MATERIAL SAFETY DATA SHEET                                 MSDS Number: 423265CB

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: CB BORID TURBO WITH BORIC ACID 16 OZ - EPA REGISTRATION #

               9444-150

Manufactured by: Waterbury Companies, Inc.

                  P.O. Box 640

                  Independence, LA 70443

                  24-Hour Emergency Contact:

                  800-424-9300 or 703-527-3887 (CHEMTREC)

2. COMPOSITION/INFORMATION ON INGREDIENTS

Hazardous components greater than 1.0% (0.1% if carcinogen or suspected carcinogen)

 Component                      CAS#         OSHA PEL ACGIH TLV Other Limits % by wt

 1,1-Diflouroethane             75-37-6      N.E.        N.E.          AEL (Dupont) 35-45

                                                                       1000ppm

 C8-C9 Isoparaffinic            64742-48-9 N.E.          N.E.          400ppm             35-45

 Hydrocarbons                                                          (Exxon)

 Non-hazardous components N/A                N/A         N/A           N/A                <5

 Orthoboric Acid (Boric Acid) 10043-35-3 N.E.            N.E.          N.E.               20

 Silicon Dioxide                7631-86-9 N.E.           N.E.          N.E.               <5

* This item is NOT a carcinogen, but has been listed to aid in the identification of all pesticide

active ingredients in the product. Actual percentages for these active ingredients have been

listed vs. percent ranges.

3. HAZARDS IDENTIFICATION

Warning! Flammable!

Contents under pressure, do not expose to fire or extreme heat.

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

Read label. Care should be taken to avoid depositing the product on exposed surfaces or

introducing the material in the air. Avoid contamination of food or food processing surfaces.

This powdery spray leaves a white residue. Should misapplication occur wipe off visible

residue.

Potential Health Effects:

Routes of Entry: Inhalation: Yes Ingestion: Yes           Skin: Yes

Health Hazards: Laboratory studies have shown that petroleum distillates, similar to the one

                 in this product, can produce effects in male rats. The significance of these

                 affects are unlikely, due to a number of human studies which produced

                 evidence of such effects at normal occupational levels. Inhalation of high

                 concentrations of Ethane, 1-1-Difluoro- vapors is harmful and may cause

                 heart irregularities, unconsciousness, or death. Intentional misuse or

                 deliberate inhalation may cause death without warning. Causes

                 substantial, but temporary eye injury.

Signs/symptoms Dizziness, headaches, drowsiness, incoordination, loss of consciousness,

of overexposure: eye irritation.



Revision Date: 7/9/02                  Date Printed: 11/1/02                           Page 1 of 4

MATERIAL SAFETY DATA SHEET                                 MSDS Number: 423265CB

Medical conditions             Skin contact may aggravate an existing dermatitis. Persons

aggravated by exposure:        with a pre-existing disease of the central nervous system or

                               cardiovascular system may have increased susceptibility to the

                               toxicity of excessive exposures.





NFPA Hazard Ratings Fire: 4 Health 1                 Reactivity: 1

NFPA 704 Ratings are subject to interpretation and are only intended for general identification

of the level of the specific hazard. All information must be considered for proper safe

handling of the material.

4. FIRST AID MEASURES

IF SWALLOWED: Call a physician or Poison Control Center immediately. Gastric lavage is

indicated if material was taken internally. DO NOT INDUCE VOMITING: Vomiting may cause

aspiration pneumonia hazard. IF ON SKIN: Remove contaminated clothing and wash affected

areas with soap and water. IF IN EYES: Flush eyes with plenty of water. Get medical

attention immediately. IF INHALED: Remove victim to fresh air. Apply artificial respiration if

indicated.

5. FIRE FIGHTING MEASURES

Extinguishing Media: CO2, dry chemical, or foam

Fire Fighting Procedures: Self contained air supply suggested. Keep containers cool to avoid

                          bursting.

Unusual Fire and Explosion Hazards: Exposure to temperatures above 130 deg.F may cause

                                      bursting.

6. ACCIDENTAL RELEASE MEASURES

If container is ruptured or begins to leak, place in a well-ventilated area free of sparks and

ignition sources. Pesticide that cannot be used according to label instructions must be

disposed of according to all applicable Local, State and Federal procedures.

7. HANDLING AND STORAGE

Do not contaminate water, food or feed by storage or disposal. Store in a cool, dry area away

from heat or open flame. Exposure to temperatures above 130 deg.F. may cause bursting.

Shake well before using. This insecticide is for use only with injection tube and for injecting

into cracks and crevices and void spaces where insects may be hiding, lying and breeding.

Application of this product in the food areas of food handling establishments other than as a

crack and crevice treatment is not permitted.

NFPA 30B Aerosol Classification: Level 1 Aerosol

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Protective Gloves: Not required - avoid contact with skin.

Eye Protection: Wear goggles or face shield.

Respiratory Protection: Not required - avoid breathing mist.

Ventilation: Local: As required to keep airborne concentrations below the acceptable levels.

             Mechanical: Provide adequate ventilation of area being treated.





Revision Date: 7/9/02                  Date Printed: 11/1/02                          Page 2 of 4

MATERIAL SAFETY DATA SHEET                                MSDS Number: 423265CB

Other protective equipment: None Known.

Protective Work/Hygiene Practices: Follow label instructions.

9. PHYSICAL AND CHEMICAL PROPERTIES

Specific Gravity (H2O=1): 0.98

Vapor Pressure (mm Hg): 3,286

Solubility: Insoluble

Appearance/Odor: Coarse spray leaving white powdery residue.

Flashpoint: Flammable per flame projection test.

LEL: N/A

UEL: N/A

Boiling Point: N/A

Melting Point: N/A

10. STABILITY AND REACTIVITY

Conditions to Avoid: Contact with open flames, very hot surfaces, acetic anhydride, and

                     elemental potassium.

Incompatible Materials: Acetic Anhydride and elemental potassium.

Hazardous Decomposition By-products Hydrofluoric acid, carbon dioxide, carbon monoxide,

                                        and possibly carbonyl fluoride.

Hazardous Polymerization Conditions: None known.

11. TOXICOLOGICAL INFORMATION

This product contains no chemicals that are listed on the NTP, IARC, or OSHA carcinogen

lists. Any further information on the toxicology of the material can be obtained by contacting

the manufacturer.

12. ECOLOGICAL INFORMATION

Please call the manufacturer for questions concerning the ecological effects of this product

and it's constituents.

13. DISPOSAL CONSIDERATIONS

Do not reuse empty container. This container may be recycled in the few but growing number

of communities where (steel) aerosol can recycling is available. Before offering for recycling,

empty the can by using the product according to the label. (DO NOT PUNCTURE!) Any

remaining or collected liquid from punctured cans should be disposed of in a safe manner at

an approved facility in accordance with Local, State, and Federal regulations. "Empty" cans

may contain residue. Avoid exposure to heat, flame, sparks, and other sources of ignition.

14. TRANSPORT INFORMATION

                                                                                     Pkng Grp

            Status        Shipping Name                           Class ID #

DOT (USA):  Regulated     Consumer Commodity (per                 ORM-D N/A          N/A

                          49CFR173.306)

IATA (Air):      Regulated         Consumer Commodity             9        ID8000    N/A

IMDG (Vessel): Regulated           Aerosols                       2        UN1950 N/A

National Motor Freight Classification and LTL Class: 102120-Class 60

Revision Date: 7/9/02                 Date Printed: 11/1/02                         Page 3 of 4

MATERIAL SAFETY DATA SHEET                                  MSDS Number: 423265CB

15. REGULATORY INFORMATION

SARA Title III Section 312: For completing Tier II reports, the following information should be used

Note: See state and local regulations for specifics on reporting requirements for your facility.

This product should be described as:       PURE: N           MIXTURE Y             SOLID: Y

                                           LIQUID: Y         GAS: Y

       Physical Hazards: FIRE: Y           PRESSURE: Y            REACTIVITY: N

       Health Hazards:     IMMEDIATE: Y               DELAYED: N

16. OTHER INFORMATION

Product Sales Information: 800-845-3495

MSDS Information: 985-878-6751

Revision Notes: Annual MSDS review.

N/A = Not Applicable     N.E. = Not Established                     MSDS Prepared by D.D.

This Information is provided in good faith, but no warranty, expressed or implied, is made.

The manufacturer believes that it is accurate and to the best of its knowledge, and relates

only to the specific material designated herein.









Revision Date: 7/9/02                   Date Printed: 11/1/02                          Page 4 of 4