Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Trade Name: Airshield Polish Sealant
Manufacture: Nail Systems International Version Number: 2
2 Union Hill Road MSDS Number: 5500
W. Conshohocken, PA 19428 Product Code: Top Coat
Telephone Number: 610-825-1524 800-354-6741 www.nsinails.com
Fax Number: 610-825-2738
TELEPHONE NUMBERS ?24 HOUR EMERGENCY ASSISTANCE:
Infotrac Domestic - 800-535-5053
Infotrac International - 352-323-3500
2. COMPOSITIONAL INFORMATION
Ingredient Name CAS Number Concentration Exposure Limits / Health Hazards
2-Butanone 78-93-3 OSHA VPEL 200 ppm TWA
ACGIH TLV 200 ppm TWA
Nitrocellulose 9004-70-0 OSHA VPEL Not Established
ACGIH TLV Not Established
N-Propyl Acetate 109-60-4 OSHA VPEL 200 ppm TWA
ACGIH TLV 200 ppm TWA
N-Butyl Acetate 123-86-4 OSHA VPEL 150 ppm TWA
ACGIH TLV 150 ppm TWA
Ethanol 64-17-5 OSHA VPEL 1000 ppm TWA
ACGIH TLV 1000 ppm TWA
Proprietary Monomer Trade Secret OSHA VPEL Not Established
ACGIH TLV Not Established
2-Propanol 67-63-0 OSHA VPEL 400 ppm TWA
ACGIH TLV 400 ppm TWA
2-Hydroxy-4-n-octoxybenzophenone 1843-05-6 OSHA VPEL Not Established
ACGIH TLV Not Established
3. FIRE AND EXPLOSION HAZARD INFORMATION
Extinguishing Media
Use a water spray, dry chemical, alcohol foam or carbon dioxide to extinguish fire.
Basic Fire Fighting Procedures
Evacuate area and fight fire from a safe distance. Water may be ineffective. Water may be used to keep fire-exposed containers cool until
fire is out Wear self-contained breathing apparatus and full protective clothing.
NFPA Rating Health ?2 Flammability ?3 Reactivity - 2
23o F o
Flash Point: C
o
Auto Ignition Temperature: 759 C
Flammability Limits in Air, Lower % by Volume: 2
Flammability Limits in Air, Upper % by Volume: 11.5
ND = No Data NA = Not Applicable Printed On: 2/8/2001
Revised On: 1/9/2001
MSDS Number: 5500 Trade Name: Airshield Polish Sealant Page Number 1
Material Safety Data Sheet
4. HEALTH HAZARD INFORMATION
Potential Health Effects, Skin SLIGHTLY IRRITATING
May cause mild skin irritation. May cause an allergic reaction in some individuals.
Potential Health Effects, Eye MODERATELY IRRITATING
May cause eye irritation. This information is based on findings from related or similar materials.
Potential Health Effects, Inhalation SLIGHTLY IRRITATING
The following evaluation is based on a component(s) of this material.
Practically Non-Toxic. Under normal conditions, inhalation is not expected to be a problem. However, respiratory tract irritation may
occur if exposed to fumes or mist. Breathing of the mists, vapors or fumes may be irritating to the nose, throat and lungs.
5. FIRST AID INFORMATION
Skin SLIGHTLY IRRITATING
Remove contaminated clothing and launder before reuse. Wash affected skin areas with soap and water. See a physician if irritation
persists.
Eye MODERATELY IRRITATING
If symptoms develop, move individual away from exposure and into fresh air. Flush eyes gently with water while holding the eyelids
apart. GET IMMEDIATE MEDICAL ATTENTION
Inhalation SLIGHTLY IRRITATING
Move subject to fresh air. If having difficulty breathing, administer oxygen. Give artificial respiration if breathing has stopped. Call a
physician.
Ingestion
Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual on the left side with head
down. Contact a physician, medical facility, or poison control center for advise about whether to induce vomiting. If possible, do not
leave individual unattended.
6. REACTIVIY INFORMATION
Stability / Incompatibility
Stable. Incompatible with strong oxidizing agents.
Hazardous Reactions / Decomposition Products
May form carbon dioxide and carbon monoxide.
Hazardous Polymerization
Will not occur.
7. SPILL OR LEAK PROCEDURES INFORMATION
Emergency Action
Eliminate and/or shut off any ignition source and keep ignition sources out of the area. Evacuate the area of all unnecessary personnel.
Thoroughly ventilate the area, use self-contained breathing apparatus. Wear protective equipment if exposure conditions warrant.
Spill or Leak Procedure
Eliminate and/or shut off any ignition source and keep ignition sources out of the area. Shut off leak if safe to do so. Absorb spill with
inert material (e.g. dry sand or earth) then place in a chemical waste container. Use water spray to dilute spill to a nonflammable mixture.
Avoid runoff into storm sewers and ditches, which lead to waterways.
ND = No Data NA = Not Applicable Printed On: 2/8/2001
Revised On: 1/9/2001
MSDS Number: 5500 Trade Name: Airshield Polish Sealant Page Number 2
Material Safety Data Sheet
8. SPECIAL PROTECTION INFORMATION
Skin Protection: Personal Protection Equipments (PPE)
If skin contact is anticipated, protective clothing, including gloves, should be worn.
Eye Protection: Personal Protection Equipments (PPE)
Wear chemical safety goggles
Have eye-washing facilities readily available where eye contact can occur.
Respiratory Protection: Personal Protection Equipments (PPE)
Good general ventilation should be sufficient to control airborne levels.
9. STORAGE AND HANDLING EQUIPMENT
Handling
Wash hands thoroughly before eating, drinking or smoking. Store below 120 degrees F in a tightly closed container in a cool, dry,
isolated, well ventilated area, away from heat, ignition sources and incompatibles. Store out of direct sunlight. Use non-sparking tools.
Storage
Store in tightly closed containers in a cool, dry, isolated, well ventilated area away from heat, source of ignition and incompatibles.
10. MISCELLANOUS INFORMATION
Disclaimer
The above information is based on the data of which we are aware and is believed to be correct as the data hereof. Since this information
may be applied under conditions beyond our control and which may be unfamiliar and since data made available subsequent to the data
hereof may suggest modification of the information, we do not assume any responsibility for the results of its use. This information is
furnished upon condition that the person receiving it shall make his or her own determination of the suitability of the material for his /her
particular purpose.
Completed On: 01-09-01
Completed By: Kirby Slack
Replaces Sheet Dated: 06-24-98
ND = No Data NA = Not Applicable Printed On: 2/8/2001
Revised On: 1/9/2001
MSDS Number: 5500 Trade Name: Airshield Polish Sealant Page Number 3
|