MILITEC-1 MSDS
MILITEC-
Material Safety Data Sheet
IDENTITY (As Used on Label and List) Note: Blank spaces are not permitted. If any item is
not applicable, or no information is available, the
space must be marked to indicate that.
MILITEC-1庐
Section I
Manufacturer's Name Emergency Telephone Number
MILITEC INCORPORATED (301) 893-3910
Address (Number, Street, City, State, and Zip Code) Telephone Number for Fax Number
11828 Pika Drive Information
Waldorf, MD 20602 (301) 893-3910 (301) 893-8354
U.S. National Stock Numbers (NSN)
9150-01-415-9111 (1/2 oz. bottles, Box of 200); 9150-01-415-9112 (1 oz. bottles, Box of
100); 9150-01-415-9114 (4 oz. bottles, Box of 12); 9150-01-378-3058 (8 oz. bottles, Box
of 12); 9150-01-378-3118 (16 oz. bottles, Box of 12)
Date Revised Signature of Preparer (optional)
24 February 2005
Section II - Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical OSHA ACGIH Other Limits %
Identity; Common Name(s)) PEL TLV Recommended (optional)
The materials in this product are not known to be carcinogenic or contain grater than 0.1
% carcinogenic compounds that would require reporting under the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
TSCA inventory status: All components registered.
U.S. OSHA Hazard Communication Standard: Product assessed in accordance with
OSHA CFR 1910.1200 and determined not to be hazardous.
1
Section III Physical/Chemical Characteristics
Boiling Point (掳C & 掳F) Fire Point COC (D92) Pour Point (D97)
455掳F -45掳F
275掳C 528掳F
Specific Gravity (H2O=1)/25掳C Kinematic Viscosity (D445) Neutralization Number by
Potentiometric Titration (D664)
1.142 100掳F, CST 43.41
Total Acid Number 0.25
210掳F, CST 5.80
Evaporation Rate (Butyl Melting Point Autoignition Temp (D2155)
Acetate=1) ASTM D97 Pour Point -45掳F 715掳F
Negligible Loss @ 70掳F
Cloud Point (D2500) Solubility In Water Vapor Density (AIR=1)
-25掳F <1% No Vapor Generated at 70掳F
Appearance and Odor
Color (D1500) 2.5 clear amber color. Mild odor.
Section IV - Fire and Explosion Hazard Data
Flash Point (Method Used) Flammable Limits LEL UEL
Cleveland Open Cup (D92) 410掳F NA NA NA
Extinguishing Media
Carbon Dioxide, Foam, Dry Chemicals, Water Fog
Special Fire Fighting Procedures
Use Standard Precautions for Oil Fire
Unusual Fire and Explosion Hazards
None
Section V - Reactivity Data
Stability Unstable Conditions to Avoid
None Known
Stable X
Incompatibility (Materials to Avoid)
Strong Oxidizing Reducing Agents
Hazardous Decomposition or Byproducts
When burning, may form carbon monoxide (Typical or organic lubricants) and hydrogen
chloride
Hazardous Polymerization May Occur Conditions to Avoid
None Known
Will not Occur X
2
Section VI - Health Hazard Data
Primary Unlikely Unlikely
Route(s) of Entry Inhalation? Skin? Ingestion?
Absorption: Contact is not likely to result in absorption of harmful amounts.
Health Hazards (Acute and Chronic)
Typical of that for Hydrocarbon lubricants. Inhalation: Permissible exposure limit 5
mg/m3 (Oil Mist)
Eyes: Can cause some transient irritation and burning sensation.
Not listed Not listed No
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
Materials in this product not known to be carcinogenic/no ingredient citations.
Signs and Symptoms of Exposure
Inhalation: Mist can cause some transient irritation to upper respiratory tract.
Eyes: Can cause some transient irritation and burning sensation; Irritation (Redness).
Medical Conditions Generally Aggravated by Exposure
Skin Contact: Prolonged and repeated immersion can cause some transient irritation,
burning sensation, defatting and dermatitis in some people.
Emergency and First Aid Procedures
Eyes: Wash eyes immediately for 15 min., Consult physician if irritation persists.
Skin: Wash with water after contact. If irritation persists, consult a physician.
HMIS
Hazardous Materials Identification System
Health: 1 Flammability: 0 Reactivity: 0 PPE: B
Section VII - Precautions for Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled
Contain Liquids and control discharges to streams or sewer systems under conditions
acceptable to appropriate local, state, and federal regulatory agencies. Apply absorbent
material (i.e., sawdust) and sweep up and place waste in a suitable and properly labeled
container for disposal.
Waste Disposal Method
Disposal must meet all federal, state, and local regulations. Dispose in accordance to
regulations appropriate for waste oil. For any questions, contact the specific regulatory
agency.
Precautions to be taken in handling and storing
Typical for other Hydrocarbon lubricants, keep away from open flame. Keep out of reach
of children. Keep container closed when not in use. Store in original container.
Other Precautions
Keep off foodstuffs, avoid eye contact. Avoid repeated and/or prolonged skin contact.
Wash thoroughly after handling. Avoid breathing oil mist.
3
Section VIII - Control Measures
Respiratory Protection (Specify Type)
None under normal conditions. In emergencies or upsets use NIOSH approved mist
respirator. Revise engineering controls to assure adequate ventilation.
Ventilation Local Exhaust Special
None required in ventilated areas Same
Mechanical (General) Other
None required in ventilated areas Same
Protective Gloves Eye Protection
Rubber gloves, if desired Safety Glasses
Other Protective Clothing or Equipment
No special equipment required. However, good personal hygiene practices should always
be followed.
Work Hygienic Practices
Avoid Eye contact and prolonged skin contact. Avoid breathing oil mist, wash thoroughly
after handling.
4
|