05122006 MATERIAL SAFETY DATA SHEET : 00000102 PAGE:1
HENKEL CONSUMER ADHESIVES
6685 KENNEDY ROAD,UNIT 1
MISSISSAUGA, ONTARIO CANADA L5T 3A5
(440) 937-7000
PRODUCT : LEPAGE PRES-TITE CONTACT CEMENT
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES_____
6685 KENNEDY ROAD, UNIT 1
MISSISSAUGA, ONTARIO
CANADA ; L5T 3A5
(440) 937-7000
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION WHMIS.......B2 D2B. D2B, D2A, E. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT
CLASSIFICATION WHMIS IT IS EXEMPT FROM WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS
CLASSIFICATION WHMIS PRODUCTS ACT).
CLASSIFICATION WHMIS
CLASSIFICATION
T.D.G. CLASSIFICATION............ADHESIVES, CLASS 3, UN 1133, PKG GRP II. WHEN THIS PRODUCT IS LABELLED AS
A CONSUMER COMMODITY IT IS EXEMPT FROM T.D.G. REGULATIONS
PRODUCT NAME.....................LEPAGE PRES-TITE CONTACT CEMENT
CHEMICAL FAMILY..................CONTACT CEMENT
MATERIAL USE.....................WOODWORKING ADHESIVE
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Solvent naptha (petroleum), 30-60 TLV: 300ppm 8hrTWA 64742-89-8 >5g/kg,oral,rat Not available
light aliphatic PEL: 500ppm 8hrTWA >3.16g/kg,skin,
rabbit
Magnesium oxide 1-5 PEL-TWA: 15 mg/m3 1309-48-4 810 mg/kg___________ Not available
TLV-TWA: 10 mg/m3 oral,mouse
2-Butanone 10-30 PEL-TWA: 200 ppm 78-93-3 2.7g/kg,oral,rat 23.5g/m3/8hr.,
4.0g/kg,oral,mouse rat
6.5g/kg,skin,rabbit
Toluene 10-30 TLV-TWA:188mg/m3 108-88-3 2.6-7.5g/kg,oral,rat 8800 ppm,4hr,rat
PEL-TWA:375mg/m3 14.1ml/kg,skin,rbt
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Yellowish liquid. Solvent odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........Not available
VAPOUR DENSITY (AIR=1)...........3.0
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................>1 (Butyl Acetate = 1)
BOILING POINT (deg C)............66 deg C
pH...............................Not available
SPECIFIC GRAVITY.................0.830
SOLUBILITY IN WATER (% W/W)......Insoluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................EXTREMELY FLAMMABLE
IF YES, UNDER WHICH..............Excessive heat, sparks and open flame. Vapours may cause flash fires.
CONDITIONS? Vapours may ignite explosively.
AUTO IGNITION TEMPERATURE........> 250 deg C
EXTINGUISHING MEDIA..............Carbon dioxide, dry chemical, foam
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes. A solid stream
of water directed on hot and/or burning material may cause violent
frothing.
FLASH POINT (C), METHOD..........-12 deg C, CC
LOWER FLAMMABLE LIMIT (% VOL)....1.0
UPPER FLAMMABLE LIMIT (% VOL)....10.0
HAZARDOUS COMBUSTION PRODUCTS....Hydrocarbons and traces of chlorine compounds. Oxides of carbon (CO,CO2).
Smoke
SECTION 05: REACTIVITY DATA
YES........................Stable, hazardous polymerization will not occur. Under normal conditions
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
05122006 MATERIAL SAFETY DATA SHEET : 00000102 PAGE:2
PRODUCT : LEPAGE PRES-TITE CONTACT CEMENT
SECTION 05: REACTIVITY DATA
YES
NO, WHICH ONES?............Strong oxidizing agents
REACTIVITY CONDITIONS ?
HAZARDOUS PRODUCTS OF............Smoke. Chlorine compounds. Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............Can cause drying and defatting of skin leading to irritation and
dermatitis. May cause irritation, especially on prolonged contact.
SKIN ABSORPTION............May be absorbed by the skin.
EYE CONTACT................Vapours cause tearing. May cause moderate to severe irritation. Causes
corneal damage.
INHALATION.................High vapour concentrations are irritating to the eyes and the respiratory
tract. May cause headaches and dizziness; are anaesthetic. May affect
central nervous system.
INGESTION..................Vomiting presents an aspiration hazard and may result in chemical
pneumonia, pulmonary edema or hemorrhage. Can cause gastro-intestinal
irritation, nausea, vomiting and diarrhea. Product may be toxic if
ingested.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......Dermatitis. Deliberate and repeated inhalation may result in teratogenic
and embryonic toxic effects. May aggravate existing eye, skin, and lung
conditions.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Eye irritation:. Moderate to severe. Skin irritation:. Components of this
formulation known to cause irritation.
SENSITIZING CAPABILITY OF........Refer to route of entry
MATERIAL
CARCINOGENICITY OF MATERIAL......Not indicated
MUTAGENICITY OF MATERIAL.........Not available
REPRODUCTIVE EFFECTS.............Risk of abortion in animal. Teratogenic and fetotoxic effects have not
been clearly demonstrated in humans.
TERATOGENICITY OF MATERIAL.......Refer to route of entry.
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated.
EYE/TYPE...................Safety glasses with side-shields
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation. Explosion-proof exhaust ventilation
LEAK/SPILL.......................Eliminate all sources of ignition. Evacuate all non-essential personnel.
Follow all applicable fire and explosion precautions during the spill
response procedure. Clean up spills immediately. For small spills:. Absorb
residual material with sand, or other absorbent material. For large
spills:. Dike area to prevent spreading. Isolate product until disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations. Since
emptied container retains product residues all labelled hazard precautions
must be observed.
HANDLING PROCEDURES AND..........Use adequate ventilation. Keep away from heat, sparks, and open flame.
EQUIPMENT Wear chemical splash goggles, gloves, and protective clothing.
SPECIAL SHIPPING INSTRUCTIONS....Ship in accordance with applicable Transportation of Dangerous Goods (TDG)
regulations. Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush with water for a minimum of 15 minutes holding lids
apart to ensure flushing of entire surface. Washing within 1 minute is
essential to achieve maximum effectiveness.
INGESTION........................Dilute with large quantities of water or milk. DO NOT induce vomiting. Get
immediate medical attention. Never give anything by mouth to an
unconscious person.
INHALATION.......................Remove victim to fresh air. If not breathing qualified personnel should
administer artificial respiration. Get medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(440)937-7000
05122006 MATERIAL SAFETY DATA SHEET : 00000102 PAGE:3
PRODUCT : LEPAGE PRES-TITE CONTACT CEMENT
SECTION 09: PREPARATION INFORMATION
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................MAY 12/2006
CANUTEC EMERGENCY (613) 996-6666
|