Material Safety Data Sheet
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: V-82 Commercial Adhesive
Chemical Name: Synthetic resin dispersion
Product Use/Class: Resilient flooring adhesive
Company Information: Mannington Mills, Inc.
P.O. Box 30, Rte. 45
75 Mannington Mills Road
Salem, New Jersey 08079
Phone: (856) 935-3000
Phone Numbers: Product Emergency: (866) 359-5602
Spill Response: (800) 424-9300
Effective Date: 23/June/2003 Reason for Revision: Updated MSDS format
Supercedes Date: Nov 2002
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS Number Weight% Exposure Guidelines
ACGIH - TLV OSHA - PEL Other
TWA STEL TWA Ceil
None per OSHA Standard 29 CFR 1910.1200 & SARA Title III, Section 313
SECTION 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Form: Off white colored past
Color: Off white
Odor: Slight odor
WARNING STATEMENTS
None
POTENTIAL HEALTH EFFECTS
Primary Routes of Exposure
Eye irritation only expected if solid material enters eye or if ventilation is poor.
Eye contact:
Irritation expected to be temporary.
May cause skin irritation if good hygiene practices are not followed. Repeated and/or
Skin contact:
prolonged contact may cause dermatitis.
Excess inhalation may cause adverse effects if proper ventilation is not assured. May
Inhalation:
cause slight upper respiratory tract irritation.
Ingestion: Can cause nausea, vomiting, griping, and diarrhea. Keep out of the reach of children.
Chronic: None known.
Copy of v82 commercial adhesive msds Page 1 of 4 Mannington MSDS
Other: Medical Conditions Aggravated by Exposure: Allergies, skin and respiratory
disorders. Product sensitivity.
Refer to Section 11 for toxicological information.
SECTION 4 - FIRST AID MEASURES
If in Eyes: Flush with water for 15 minutes. Seek medical attention if irritation persists.
If on Skin: Avoid contact. Wash thoroughly with warm, soapy water. Remove contaminated clothing.
If Inhaled: Remove to fresh air. Seek medical attention.
Do not induce vomiting. Seek medical attention. (Do not give anything by mouth to an
If Swallowed:
unconscious or convulsing person.)
SECTION 5 - FIRE FIGHTING MEASURES
Flash Point: >212 deg F
Lower Explosive Limit (LEL) %: Not available
Upper Explosive Limit (UEL) %: Not available
Auto-Ignition Temperature: Not available
OSHA Flammability Classification: Not available
Hazardous Products of Combustion: Not available
Water spray, carbon dioxide, dry chemical, or foam.
Extinguishing Media:
Unusual Fire and Explosion Hazards: None known
Fire Fighting Equipment: Wear standard fire fighting gear with self-contained breathing apparatus.
Miscellaneous Advice: Product will not burn until all water has evaporated.
See Section 10.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Personal precautions: Use appropriate protective equipment.
Contain with sand, earth, or other absorbent material to prevent from entering water or
Methods for clean-up:
sewage systems. Product is not a liquid so can be easily contained.
Refer to Section 13 for disposal information.
Refer to sections 14 & 15 for reportable quantity information.
SECTION 7 - HANDLING AND STORAGE
Handling:
Use only with adequate ventilation. Avoid prolonged skin contact.
Storage:
Keep containers tightly closed when not in use and during transport. While this adhesive is freeze/thaw stable, it is
recommended to protect it from freezing. Do not puncture. Store in a cool, dry place (50-90 deg F). Keep out of the
reach of children.
Consult the Mannington Professional Installation Guide for additional information on handling and storage.
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Use only in well ventilated areas. Local exhaust at point of use is preferable.
Engineering Controls:
Not normally required, assuming adequate ventilation provided. Use NIOSH
Respiratory Protection:
approved organic vapor/mist respirator if irritation occurs.
Copy of v82 commercial adhesive msds Page 2 of 4 Mannington MSDS
Eye Protection: Not normally required. Goggles if eye contact is probable.
Not normally required, unless prolonged contact is expected. May use chemical
Hand and Skin Protection:
resistant gloves.
Other Protective Equipment: None.
Wash hands before eating, smoking , or using toilet facilities. Do not smoke in any
Hygienic Practices:
chemical handling or storage area. Food or beverages should not be consumed
anywhere this product is handled or stored. Wash thoroughly after handling.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Off-white colored paste Water Solubility: Miscible (dispersible)
Physical State: Solid Volatiles (Wt %): Approx 75%
Boiling Point: Approx 212 deg F Vapor Pressure: Approx the same as water
Density: 11.8 lbs/gal Evaporation Rate: Same as water
Vapor Density: >1.4 (Air = 1.0)
SECTION 10 - STABILITY AND REACTIVITY
Conditions to avoid: Protect from freezing.
Materials to avoid: Strong oxidizing agents, strong acids, and strong bases.
Stability: Stable
Hazardous reactions: N.A.
Hazardous Polymerization: Will not occur
Carbon monoxide, carbon dioxide, oxides of nitrogen and other unidentified
Hazardous Decomposition Products:
organic compounds.
SECTION 11 - TOXICOLOGICAL INFORMATION
Product LD50 (Oral): None known
Product LD50 (Dermal): None known
Product LC50: None known
Immediate (Acute) Effects:
None known. Not a suspected carcinogen.
Delayed (Subchronic & Chronic) Effects
None known
SECTION 12 - ECOLOGICAL INFORMATION
None known.
SECTION 13 - DISPOSAL CONSIDERATIONS
US EPA RCRA Status: N.A.
Disposal Considerations: N.A.
Disposal Method: Allow to dry, then dispose of in a proper manner.
Disposal should be done in accordance with all local, state and federal (40 CFR Part
Miscellaneous:
261) regulations. Be aware that state and local requirements differ widely depending
on location and may in many cases be different from federal rules.
SECTION 14 - TRANSPORT INFORMATION
The information provided in this section is for information only. Please apply the appropriate regulations
to properly classify your shipment for transport.
Copy of v82 commercial adhesive msds Page 3 of 4 Mannington MSDS
DOT Proper Shipping Name: Not regulated.
DOT Hazard Class: Not regulated.
DOT UN/NA Number: Not regulated.
Packing Group: Not regulated.
Emergency Response Guide Number: Not regulated.
Other: Not regulated.
SECTION 15 - REGULATORY INFORMATION
U.S. Federal Regulations: Not available
SARA Section 313: Not available
Toxic Substances Control Act Not available
Inventory Status: Not available
Export Notification: Not available
Other: Not available
SECTION 16 - OTHER INFORMATION
Health Fire Reactivity Additional Information
Hazard Rating: 1 0 0
Legend:
N.A. - Not Available ppm - parts per million
S - Skin NIOSH - National Institute for Occupational Safety
C - Ceiling (Exposure Levels) ACGIH - American Conference of Government Industrial Hygienist
PEL - Permissible Exposure Limits TLV - Exposure limits developed by ACCIH
MSHA - Mine Safety and Health Adm TWA - Time Weighted Average
TSCA - Toxic Substances Control Act STEL - Short-Term Exposure Limit
CIH - Certified Industrial Hygienist HAZCOM - Hazard Communication Standard (29CFR1910.1200)
NFPA - National Fire Protection Association
OEL - Occupational Exposure Limit
OSHA- Occupational Safety and Health Administration
CERCLA - Comprehensive Environmental Response, Comprehensive and Liability Act
DISCLAIMER
Although the information and recommendations set forth herein (hereinafter "Information") are presented
in good faith and believed to be correct as of the date of hereof, the company makes no representations as to
the completeness or accuracy thereof. Information is supplied upon the condition that the persons
receiving same will make their own determination as to its suitability for their purposes prior to use. In
no event will the company be responsible for damages of any nature whatsoever resulting from the use of
or reliance upon Information. NO REPRESENTATIONS OR WARRANTIES, ETHER EXPRESS OR
IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER
NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO
WHICH INFORMATION REFERS.
End of MSDS
Copy of v82 commercial adhesive msds Page 4 of 4 Mannington MSDS
|