庐
J. J. MAUGET COMPANY In Case of Emergency, Call
5435 PECK ROAD (626) 444-1057
ARCADIA, CA. 91006-5847
STEMIX PLUS 庐
MATERIAL SAFETY DATA SHEET
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: STEMIX庐 Plus
REGISTRATION NUMBER: None required
GENERAL USE: Dilute liquid fertilizer for tree injection use
PRODUCT DESCRIPTION: Green liquid
MSDS No.: 101-2
CURRENT REVISION DATE: April 11, 2005
MANUFACTURER EMERGENCY TELEPHONE NUMBERS
J.J. Mauget Company MANUFACTURER: 800-873-3779
5435 Peck Road CHEMTRIC (24 hrs): 800-424-9300
Arcadia, California 91006-5847
Ph: 626-444-1057
Fax: 626-444-1057
SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS
COMPOSITION Wt.%
Solute1 4.12
Water 95.88
100.00
1Solute is a mixture of Diammmonium Phosphate (CASN 7783-28-0), Potassium Nitrate (CASN 7757-79-1)
and chelated micronutrients consisting of Iron EDTA, Calcium EDTA, Copper EDTA, Magnesium EDTA, Man-
ganese EDTA, and Zinc EDTA.
INGREDIENT Wt.%
Total Nitrogen (N) 1.21
0.71 Wt.% Ammoniacal Nitrogen
0.50 Wt.% Nitrate Nitrogen
Available Phosphate (P205) 0.92
Soluble Potash (K2O) 1.00
Calcium (Ca) 0.18
Copper (Cu) 0.08
Iron (Fe) 0.27
Magnesium (Mg) 0.09
Manganese (Mn) 0.08
Zinc (Zn) 0.29
Packaging: Micro-injector at 6 mL
SECTION 3 HAZARDS IDENTIFICATION
STEMIX PLUS庐 dilute aqueous fertilizer in a ready to use micro-injector is basically a non-hazardous prod-
uct.
SKIN CONTACT: No data available
EYE CONTACT: No data available
INGESTION: Not normal route of entry
INHALATION: Not normal route of entry
LONG TERM EFFCTS: No adverse effects known
SECTION 4 FIRST AID MEASURES
SKIN: Wash with soap and water
EYES: Wash with water for at least 15 minutes.
Seek medical attention if any irritation persists.
INGESTION: Wash mouth out with water. Drink additional water.
INHALATION: N.A.
SECTION 5 FIRE FIGHTING MEASURES
N.A.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Wash into soil or into drain.
SECTION 7 HANDLING AND STORAGE
Store micro-injectors in a cool, dry place. Do not expose micro-injectors to temperatures below 320 F (00 C).
Protect micro-injectors from excessive heat.
Keep out of the reach of children.
Do not re-use micro-injectors.
SECTION 8 EXPOSURE CONTROL / PERSONAL PROTECTION
VENTILATION PROTECTION: N.A.
RESPIRATORY PROTECTION: None required
PROTECTIVE CLOTHING: Long sleeve shirt, long pants and gloves recommended
EYE PROTECTION: Protective eyewear recommended
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point: 1 000 C
Density: 1.056
Flash Point: None
pH: Not listed
Appearance: Green liquid
Solubility, Water: Miscible
% Volatiles: N.A.
Reaction with Water: None
Vapor Pressure mm Hg: Same as water
Odor: No characteristic odor
SECTION 10 STABILITY AND REACTIVITY
Stability (Normal Conditions): stable
Incompatibility (Materials to Avoid): None known
Hazardous Decomposition Products: Not determined
Hazardous Polymerization: Will not occur
Conditions to Avoid: None known
SECTION 11 TOXICOLOGY INFORMATION
Acute Toxicology: Not determined
SECTION 12 ECLOGICAL INFORMATION
None listed
SECTION 13 DISPOSAL CONSIDERATIONS
Dispose of used micro-injectors in accordance with state and local regulations.
SECTION 14 TRANSPORT INFORMATION
Shipping Name: Not regulated
Hazard Class: None
Hazard Label: None required
SECTION 15 REGULATORY INFORMATION
FIFRA: Not regulated
SARA TITLE 111: None
CERCLA: None
WASHINGTON STATE, USA Meets metal standards
SECTION 16 OTHER INFORMATION
DEFINITIONS;
N.A.: Not Applicable
SARA TITLE 111: Superfund Amendments and Reauthorization Act
CERCLA: Comprehensive Response Compensation And Liability Act
The information and recommendations contained herein are based upon data believed to too be correct.
However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the informa-
tion contained herein.
|