MATERIAL SAFETY DATA SHEET





FORMULA ONE MAX DEVELOPER

& REPLENISHER

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION



Manufacturer: Photo Systems, Inc.      Product Name: FORMULA ONE MAX DEVELOPER

Product Number: 728010, 728290, 728322              Date Prepared: 08/28/2007

Customer Information Phone Number:                  1-800-521-4042

CHEMTREC? 24 Hour Emergency Transport Phone Number: 1-800-424-9300



2. COMPOSITION/INFORMATION ON INGREDIENTS



Chemical Name               CAS             OHSA PEL            ACGIH TLV               Weight %

SODIUM SULFITE              7681-57-4       N.E.                N.E.                    10-15

METHANOL                    67-56-1         260 mg/m?          262 mg/m?(skin)        3-5

HYDROQUINONE                123-31-9        2mg/m?             2mg/m?                 1-3

TRISODIUM HEDTA             MIXTURE         N.E.                N.E.                    <1



3. HAZARDOUS IDENTIFICATION



POTENTIAL HEALTH EFFECTS



Eye Contact: May cause severe irritation.

Inhalation: Low hazard for recommended handling. In contact with strong acids or if heated may

   liberate sulfur dioxide gas which is irritating. Some asthmatics or hypersensitive individuals may

   experience difficult breathing.

Ingestion: Harmful if swallowed. May cause irritation or corrosion to the gastrointestinal tract. Some

   asthmatics and sulfite-sensitive individuals may experience wheezing, chest tightness, stomach

   upset, hives, diarrhea.

Skin Contact: May cause allergic skin reaction. Skin inflammation can include itching, scaling,

   reddening. May be harmful if absorbed through the skin.

Signs And Symptoms Of Exposure: Eye irritation, respiratory irritation, dermatitis, difficulty

   breathing, abdominal pain, skin irritation, mucus membrane irritation, coughing, nausea,

   diarrhea.



4. FIRST AID MEASURES



Eye Contact: Immediately flush eyes with water for at least 15 minutes. Get immediate medical

   attention.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult,

   give oxygen. Get medical attention immediately.

Ingestion: If swallowed, give victim a glass of water or milk. Call a physician or poison control

   center immediately. Never give anything by mouth to an unconscious person.

Skin Contact: Flush skin with plenty of water and wash with a non-alkaline skin cleaner. Wash

   contaminated clothes before reuse. Get medical attention if irritation develops.

Aggravated Medical Conditions: Allergies, chronic asthma, and individuals with sulfur sensitivities

   may experience chest tightness and other symptoms that can be exacerbated by fumes from

   this product.

Supplemental Health Information: None of the components in this product is listed by IARC, NTP,

Date: 9/27/07                      Formula One Max Developer                                    1/4

MATERIAL SAFETY DATA SHEET



   or OSHA as carcinogen.



5. FIRE FIGHTING MEASURES



FLAMMABLE PROPERTIES



Flash Point: Not flammable Flash Point Method: Not applicable Auto ignition: Not applicable

LEL: Not applicable             UEL: Not applicable

Extinguishing Media: For concentrate: Use agent appropriate for surrounding fire. For working

   solution: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this

   material.

Special Fire-Fighting Procedures: Firefighters should wear proper protective equipment and self-

   contained breathing apparatus with full face piece in positive pressure mode. Move containers

   from fire area if it can be done without risk. Use water to keep fire-exposed containers cool.

Unusual Fire And Explosion Hazards: Fire or excessive heat may cause production of hazardous

   Decomposition products.

Combustion Products: Oxides of carbon and sulfur.



6. ACCIDENTAL RELEASE MEASURES



Steps To Be Taken In Case Material Is Spilled Or Released: Review fire and explosion hazards and

safety precautions before proceeding with cleanup. Use appropriate personal protective equipment.

Avoid contact with skin and eyes. Stop the spillage. Dike the spill. Prevent liquid from entering sewers,

waterways or low areas. Absorb spillage in inert material. Soak up with sawdust, sand, or other

absorbent material. Remove non-usable solid material and/or contaminated soil for disposal in an

approved and permitted landfill. Discharge to sewer requires approval of permitting authority and may

require pre-treatment. Contaminated surfaces should be cleaned using water.



7. HANDLING AND STORAGE



Precautions To Be Taken In Handling And Storage: Store in a cool, dry, well ventilated area. Keep

containers closed. Do not store with incompatible materials. Do not store or consume food, drink, or

tobacco where they may become contaminated with this material. Avoid contact with eyes, skin, and

clothing. Avoid breathing mist or vapor. Use with adequate ventilation. Wash thoroughly after

handling.



Other Precautions: All labeled precautions must be observed when handling, storing and transporting

empty containers due to product residues. Do not reuse containers. Triple rinse before disposal.

Dispose of in a licensed facility. Recommended crushing or other means to prevent re-use.



8. EXPOSURE CONTROL / PERSONAL PROTECTION



PERSONAL PROTECTIVE EQUIPMENT



Respiratory Protection: When this product is used in the intended way, no respiratory protection is

   anticipated to be necessary. A respirator should be worn if hazardous decomposition products

   are likely to be or have been released. Respirator type: Acid gas.

Ventilation: Good ventilation of 10 room volumes per hour. Ventilation rates should match

   conditions of use.

Protective Gloves: Impervious gloves recommended.

Eye Protection: Safety glasses with side shields (or goggles).

Date: 9/27/07                    Formula One Max Developer                                 2/4

MATERIAL SAFETY DATA SHEET



Other Protective Clothing or Equipment: Wear impervious gloves and protective clothing

   appropriate for the risk of exposure.

Work/Hygienic Practices: Use good personal hygiene when handling this product. Wash hands

   after use, before smoking or using the toilet.

Engineering Controls: Facilities storing or utilizing this material should be equipped with an

   eyewash facility and a safety shower.

Exposure Guidelines: See Section 2.



9. PHYSICAL AND CHEMICAL PROPERTIES



Appearance And Odor: Light straw color; no odor.                    Solubility In Water: Complete

Boiling Point: >100?C        Vapor Pressure: N.E.                  Ph: 10.85

Specific Gravity: 1.25 g /ml Melting Point: Not applicable          Freezing Point: N.E.

Evaporation Rate: N.E.        Vapor Density: (air = 1): 0.6         Percent Volatile: 70.21

Molecular Weight: Mixture     Pounds Per Gallon: 10.45

V.O.C. is 48.8 g/L or 3.9% or 0.41 lb. /gal.



10. STABILITY AND REACTIVITY



Stability: Stable

Conditions To Avoid: Contact with acids and metals such as aluminum, magnesium, zinc, and tin.

Incompatibility: Strong acids and oxidizers

Hazardous Decomposition Or By Products: May produce oxides of carbon and sulfur.

Hazardous Polymerization: Will Not Occur

Conditions To Avoid: None



11. TOXICOLOGICAL INFORMATION



12. ECOLOGICAL INFORMATION



13. DISPOSAL CONSIDERATIONS



The preferred options for disposal are to send to licensed reclaimers, or to permitted incinerators. Any

disposal practice must be in compliance with federal, state, and local regulations. Consult state or

local regulatory authorities before flushing to sewer with large amounts of water.



14. TRANSPORT INFORMATION



DOT Class: NOT REGULATED

Hazard Class: NONE

UN No.: NOT APPLICABLE

Packing Group:

Guide No:

Ship Name: PHOTOGRAPHIC DEVELOPER



15. REGULATORY INFORMATION



TSCA: All ingredients in this finished product are listed on the EPA TSCA INVENTORY.

SARA TITLE III: Hydroquinone and Methanol are listed under Sara Title III Section 313.





Date: 9/27/07                    Formula One Max Developer                                 3/4

MATERIAL SAFETY DATA SHEET



CALIF. PROP. 65: Product contains a mixture which includes trace amounts of Trisodium NTA. The

State of California's Safe Drinking Water and Toxic Enforcement Act of 1986, or Proposition 65

requires the following information. This regulation does not address di minimus levels; therefore, even

trace amounts of the chemicals included on Proposition 65's list of chemicals known to the State of

California to cause cancer or reproductive toxicity must be noted with the "Safe Harbor" wording.

WARNING: This product contains Trisodium NTA ?known to the State of California to cause cancer,

birth defects or other reproductive harm. This NTA is actually Cas # 5064-31-3. California lists

Trisodium NTA monohydrate Cas# 18662-53-8.

CARCINOGENICITY: NONE OF THE COMPONENTS IN THIS CHEMICAL IS LISTED BY IARC,

NTP, OR OSHA AS A CARCINOGEN.



SCAQMD Rule 443.1



Photochemically Reactive: No

Maximum Grams of VOC per Liter: 48.8 gm/L

Vapor Pressure: N.E. mm Hg@ 20 Degrees C



16. OTHER INFORMATION (HMIS)



Health: 2

Flammability: 0

Reactivity: 0

Protective: C



OTHER ADDITIONAL INFORMATION: The information contained herein is based on the data

available to us and is believed to be accurate. However, no warranty is expressed or implied regarding

the accuracy of this data or the results to be obtained from the use thereof. We assume no

responsibility for the injuries from the use of the product described herein.









Date: 9/27/07                   Formula One Max Developer                                 4/4