergent and water.
ENVIRONMENTAL PRECAUTIONS:
WATER SPILL:
Contain, minimize dispersion and collect as soon as possible.
LAND SPILL:
Prevent from entering drain, sewer, stream or other bodies of water.
SPECIAL PROTECTIVE EQUIPMENT:
Protective eyewear, impervious gloves, air purifying respirator recommended.
Page: 4
DATE PREPARED: 04/24/2007
MSDS No: cdOaus207
CA-40 AUS2
HANDLING AND STORAGE
7.
HANDLING:
Avoid contact with skin, eyes and clothing. Use only with adequate ventilation
STORAGE:
Store in a cool place in original container away from sunlight and heat.
Recommended storage below 68 F (20 C) to help maintain shelf life.
EXPOSURE CONTROLS/PERSONAL PROTECTION
8.
ENGINEERING CONTROLS:
Good general mechanical ventilation
PERSONAL PROTECTION
EYES AND FACE:
Wear safety glasses with side shields, goggles or face shield to prevent splashes into the eyes.
SKIN:
I general avoid sldn contact. Wear impervious gloves.
n
RESPIRATORY:
Not necessary for adequately ventilated work area.
PROTECTIVE CLOTHING:
As necessary to avoid contad with skin.
W O W HYGIENIC PRACTICES:
Wash hands with soap and water after using material. Do not use solvent to remove producr
from skin.
PHYSICAL AND CHEMICAL PROPERTIES
9.
Physical State: Liquid
Odor: Organic solvent odor
Appearance: Cream colored viscous liquid
Percent Volatile: 9 - 10
Vapor Pressure: <2.00 mmHg
Vapor Density: -4.7-6.1 (Air = 1)
Solubility in Water: <5
Evaporation Rate: <0.1 (n-Butyl Acetate=l)
Specific Gravity: -1.6 (water=l)
(VOC): 140 to 145
5
page:
DATE PREPARED: 04/24/2007
MSDS No: caAOaus207
CA-40 AUS2
COMMENTS:
Percent Volatile: Listed as percent weight.
VOC g/l is a calculated value based on component data.
STABILITY AND REACTIVITY
10.
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
STABILITY:
This product is stable under normal operating conditions
CONDITIONS TO AVOID:
Avoid high temperatures and sunlight
HAZARDOUS DECOMPOSITION:
Normal decomposition products.
INCOMPATIBLE MATERIALS:
Oxidizers, peroxides, strong acids and bases, amines and active epoxy curing agents.
TOXICOLOGICAL INFORMATION
11.
GENERAL COMMENTS:
No specific toxicological data is available for this product.
ECOLOGICAL INFORMATION
12.
GENERAL COMMENTS:
No specific environmental data is available
DISPOSAL CONSIDERATIONS
13.
DISPOSAL METHOD:
Dispose of in accordance with al Federal, State and Local regulations.
l
Keep out of sewen and waterways.
RCRAJUSPA WASTE INFORMATION:
Waste material not RCRA regulated
Page: 6
DATE PREPARED: 04/24/2007
MSDS No: ca40aus207
CA-40 AUS2
14. TRANSPORT INFORMATION
SPECIAL SHIPPING NOTES:
Not DOT regulated.
REGULATORY INFORMATION
15.
U N I T E D STATES
SARA TITLE I11 (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
313 Reportable Ingredients: Diethylene Glycol Ethyl Ether Acetate, Naphthalene
TSCA (TOXIC SUBSTANCE CONTROL ACT)
TSCA Status: This product complies with all applicable rules and orders under TSCA.
RCRA STATUS:
Waste material is not RCRA regulated.
CANADA
CANADIAN ENVIRONMENTAL PROTECTION ACT:
AU intentional components of this product are listed on the DSL or NDSL.
OTHER INFORMATION
16.
Approval date: 05/01/2007
REVISION S U M W Y
New MSDS
HMIS CODES
Fie: 2 Health: 1 Reactivity: 2
MANUFACTURER SUPPLEMENTAL NOTES:
This product contains no environmentally restricted substance as listed in Sony Technical Stan-
dard SS-00259 fifth edition.
MANUFACTURER DISCLAIMER:
The information contained herein is based on data considered accurate. However, no warranty
is expressed or implied regarding the accuracy of the data or the results to be obtained from the
use thereof.
|