SECTION I ?COMPOSITION / INFORMATION ON INGREDIENTS
This Material Safety Data Sheet is prepared to comply with the United States Occupational Safety and Health Administration (OSHA)
Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Workplace Hazardous Materials Information System
(WHMIS). Unlisted ingredients are not " hazardous" per the OSHA standard and /or are not found on the WHMIS ingredient
disclosure list.
Hazardous ingredients : Phosphoric Acid 85%
Approx. concentration. (%) : 5% -20%
#CAS ?NA or UN : 7664 ?38-2
DL 50 (specific type and way) : 3,500 mg/kg FLAMMABILITY : <0>
Limit of exposition : none REACTIVITY : <0>
HEALTH : <1>
SECTION II- PHYSICAL CHARACTERISTICS
Physical state : ( ) GAS (x ) LIQUID ( ) SOLID
Odor and appearance : Clear / light amine odor
Threshold odor : N/A
Density : 1.14
Vapor pressure (mm Hg) : 14mm hg/68癋
Vapor density (air = 1) : N/A
Evaporation rate : Same as water
Boiling point : 300癋
Freezing point (癋) : 30?F
Solubility in water (70癋) : Complete
pH :1
Volatile organic compounds (VOC) contents: no VOC contents
SECTION III ?FIRE AND EXPLOSION HAZARD DATES
Inflammability : ( ) yes ( x ) no
If yes, in which conditions?
Extinguishing media : water - foam - powder, dry chemical.
Special method : none
Flash point / method : none close cup and open cup
Flammability limits in air (% per volume) : inferior: N/A
: superior: N/A
Temperature auto ignition(癋) : N/A
Class of flammability THD : N/A
Unusual fire and explosion hazard : none
Explosion data : none
Sensibility of chemical impact : none
Combustion rate : N/A
Sensibility of electrostatic discharge : N/A
SECTION IV- TRANSPORTATION INFORMATION
Ground transportation: Class 55
Not regulate
PAGE 1 of 2
SECTION V ?REACTIVITY DATA
Chemical stability : ( x ) yes ( ) no
If yes, in which conditions? : if store at the recommended temperature
Incompatibility ( Materials to avoid): Avoid contact with strong Alkaline bases because high heat of reaction can generate steam.
Hazardous Decomposition Materials: None
Hazardous Polymerization: None
Conditions to Avoid for Polymerization: None described
Stability Considerations: Stable
Conditions to Avoid for Stability: None
SECTION VI ?POTENTIAL HEALTH EFFECTS
Eyes: Eye contact with liquid product may cause irritation.
Skin: Prolonged or repeated contact with liquid product may cause light irritation.
Inhalation: Exposure to vapors in poorly ventilated areas may cause light irritation of the nose.
Ingestion: Not an anticipated route of exposure. Small amounts are not anticipated to be harmful.
SECTION VII ?SPECIAL PRECAUTIONS
Precautions to be taken in handling and storing: Store drums away from excessive heat.
SECTION VIII ?TOXICITY DATA
Chronic effects of exposure to the product : none
Irritations : none
Exposition limit : see section II
CL50 of product : N/A
Sensibility : N/A
Synergic Material
- Carcinogenicity effects : none
- Harmful effects of reproduction : none
- Teratogenes effects : none
- Mutageny effects : none
SECTION IX - FIRST AID MEASURES
Skin: wash with water for a few minutes
Eyes: rinse with water for a few minutes, if irritation persist consult a physician.
Ingestion: drink one or two glasses of water or milk. Do not induce vomiting, consult a physician if stomach ache persist.
General recommendation: none
SECTION X ?SPILL OR LEAK PROCEDURES
Small Spills: Spill and lead disposal procedure. Rinse with water
Large Spills: Should be absorbed by dirt or other absorbents for disposal. Must conform to Federal, State and Municipal regulations.
SECTION XI - PERSONAL PROTECTION
Protection equipment:
- gloves : rubber gloves
- respiration protection : none
- eyes protection : goggle
- shoes : normal
- clothing : normal
- control mechanic device : none