PART I What is the material and what do I need to know in an emergency?
1. PRODUCT IDENTIFICATION
HOMAX TOUGH AS TILE, AEROSOL 2006
TRADE NAME (AS LABELED):
PRODUCT CODES: 720753, 720771
PRODUCT USE: Refinishing Paint
SUPPLIER/MANUFACTURER'S NAME: HOMAX PRODUCTS, INC.
ADDRESS: 200 Westerly Rd.
Bellingham, WA 98226
CHEMTREC EMERGENCY NO.: 1-800-424-9300 (United States)
1-703-527-3887 (International Collect)
BUSINESS PHONE: 1-800-729-9029
DATE OF PREPARATION: November 28, 2006
This product is sold to consumers for household use in containers of relatively small volume (i.e. 5 gallon or less in size). This MSDS has been developed to address
safety concerns affecting those individuals working in warehouses and other places where large numbers of these containers are stored, as well as those affecting
potential users of this product in industrial /occupational settings. All pertinent health, safety and environmental information have been presented in this document, per the
requirements of the US Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) and Canadian WHMIS.
2. COMPOSITION and INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS # % w/w EXPOSURE LIMITS IN AIR
ACGIH-TLV OSHA-PEL NIOSH-REL
TWA STEL TWA STEL TWA STEL IDLH
mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 ppm
Solids
Titanium dioxide 13463-67-7 10 20 10 NE 15 ** NE NE NE NE
Solvents
Acetone 67-64-1 10 20 500 ppm 750 1000 ppm NE 250 ppm NE 2500 ppm
ppm
Xylenes (mixed) 1330-20-7 10 20 100 ppm 150 100 ppm NE 100 ppm 150 900 ppm
ppm REL ppm
Methyl ethyl ketone 78-93-3 15 590 885 590 NE 590 NE 3000 ppm
n-Butyl acetate 123-86-4 15 713 950 710 NE 710 950
VM&P Naphtha 8032-32-4 15 1370 NE NE NE 350 1800C NE
15
min.
n-Butyl alcohol 71-36-3 15 61 NE 300 NE NE 150C
Propellants
Dimethyl ether 115-10-6 30 - 40 NE NE NE NE NE NE NE
2. COMPOSITION and INFORMATION ON INGREDIENTS
Water and ingredients present in concentrations of Balance The ingredients in the balance of this product do not contribute significant hazards beyond those
less than 1% (or less than 0.1% if carcinogens) described in this document. All pertinent health, safety and environmental information has been
presented, per the requirements of the US Federal OSHA Hazard Communication Standard (29 CFR
1910.1200) and Canadian WHMIS.
NE = Not Established; * = respirable dust; ** = total dust. See Section 16 for Definitions of Terms Used.
Page 1 of 19
NOTE (1): ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-1998 format. This product has been classified in accordance
with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
3. HAZARD IDENTIFICATION
EMERGENCY OVERVIEW:
PHYISCAL DESCRIPTION: This product is a white liquid aerosol with a hydrocarbon odor.
HEALTH HAZARD: This product can cause irritation to the eyes or skin. This product is harmful if swallowed or inhaled. If vapors,
mists or particulates of this product are inhaled, irritation of the nose or throat could occur.
FIRE HAZARD: This product is an extremely flammable aerosol. Vapor can cause flash fire.
REACTIVITY HAZARD: This product is stable under ordinary conditions of use and storage.
ENVIRONMENTAL HAZARD: This product can pose an acute aquatic toxicity if released into the environment in sufficient quantity.
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE:
The most significant routes of occupational overexposure are inhalation and contact with skin and eyes. The symptoms of overexposure
to this product are as follows:
INHALATION: Vapors, mists, sprays, or dusts of this product can cause irritation to the respiratory tract. High concentrations of this
product can cause central nervous system depression characterized by headache, nausea, dizziness, confusion, unconsciousness, coma,
and death. Overexposure to this product can cause liver, kidney and blood disorders.
CONTACT WITH SKIN or EYES: Contact can cause eye irritation. Prolonged eye exposure may include redness, pain, and tearing. If
this product contaminates the eyes, irreversible eye injury can occur. Skin contact can result in redness, pain, ulceration and scarring.
SKIN ABSORPTION: No component of this product is known to penetrate the skin in toxicologically significant quantities.
INGESTION: If this product is swallowed, irritation to the mouth, throat, and other tissues of the gastro-intestinal system can occur.
Ingestion of this product can cause liver, kidney and blood disorders, or central nervous system effects. Ingestion of large amounts can
cause irritation, pain, vomiting, and diarrhea. If vomiting results in aspiration, chemical pneumonia could follow.
INJECTION: Accidental injection of this product can cause burning, reddening, and swelling in addition to the wound. Symptoms of
such exposure can include those described under Inhalation , Contact with Skin or Eyes, and Ingestion .
Hazardous Materials Identification System (HMIS)
Health 2
Flammability 4
Physical Hazard 1
Protective Equipment B
See Section 16 for Definition of Ratings
HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms.
ACUTE: Depending on the duration of contact, overexposures can irritate the eyes, skin, mucous membranes, and other exposed tissue.
Inhalation overexposure can result in central nervous system depression, dizziness, fatigue, vomiting, and headaches.
CHRONIC: Long-term skin or eye contact can result in dermatitis or eye irritation. Over exposure could cause adverse effects to liver,
kidney and central nervous system.
TARGET ORGANS: Acute: Skin, eyes, lungs, central nervous system. Chronic: Skin, eyes, liver, kidneys, blood and blood-forming
organs.
PART II What should I do if a hazardous situation occurs?
4. FIRST-AID MEASURES
Victims of chemical exposure must be taken for medical attention if any adverse effects occur. Take a copy of label and MSDS to
physician or health professional with victim.
SKIN EXPOSURE: If this product contaminates the skin, immediately begin decontamination with running water. Remove exposed or
contaminated clothing, taking care not to contaminate eyes. Victim must seek immediate medical attention if any adverse exposure
symptoms develop.
Page 2 of 19
EYE EXPOSURE: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient force to open
eyelids. Have victim "roll" eyes. Minimum flushing is for 15 minutes. Victim must seek medical attention.
INHALATION: If vapors, mists, or sprays of this product are inhaled, remove victim to fresh air. Victim must seek immediate medical
attention if any adverse exposure symptoms develop. If necessary, use artificial respiration to support vital functions.
INGESTION: If this product is swallowed, CALL PHYSICIAN OR POISON CONTROL CENTER FOR MOST CURRENT
INFORMATION. DO NOT INDUCE VOMITING, unless directed by medical personnel. Have victim rinse mouth with water, if
conscious. Never induce vomiting or give a diluent (e.g., water) to someone who is unconscious, having convulsions, or unable to
swallow. If contaminated individual is convulsing, maintain an open airway and obtain immediate medical attention.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Persons with pre-existing skin disorders, eye problems, impaired liver,
kidney, respiratory or lymphoid system function can be more susceptible to health effects associated with overexposures to this product.
RECOMMENDATIONS TO PHYSICIANS: Treat symptoms and eliminate overexposure.
5. FIRE-FIGHTING MEASURES
FLASH POINT (propellant & solvents): -420F (-41.10C) (Setaflash closed cup)
AUTOIGNITION TEMPERATURE: 662oF (350oC). NFPA RATING
FLAMMABILITY
FLAMMABLE LIMITS (in air by volume, %):
Lower: 3.4 %
4
Upper: 27 %
FIRE EXTINGUISHING MATERIALS: Use extinguishing material suitable to the 0
1
surrounding fire. HEALT REACTIVIT
H Y
Water Spray: OK. Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any ABC Class.
OTHER
UNUSUAL FIRE AND EXPLOSION HAZARDS: When involved in a fire, this See Section 16 for
material may decompose generating dusts, irritating fumes and toxic gases (e.g., Carbon definitions of ratings
monoxide, Carbon dioxide, and oxides of Nitrogen).
Explosion Sensitivity to Mechanical Impact: Not sensitive under normal conditions.
Explosion Sensitivity to Static Discharge: Not sensitive under normal conditions.
SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders should wear eye protection. Structural firefighters must wear
Self-Contained Breathing Apparatus and full protective equipment. Move containers from fire area if it can be done without risk to
personnel. If possible, prevent runoff water from entering storm drains, bodies of water, or other environmentally sensitive areas. Isolate
from incompatible chemicals (see Section 10, Stability and Reactivity), heat, sparks, electrical equipment, and open flame.
6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK RESPONSE: Trained personnel using pre-planned procedures should respond to uncontrolled releases. Proper
protective equipment should be used. In case of a spill, clear the affected area and protect people.
RESPONSE TO INCIDENTAL RELEASES: Personnel who have received basic chemical safety training can generally handle small-
scale releases, such as 1 container of this product. Respond to incidental chemical releases by wearing gloves, goggles, and
appropriate body protection.
RESPONSE TO NON-INCIDENTAL RELEASES: Respond to non-incidental chemical releases of this product, such as the
simultaneous puncturing of several containers, by clearing the impacted area and contacting appropriate emergency personnel. Clean
up should only be done by qualified personnel. Responders should wear the level of protection appropriate to the type of chemical
released, the volume of the material spilled, and the location where the incident has occurred. Minimum Personal Protective
Equipment should be Level B: triple-gloves, chemical resistant apron, boots, and splash goggles and Self-Contained Breathing
Apparatus. Level B should also be used when oxygen levels are below 19.5% or are unknown.
RESPONSE EQUIPMENT AND PROCEDURES: Absorb spilled liquid with polypads or other suitable absorbent materials.
Decontaminate the area thoroughly. Prevent spill rinsate from contamination of storm drains, sewers, soil or groundwater. Place all
spill residues in a suitable container and seal. Dispose of in accordance with applicable U.S. Federal, State, or local procedures or
appropriate standards of Canada (see Section 13, Disposal Considerations).
PART III How can I prevent hazardous situations from occurring?
7. HANDLING and STORAGE
Page 3 of 19
WORK PRACTICES AND HYGIENE PRACTICES: As with all chemicals, avoid getting this product ON YOU or IN YOU. Wash
thoroughly after using this product. Do not eat or drink while using this material. Avoid generating dusts, mists or sprays of this product.
Remove contaminated clothing immediately.
STORAGE AND HANDLING PRACTICES: All employees who handle this material should be trained to use it safely. Open containers
carefully on a stable surface or hold securely when using. Empty containers can contain residual material; therefore, empty containers
should be handled with care. Store containers in a cool, dry location, away from direct sunlight, sources of intense heat, or where
freezing is possible. Store away from incompatible materials (see Section 10, Stability and Reactivity). Keep container tightly closed
when not in use. Inspect all incoming containers before storage, to ensure containers are properly labeled and not damaged. Control
possible sources of ignition.
PROTECTIVE PRACTICES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT: Follow practices indicated in Section
6 (Accidental Release Measures). Make certain that application equipment is locked and tagged-out safely if necessary. Collect all
rinsates and dispose of according to applicable U.S. Federal, State, or local procedures or appropriate Canadian standards.
8. EXPOSURE CONTROLS - PERSONAL PROTECTION
VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are maintained below the
limits provided in Section 2 (Composition and Information on Ingredients). Ensure eyewash/safety shower stations are available near
areas where this product is used.
RESPIRATORY PROTECTION: None needed under normal conditions of use. Use NIOSH approved respirators if ventilation is
inadequate to control dusts, mists, fumes or vapors. Maintain airborne contaminate concentrations below guidelines listed in Section 2
(Composition and Information on Ingredients). Oxygen levels below 19.5% are considered IDLH by OSHA. In such atmospheres use of
a full-face-piece pressure/demand SCBA or a full face-piece, supplied air respirator with auxiliary self-contained air supply is required
under OSHA s Respiratory Protection Standard (29 CFR 1910.134).
EYE PROTECTION: For consumer use, wearing eye protection (such as splash goggles) is advisable. However, for specific industrial
applications, enhanced eye protection can be necessary. Use approved safety goggles or safety glasses, as described in OSHA 29 CFR
1910.133. If necessary, refer to U.S. OSHA 29 CFR 1910.133, or appropriate Canadian standards.
HAND PROTECTION: For consumer use, wearing protective gloves is recommended. For specific industrial applications, wear
chemical impervious gloves (e.g., Neoprene or Nitrile). If necessary, refer to U.S. OSHA 29 CFR 1910.138 or the appropriate standards
of Canada.
BODY PROTECTION: For consumer use, no specific body protection is normally needed. For specific industrial applications, body
protection is not normally needed. Use body protection appropriate for task (e.g., Tyvek suit, rubber apron). If a hazard of injury to the
feet exists due to falling objects, rolling objects, where objects can pierce the soles of the feet or where employee s feet can be exposed to
electrical hazards, use foot protection, as described in U.S. OSHA 29 CFR 1910.136.
HMIS PERSONAL PROTECTIVE EQUIPMENT RATING: Industrial Use situations: B; Safety glasses and gloves.
9. PHYSICAL and CHEMICAL PROPERTIES
RELATIVE VAPOR DENSITY (air = 1): > 1 EVAPORATION RATE (BuAc =1): < 1
SPECIFIC GRAVITY: 0.85 (solvent) MELTING/FREEZING POINT: Not available.
BOILING POINT: -2210F (-141.50C) (Dimethyl ether)
SOLUBILITY IN WATER: Negligible.
VAPOR PRESSURE, mm Hg @ 20癈: Not available. pH: Not applicable.
ODOR THRESHOLD: Not available.
COEFFICIENT OF OIL/WATER DISTRIBUTION (PARTITION COEFFICIENT): Not available.
Weight % V.O.C.: 56.3%.
APPEARANCE, ODOR AND COLOR: This product is a white liquid aerosol with a hydrocarbon odor.
HOW TO DETECT THIS SUBSTANCE (warning properties): The appearance and odor of this product may act as warning properties
in the event of an accidental release.
10. STABILITY and REACTIVITY
STABILITY: Stable under normal circumstances of use and handling.
DECOMPOSITION PRODUCTS: Thermal decomposition of this product may generate dusts, irritating fumes, and toxic gases (e.g.,
Carbon monoxide, Carbon dioxide, and oxides of Nitrogen).
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product is not compatible with strong bases, strong acids, and
powerful oxidizers.
Page 4 of 19
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Avoid contact with incompatible chemicals.
PART IV Is there any other useful information about this material?
11. TOXICOLOGICAL INFORMATION
TOXICITY DATA: There are currently no toxicity data available for this product; the following toxicology information is available for
components greater than 1% in concentration.
The following data are available for Acetone:
Eye effects-Human 500 ppm
Skin-Rabbit, adult 395 mg open Mild irritation effects
Skin-Rabbit, adult 500 mg/24H Mild irritation effects
Eye effects-Rabbit, adult 3950 mg Severe irritation effects
Eye effects-Rabbit, adult 20 mg/24H Moderate irritation effects
Cytogenetic Analysis-Saccharomyces cerevisiae 200 mmol/tube
Sex Chromosome Loss and Nondisjunction-Saccharomyces
cerevisiae 47,600 ppm
Inhalation-Mammal TCLo:31,500 mg/m3/24H (1-13D
preg):Reproductive effects
Oral-Man TDLo:2857 mg/kg
Oral-Man TDLo:2857 mg/kg
Inhalation-Man TCLo:12,000 ppm/4H:Central nervous system
effects
Inhalation-Man TDLo:440 mg/m3/6M
Inhalation-Man TDLo:10 mg/m3/6H
Inhalation-Human TCLo:500 ppm:Eye effects
Inhalation-Man TCLo:12,000 ppm/4H:Gastrointestinal tract
effects
Intravenous-Rat LD50:5500 mg/kg
Oral-Rat LD50:5800 mg/kg
Inhalation-Rat LC50:50,100 mg/m3/8H
Intraperitoneal-Rat LDLo:500 mg/kg
Intravenous-Rat LD50:5500 mg/kg
Oral-Mouse LD50:3000 mg/kg
Inhalation-Mouse LCLo:110 g/m3/1H
Intraperitoneal-Mouse LD50:1297 mg/kg
Intravenous-Mouse LDLo:4 g/kg
Oral-Dog, adult LDLo:8 g/kg
Oral-Rabbit, adult LD50:5340 mg/kg
Skin-Rabbit, adult LD50:20 g/kg
The following data are available for VM & P Naphtha:
Eye effects-Human 880 ppm/15M
Inhalation-Rat LC50:3400 ppm/4H
Intravenous-Mouse LD50:40 mg/kg
The following data are available for n-Butyl acetate:
Oral rat LD50: 10,800 mg/kg;
Inhalation rat LC50: 390 ppm/4H
Skin rabbit LD50: >17,600 mg/kg;
Irritant, skin rabbit (Std. Draize): 500 mg/24H, moderate. Irritant, eye rabbit: 100 mg moderate.
Investigated as a reproductive effector.
The following data are available for Butyl alcohol:
Oral rat LD50: 790 mg/kg;
Inhalation rat LC50: 8000 ppm/4H;
Skin rabbit LD50: 3400 mg/kg;
Irritation, standard Draize, skin, rabbit, 20 mg/24H moderate;
Irritation, standard Draize, eye, rabbit, 2 mg/24H severe;
Page 5 of 19
Investigated as a mutagen, reproductive effector.
The following data are available for Xylenes:
Eye effects-Human 200 ppm Oral-Human LDLo:50 mg/kg
Skin-Rabbit, adult 100% Moderate irritation effects Inhalation-Man LCLo:10,000 ppm/6H
Skin-Rabbit, adult 500 mg/24H Moderate irritation effects Inhalation-Human TCLo:200 ppm: NOSE, Eye effects, Pulmonary
Eye effects-Rabbit, adult 87 mg Mild irritation effects system effects
Eye effects-Rabbit, adult 5 mg/24H Severe irritation effects Oral-Rat LD50:4300 mg/kg
Cytogenetic Analysis-Saccharomyces cerevisiae 1 mmol/tube Inhalation-Rat LC50:5000 ppm/4H
Inhalation-Rat TCLo:50 mg/m3/6H (female 1-21D post):Reproductive Intraperitoneal-Rat LD50:2459 mg/kg
effects Oral-Unspecified effects LD50:4300 mg/kg
Inhalation-Rat TCLo:50 mg/m3/6H (female 1-21D post):Teratogenic Inhalation-Unspecified effects LC50:30 g/m3
effects
The following data are available for Methyl ethyl ketone:
Eye effects-Human 350 ppm Inhalation-Human TCLo:100 ppm/5M:Irritant effects
Skin-Rabbit, adult 500 mg/24H Moderate irritation effects Oral-Rat LD50:2737 mg/kg
Skin-Rabbit, adult 402 mg/24H Mild irritation effects Inhalation-Rat LC50:23,500 mg/m3/8H
Skin-Rabbit, adult 13,780 mg/24H open Mild irritation effects Intraperitoneal-Rat LD50:607 mg/kg
Eye effects-Rabbit, adult 80 mg Oral-Mouse LD50:4050 mg/kg
Sex Chromosome Loss and Nondisjunction-Saccharomyces Inhalation-Mouse LC50:40 g/m3/2H
cerevisiae 33,800 ppm Intraperitoneal-Mouse LD50:616 mg/kg
Inhalation-Rat TCLo:1000 ppm/(6-15D preg):Teratogenic Skin-Rabbit, adult LD50:6480 mg/kg
effects Intraperitoneal-Guinea Pig, adult LDLo:2 g/kg
Inhalation-Unspecified effects LC50:38 g/m3
The following data are available for Dimethyl ether:
Inhalation-Rat LC50: 308 g/m3
Inhalation-Mouse LC50: 386,000 ppm/30M
Inhalation-Rat TCLo: 2 pph/6H/30W-I
11. TOXICOLOGICAL INFORMATION - Continued
SUSPECTED CANCER AGENT: The following table summarizes the carcinogenicity listing for the components of this product.
NO indicates that the substance is not considered to be, or suspected to be, a carcinogen by the listed agency.
CHEMICAL IARC NTP NIOSH OSHA ACGIH PROP 65
Titanium dioxide 2B NO Ca NO A4 NO
Acetone NO NO NO NO A4 NO
Xylenes (mixed) 3 NO NO NO A4 NO
Methyl ethyl ketone NO NO NO NO NO NO
n-Butyl acetate NO NO NO NO NO NO
VM&P Naphtha NO NO NO NO NO NO
n-Butyl alcohol NO NO NO NO NO NO
Dimethyl ether NO NO NO NO NO NO
IRRITANCY OF PRODUCT: This product can be irritating to contaminated tissue. Prolonged exposure can lead to tissue damage.
SENSITIZATION TO THE PRODUCT: No component of this product is known to cause sensitization.
TOXICOLOGICAL SYNERGISTIC PRODUCTS: None known.
REPRODUCTIVE TOXICITY INFORMATION: Listed below is information concerning the effects of this product and its components
on the human reproductive system.
Mutagenicity: When used as directed, this product is not expected to produce mutagenic effects in humans.
Embryotoxicity: When used as directed, this product is not expected to produce embryotoxic effects in humans.
Page 6 of 19
Teratogenicity: When used as directed, this product is not expected to produce teratogenic effects in humans.
Reproductive Toxicity: When used as directed, this product is not expected to produce reproductive toxicity in humans.
A mutagen is a chemical that causes permanent changes to genetic material (DNA) such that the changes will propagate through
generational lines. An embryotoxin is a chemical that causes damage to a developing embryo (i.e. within the first eight weeks of
pregnancy in humans), but the damage does not propagate across generational lines. A teratogen is a chemical that causes damage to a
developing fetus, but the damage does not propagate across generational lines. A reproductive toxin is any substance that interferes in
any way with the reproductive process.
BIOLOGICAL EXPOSURES INDICES (BEIs): There are no BEI s established for any component of this product at this time.
12. ECOLOGICAL INFORMATION
ALL WORK PRACTICES MUST BE AIMED AT ELIMINATING ENVIRONMENTAL CONTAMINATION.
ENVIRONMENTAL STABILITY: There is no environmental data for any component of this product at this time.
EFFECT OF MATERIAL ON PLANTS or ANIMALS: This product can be harmful to terrestrial plant and animal life if large volumes
of it are released into the environment. Refer to Section 11, Toxicological Information , for specific animal data.
EFFECT OF CHEMICAL ON AQUATIC LIFE: This product can be harmful to animal life if large volumes of it are released into an
aquatic environment. The following aquatic toxicity data is available for components of this product:
The following data are available for Acetone: The following data are available for Xylenes (mixed):
Brown Trout/Rainbow trout: LC50: 5540 mg/L (96Hr) Rainbow trout: LC50: 13.5 mg/L (96Hr)
Sunfish: death at 14250 ppm/24Hr Goldfish: LD50: 13 mg/L (24Hr)
Mosquito fish (turbid water): TLm: 13000 ppm/ 48Hr; Fathead minnow: LC50: 46 mg/L (1Hr)
Fathead minnow: LC50: 7280 - 8120 mg/L Rainbow trout: LC50: 8.05 mg/L (96Hr) (static condition)
Bluegill: LC50: 8300 mg/L Fathead minnow: LC50: 16.1 mg/L (96Hr) (static condition)
Bluegill: LC50: 16.1 mg/L (96Hr) (flow through conditions)
Water flea: EC50: 3.82 mg/L (48Hr) (flow through conditions)
The following data are available for Butyl alcohol:
Fish: LC50 > 100 mg/L Photobacterium phosphoreum: EC50: 0.0084 mg/L (24Hr)
Daphnia: EC50 > 100 mg/L (Microtox test)
The following data are available for n-Butyl acetate: The following data are available for Methyl ethyl ketone:
Fathead Minnow: LC50: 18 mg/L flow through (96 Hr) Fathead minnow: LC50: 3220 mg/L (96Hr)
Bluegill/Sunfish: LC50: 100 mg/L static (96 Hr) Bluegill/sunfish: LC50: 3220 mg/L (96Hr)
Freshwater algea: EC50: 320 mg/L (96 Hr) Phytobacterium phosphoreum: EC50: 51.9 mg/L (25 min.)
Daphnia: EC50 44 mg/L (unspecified ria)
Phytobacterium phosphoreum: EC50: 3373 mg/L (30 min.)
(Microtox test ria)
Fathead minnow: LC50: 3220 mg/L (96Hr) (Microtox test)
Bluegill TLm : 5640 to 1690 mg/L to 96 Hr
13. DISPOSAL CONSIDERATIONS
PREPARING WASTES FOR DISPOSAL: Consumer Waste: Dispose of according to pertinent state and local household waste and
requirements. Industrial Use: Waste disposal must be in accordance with appropriate U.S. Federal, State, and local regulations or with
regulations of Canada.
EPA WASTE NUMBER: Wastes consisting only of this product are RCRA code D001; however, the specific RCRA codes depend on
the exact nature of the discarded material.
14. TRANSPORTATION INFORMATION
THIS PRODUCT IS HAZARDOUS PER 49 CFR 172.101, THE U.S. DEPARTMENT OF TRANSPORTATION.
PROPER SHIPPING NAME: Aerosols
HAZARD CLASS NUMBER and DESCRIPTION: 2.1, (Flammable)
UN IDENTIFICATION NUMBER: UN 1950
DOT LABEL(S) REQUIRED: Flammable gas
PACKAGING GROUP: N/A
NORTH AMERICAN RESPONSE GUIDEBOOK NUMBER (2000): 126
MARINE POLLUTANT: No component is designated as a DOT Marine Pollutant.
TRANSPORT CANADA TRANSPORTATION OF DANGEROUS GOODS REGULATIONS: The above-listed DOT basic
Page 7 of 19
description applies to this product under the regulations of Transport Canada.
15. REGULATORY INFORMATION
ADDITIONAL U.S. REGULATIONS:
EPA REPORTING REQUIREMENTS: The following reporting requirements are applicable to components of this product:
CHEMICAL SECTION 302 SECTION 304 SECTION 313
(40 CFR 355, Appendix A) (40 CFR Table 302.4) (40 CFR 372.65)
Titanium dioxide NO NO NO
Acetone NO 5000 lbs RQ NO
Xylenes (mixed) NO 100 lbs RQ NO
Methyl ethyl ketone NO 5000 lbs RQ NO
n-Butyl acetate NO 5000 lbs RQ NO
VM&P Naphtha NO NO NO
n-Butyl alcohol NO 5000 lbs RQ NO
Dimethyl ether NO NO NO
U.S. SARA SECTION 311/312 FOR PRODUCT: Acute health effects; chronic health effects; flammable.
U.S. TSCA INVENTORY STATUS: The components of this product are listed on the TSCA Inventory.
OTHER U.S. FEDERAL REGULATIONS: Not applicable.
CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT (PROPOSITION 65): This product does not contain
any chemicals listed on Proposition 65.
LABELING: GHS compliant
DANGER! EXTREMELY FLAMMABLE AEROSOL AND VAPOR. TOXIC IF SWALLOWED. HARMFUL TO AQUATIC LIFE.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR
FATAL. CONTENTS UNDER PRESSURE. MAY EXPLODE IF HEATED.
ANSI LABEL PRECAUTIONS:
Do not breathe fumes, dusts, vapors or mist. Do not swallow or take internally. Do not get in eyes, on skin, or on clothing. Keep away
from heat, sparks and flame. Wash thoroughly after handling. Keep container closed. Use only in a well-ventilated area. Do Not
Puncture or Incinerate Container. Do not expose to heat or store at temperatures above 120oF.
ENVIRONMENTAL HAZARDS: Do not discharge effluent containing this product into streams, ponds, estuaries, oceans or other
waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the
permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems
without previously notifying the local sewage treatment plant authority. For guidance, contact your State Water Board or Regional Office
of the EPA.
ADDITIONAL CANADIAN REGULATIONS:
CANADIAN DSL/NDSL INVENTORY STATUS: The components of this product are listed on the DSL Inventory.
CANADIAN WHMIS SYMBOLS: A - Compressed gas
B2 - Flammable and combustible material - Flammable liquid
D2A - Poisonous and infectious material Other effects Very Toxic
D2B - Poisonous and infectious material Other effects Toxic
This product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and the
MSDS contains all the information required by the CPR.
Page 8 of 19
16. OTHER INFORMATION
PREPARED BY: ADVANCED CHEMICAL SAFETY, Inc.
7563 Convoy Court
San Diego, CA 92111
(858)-874-5577
DATE OF PRINTING February 15, 2007
DEFINITIONS OF TERMS
A large number of abbreviations and acronyms appear on a MSDS. Some of these, which are commonly used, include the following:
CAS #: This is the Chemical Abstract Service Number that uniquely identifies each compound.
ACGIH - American Conference of Governmental Industrial Hygienists, a FLAMMABILITY LIMITS IN AIR:
professional association which establishes exposure limits. Much of the information related to fire and explosion is derived from the
TLV - Threshold Limit Value - an airborne concentration of a substance that National Fire Protection Association (NFPA). Flash Point - Minimum
represents conditions under which it is generally believed that nearly all workers temperature at which a liquid gives off sufficient vapors to form an ignitable
may be repeatedly exposed without adverse effect. The duration must be mixture with air. Autoignition Temperature: The minimum temperature
considered, including the 8-hour Time Weighted Average (TWA), the 15- required to initiate combustion in air with no other source of ignition. LEL - the
minute Short Term Exposure Limit, and the instantaneous Ceiling Level (C). lowest percent of vapor in air, by volume, that will explode or ignite in the
Skin absorption effects must also be considered. presence of an ignition source. UEL - the highest percent of vapor in air, by
volume, that will explode or ignite in the presence of an ignition source.
OSHA - U.S. Occupational Safety and Health Administration.
PEL - Permissible Exposure Limit - This exposure value means exactly the
TOXICOLOGICAL INFORMATION:
same as a TLV, except that it is enforceable by OSHA. The OSHA Permissible Possible health hazards as derived from human data, animal studies, or from the
Exposure Limits are based in the 1989 PELs and the June, 1993 Air
results of studies with similar compounds are presented. Definitions of some
Contaminants Rule (Federal Register: 58: 35338-35351 and 58: 40191). Both
terms used in this section are: LD50 - Lethal Dose (solids & liquids) which kills
the current PELs and the vacated PELs are indicated. The phrase, Vacated 50% of the exposed animals; LC50 - Lethal Concentration (gases) which kills
1989 PEL, is placed next to the PEL that was vacated by Court Order.
50% of the exposed animals; ppm concentration expressed in parts of material
IDLH - Immediately Dangerous to Life and Health - This level represents a
per million parts of air or water; mg/m3 concentration expressed in weight of
concentration from which one can escape within 30-minutes without suffering substance per volume of air; mg/kg quantity of material, by weight,
escape-preventing or permanent injury. The DFG - MAK is the Republic of
administered to a test subject, based on their body weight in kg. Other measures
Germany s Maximum Exposure Level, similar to the U.S. PEL. NIOSH is the
of toxicity include TDLo, the lowest dose to cause a symptom and TCLo the
National Institute of Occupational Safety and Health, which is the research arm lowest concentration to cause a symptom; TDo, LDLo, LDo, TC, TCo, LCLo,
of the U.S. Occupational Safety and Health Administration (OSHA). NIOSH
and LCo, the lowest dose (or concentration) to cause lethal or toxic effects. BEI
issues exposure guidelines called Recommended Exposure Levels (RELs).
- Biological Exposure Indices, represent the levels of determinants which are
When no exposure guidelines are established, an entry of NE is made for most likely to be observed in specimens collected from a healthy worker who
reference.
has been exposed to chemicals to the same extent as a worker with inhalation
exposure to the TLV. Ecological Information: EC is the effect concentration in
HAZARD RATINGS:
water.
HAZARDOUS MATERIALS IDENTIFICATION SYSTEM: Health
Hazard: 0 (minimal acute or chronic exposure hazard); 1 (slight acute or chronic Data from several sources are used to evaluate the cancer-causing potential of
exposure hazard); 2 (moderate acute or significant chronic exposure hazard); 3 the material. The sources and ratings are: IARC - the International Agency for
(severe acute exposure hazard; onetime overexposure can cause permanent
Research on Cancer; 1 = Carcinogenic to humans, 2A, 2B = Probably
injury and may be fatal); 4 (extreme acute exposure hazard; onetime
carcinogenic to humans, 3 = Unclassifiable as to carcinogenicity in humans, and
overexposure can be fatal). Flammability Hazard: 0 (minimal hazard); 1 4 = Probably not carcinogenic to humans. NTP - the National Toxicology
(materials that require substantial pre-heating before burning); 2 (combustible
Program; K =Known to be a human carcinogen, and R = Reasonably anticipated
liquid or solids; liquids with a flash point of 38-93 C [100-200 F]); 3 (Class IB to be a human carcinogen. RTECS - the Registry of Toxic Effects of Chemical
and IC flammable liquids with flash points below 38 C [100 F]); 4 (Class IA Substances. OSHA - Occupational Safety and Health Administration and
flammable liquids with flash points below 23 C [73 F] and boiling points below CAL/OSHA - California s subunit of the Occupational Safety and Health
38 C [100 F]. Reactivity Hazard: 0 (normally stable); 1 (material that can Administration; Ca = Carcinogen defined with no further categorization.
become unstable at elevated temperatures or which can react slightly with ACGIH American Conference of Governmental Industrial Hygienists; A1 =
water); 2 (materials that are unstable but do not detonate or which can react Confirmed human carcinogen, A2 = Suspected human carcinogen, A3 =
violently with water); 3 (materials that can detonate when initiated or which can Confirmed animal carcinogen with unknown relevance to humans, A4 = Not
react explosively with water); 4 (materials that can detonate at normal classifiable as a human carcinogen, and A5 = Not suspected as a human
temperatures or pressures). carcinogen. NIOSH U.S. National Institute for Occupational Safety and
NATIONAL FIRE PROTECTION ASSOCIATION: Health Hazard: 0 Health; Ca = Potential occupational carcinogen, with no further categorization.
(material that on exposure under fire conditions would offer no hazard beyond EPA U.S. Environmental Protection; A = Human carcinogen, B = Probable
that of ordinary combustible materials); 1 (materials that on exposure under fire human carcinogen, C = Possible human carcinogen, D = Not classifiable as to
conditions could cause irritation or minor residual injury); 2 (materials that on human carcinogenicity, E = Evidence of Non-carcinogenicity for humans, K =
intense or continued exposure under fire conditions could cause temporary Known human carcinogen, L = Likely to produce cancer in humans, CBD =
incapacitation or possible residual injury); 3 (materials that can on short Cannot be determined, NL = Not likely to be carcinogenic in humans, and I =
exposure could cause serious temporary or residual injury); 4 (materials that Data are inadequate for an assessment of human carcinogenic potential.
under very short exposure could cause death or major residual injury).
REGULATORY INFORMATION:
Flammability Hazard and Reactivity Hazard: Refer to definitions for
This section explains the impact of various laws and regulations on the material.
Hazardous Materials Identification System .
EPA is the U.S. Environmental Protection Agency. WHMIS is the Canadian
Workplace Hazardous Materials Information System. DOT and TC are the U.S.
Department of Transportation and the Transport Canada, respectively.
Superfund Amendments and Reauthorization Act (SARA); the Canadian
Domestic/Non-Domestic Substances List (DSL/NDSL); the U.S. Toxic
Substance Control Act (TSCA); Marine Pollutant status according to the DOT;
the Comprehensive Environmental Response, Compensation, and Liability Act
(CERCLA or Superfund); and various state regulations. This section also
includes information on the precautionary warnings that appear on a material s
industrial package label.
Page 9 of 19
PARTE I 緾u醠 es el material y qu?debo saber ante una emergencia?
1. IDENTIFICACION DEL PRODUCTO
TOUGH AS TILE HOMAX, AEROSOL 2006
NOMBRE COMERCIAL (SEGUN LA ETIQUETA):
CODIGOS DEL PRODUCTO: 720753, 720771
USO DEL PRODUCTO: Pintura para acabado
NOMBRE DEL FABRICANTE/PROVEEDOR: HOMAX PRODUCTS, INC.
DIRECCION: 200 Westerly Rd.
Bellingham, WA 98226, EE.UU.
N?DE CHEMTREC PARA LLAMADAS DE EMERGENCIA: 1-800-424-9300 (Estados Unidos)
1-703-527-3887 (Llamada internacional de cobro revertido)
TELEFONO COMERCIAL: 1-800-729-9029
FECHA DE PREPARACION: 28 de noviembre de 2006
Este producto se vende a los consumidores para uso dom閟tico en envases relativamente peque駉s (por ejemplo, 5 galones 18.9 l o menos). Esta Hoja de Datos sobre
Seguridad del Material (MSDS) ha sido desarrollada para abordar las cuestiones de seguridad que afectan a aquellas personas que trabajan en dep髎itos y otros lugares
donde se almacenan grandes cantidades de estos envases, adem醩 de las que ata馿n a los posibles usuarios de este producto en 醡bitos industriales/laborales. Este
documento presenta toda la informaci髇 relacionada con la salud, la seguridad y el medio ambiente seg鷑 los requisitos establecidos por el gobierno federal de los EE.UU. en
la Norma de Comunicaci髇 de Riesgos de OSHA (29 CFR 1910.1200) y por WHMIS de Canad?
2. COMPOSICION e INFORMACION SOBRE LOS INGREDIENTES
NOMBRE QUIMICO N?CAS % w/w LIMITES DE EXPOSICION EN EL AIRE
ACGIH-TLV OSHA-PEL NIOSH-REL
TWA STEL TWA STEL TWA STEL IDLH
mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 mg/m3 ppm
S髄idos
Di髕ido de titanio 13463-67-7 10 20 10 NE 15 ** NE NE NE NE
Solventes
Acetona 67-64-1 10 20 500 ppm 750 1000 ppm NE 250 ppm NE 2500 ppm
ppm
Xilenos (mezclados) 1330-20-7 10 20 100 ppm 150 100 ppm NE 100 ppm 150 900 ppm
ppm REL ppm
Metiletilcetona 78-93-3 15 590 885 590 NE 590 NE 3000 ppm
Acetato de n-butilo 123-86-4 15 713 950 710 NE 710 950
Nafta VM y P 8032-32-4 15 1370 NE NE NE 350 1800C NE
15
min.
Alcohol de n-butilo 71-36-3 15 61 NE 300 NE NE 150C
Propelentes
Eter dimet韑ico 115-10-6 30 - 40 NE NE NE NE NE NE NE
2. COMPOSICION e INFORMACION SOBRE LOS INGREDIENTES
P醙ina 10 de 19
El agua y los ingredientes se presentan en Equilibrio Los ingredientes en el equilibrio de este producto no representan riesgos importantes aparte de los
concentraciones menores que 1% (o menores que descritos en este documento. Este documento presenta toda la informaci髇 relacionada con la salud, la
0.1% si son carcin骻enos) seguridad y el medio ambiente seg鷑 los requisitos establecidos por el gobierno federal de los EE.UU.
en la Norma de Comunicaci髇 de Peligros de OSHA (29 CFR 1910.1200) y por WHMIS de Canad?
NE = No establecido; * = Polvo respirable; ** = Polvo total. Consulte la secci髇 16 para obtener informaci髇 sobre las definiciones de los t閞minos utilizados.
NOTA (1): TODA la informaci髇 requerida por WHMIS est?incluida en las secciones correspondientes seg鷑 el formato ANSI Z400.1-1998. Este producto ha sido
clasificado de acuerdo con los criterios sobre peligros de las CPR (Normativas de Productos Controlados) y la MSDS contiene toda la informaci髇 requerida por las
mismas.
3. IDENTIFICACION DE RIESGOS
REPASO DE EMERGENCIA:
DESCRIPCION FISICA: Este producto es un l韖uido blanco en aerosol con olor a hidrocarburo.
RIESGOS PARA LA SALUD: Este producto puede irritar los ojos y la piel. Es t髕ico si se lo ingiere o inhala. Si se inhalan los
vapores, el roc韔 o las part韈ulas de este producto, puede producirse irritaci髇 en la nariz o la garganta.
RIESGOS DE INCENDIO: Este producto es un aerosol extremadamente inflamable. Los vapores pueden provocar un incendio
repentino.
RIESGOS DE REACTIVIDAD: Este producto es estable en condiciones normales de uso y almacenamiento.
RIESGOS AMBIENTALES: Es posible que este producto provoque toxicidad aguda si se lo libera en cantidades suficientes en el
medioambiente acu醫ico.
SINTOMAS DE SOBREEXPOSICION POR VIA DE EXPOSICION:
La inhalaci髇 y el contacto con la piel y los ojos son las v韆s m醩 importantes de sobreexposici髇 laboral. Los s韓tomas de la
sobreexposici髇 a este producto son los siguientes:
INHALACION: Los vapores, roc韔s o polvos de este producto pueden causar irritaci髇 en las v韆s respiratorias. Las altas
concentraciones de este producto pueden causar la depresi髇 del sistema nervioso central caracterizada por cefalea, n醬seas, mareos,
confusi髇, coma y muerte. La sobreexposici髇 a este producto puede provocar trastornos en el h韌ado, los ri駉nes y la sangre.
CONTACTO CON LA PIEL o LOS OJOS: El contacto puede provocar irritaci髇 en los ojos. La exposici髇 ocular prolongada puede
provocar enrojecimiento, dolor y secreci髇 de l醙rimas, entre otros. Si contamina los ojos, puede provocar lesiones oculares
irreversibles. El contacto con la piel puede producir enrojecimiento, dolor, ulceraci髇 y formaci髇 de cicatrices.
ABSORCION POR LA PIEL: No se conocen casos en los que alg鷑 componente de este producto haya penetrado la piel en cantidades
toxicol骻icamente significativas.
INGESTION: En caso de ingesti髇, este producto puede producir irritaci髇 en la boca, la garganta y los dem醩 tejidos del sistema
gastrointestinal. Puede provocar trastornos en el h韌ado, los ri駉nes y la sangre, adem醩 de da馻r el sistema nervioso central. La
ingesti髇 en grandes cantidades puede causar irritaci髇, dolor, v髆itos y diarrea. Si se produce aspiraci髇 por v髆itos, puede
desencadenarse una neumon韆 qu韒ica.
INYECCION: La inyecci髇 accidental de este producto puede provocar quemaduras, enrojecimiento e hinchaz髇, adem醩 de heridas. Los
s韓tomas de dicha exposici髇 pueden incluir lo descrito en "Inhalaci髇", "Contacto con la piel o los ojos" e "Ingesti髇".
Sistema de Identificaci髇 de Materiales Peligrosos (HMIS)
Salud 2
Inflamabilidad 4
Peligro f韘ico 1
Equipo protector B
Consulte la secci髇 16 para obtener informaci髇 sobre la definici髇 de los niveles de peligrosidad
DA袿S O RIESGOS PARA LA SALUD POR EXPOSICION: Explicaci髇 en t閞minos legos.
AGUDO: Las sobreexposiciones pueden provocar irritaci髇 en los ojos, la piel, las membranas mucosas y dem醩 tejidos expuestos,
dependiendo de la duraci髇 del contacto. La exposici髇 por inhalaci髇 puede provocar la depresi髇 del sistema nervioso central, mareos,
fatiga, v髆itos y cefalea.
CRONICO: El contacto a largo plazo con los ojos y la piel puede desencadenar dermatitis e irritaci髇 ocular. La sobreexposici髇 puede
causar efectos adversos en el h韌ado, los ri駉nes y el sistema nervioso central.
ORGANOS AFECTADOS: Agudo: Piel, ojos, pulmones, sistema nervioso central. Cr髇ico: Piel, ojos, h韌ado, ri駉nes, sangre y
髍ganos que forman la sangre.
P醙ina 11 de 19
PARTE II 縌u?debo hacer ante una situaci髇 de peligro?
4. MEDIDAS DE PRIMEROS AUXILIOS
Las v韈timas de exposici髇 qu韒ica deben recibir atenci髇 m閐ica en caso de producirse efectos adversos. Entregue una copia de la
etiqueta y la MSDS al m閐ico o profesional de la salud que atienda a la v韈tima.
EXPOSICION DE LA PIEL: Si este producto contamina la piel, descontam韓ela inmediatamente con agua corriente. Qu韙ese la ropa
expuesta o contaminada, tratando de no contaminar los ojos. La v韈tima debe recibir atenci髇 m閐ica inmediata si presenta s韓tomas
adversos debido a la exposici髇.
EXPOSICION OCULAR: Si este producto penetra en los ojos, mantenga los ojos de la v韈tima abiertos mientras los enjuaga
cuidadosamente con agua. Emplee la fuerza necesaria para abrir los p醨pados. Evite que la v韈tima ponga los ojos en blanco. Debe
lavarlos durante 15 minutos como m韓imo. La v韈tima debe recibir atenci髇 m閐ica.
INHALACION: En caso de inhalaci髇 de los vapores o el roc韔 de este producto, saque a la persona al aire libre. La v韈tima debe recibir
atenci髇 m閐ica inmediata si presenta s韓tomas adversos debido a la exposici髇. De ser necesario, administre respiraci髇 artificial para
mantener las funciones vitales.
INGESTION: En caso de ingesti髇 del producto, LLAME A UN MEDICO O CENTRO DE TOXICOLOGIA PARA OBTENER
INFORMACION ACTUALIZADA. NO INDUZCA EL VOMITO, salvo indicaci髇 m閐ica. Si la v韈tima est?consciente, haga que se
enjuague la boca con agua. Nunca induzca el v髆ito ni suministre un diluyente (por ejemplo, agua) a alguien que est?inconsciente, con
convulsiones o que no puede tragar. Si la persona contaminada sufre convulsiones, mantenga abierta la v韆 respiratoria y llame
inmediatamente a un m閐ico.
AFECCIONES AGRAVADAS POR LA EXPOSICION: Las personas con trastornos en la piel, problemas oculares y funciones
afectadas preexistentes en el h韌ado, los ri駉nes, el sistema respiratorio o el linfoide pueden ser m醩 susceptibles a sufrir da駉s a la salud
asociados con las sobreexposiciones a este producto.
RECOMENDACIONES PARA EL MEDICO: Trate los s韓tomas y elimine la sobreexposici髇.
5. MEDIDAS PARA COMBATIR EL FUEGO
PUNTO DE INFLAMACION (propelente y solventes): -42 0F
(-41.1 0C) (Crisol cerrado Setaflash)
NIVELES NFPA
TEMPERATURA DE AUTOIGNICION: 662 oF (350 oC). INFLAMABILIDA
D
LIMITES DE INFLAMABILIDAD (en aire por volumen, %):
4
Inferior: 3.4 %
Superior: 27 %
0
1
MATERIALES PARA COMBATIR EL FUEGO: Utilice SALU REACTIVIDA
materiales de extinci髇 adecuados para el fuego circundante. D D
Aerosol de agua: S? Di髕ido de carbono: S?br>
Espuma: S? Qu韒icos secos: S?br>
OTROS
Hal髇: S? Otros: Cualquiera de Consulte la secci髇 16 para
clase ABC . obtener informaci髇 sobre
las definiciones de los niveles
PELIGROS INUSUALES DE FUEGO Y EXPLOSION:
de peligrosidad
Cuando entra en contacto con el fuego, este material puede
descomponerse y generar polvo, gases irritantes y gases
t髕icos (por ejemplo, mon髕ido de carbono, di髕ido de
carbono y 髕idos de nitr骻eno).
Sensibilidad a la explosi髇 ante un impacto mec醤ico: No
es sensible en condiciones normales.
Sensibilidad a la explosi髇 ante una descarga est醫ica: No
es sensible en condiciones normales.
PROCEDIMIENTOS ESPECIALES PARA COMBATIR EL
FUEGO: Las personas que combaten fuegos incipientes deben
protegerse los ojos. Los bomberos estructurales deben usar
respirador aut髇omo y equipo protector. Retire los envases de
las 醨eas de fuego s髄o si esto no pone en riesgo al personal. De ser posible, evite que el agua de deriva ingrese en las bocas de tormenta,
masas de agua u otras 醨eas ambientalmente sensibles desde el punto de vista ecol骻ico. Mantenga el producto alejado de sustancias
qu韒icas incompatibles (consulte la Secci髇 10, Estabilidad y Reactividad), el calor, las chispas, los equipos el閏tricos y las llamas.
P醙ina 12 de 19
6. MEDIDAS PARA ESCAPES ACCIDENTALES
RESPUESTA ANTE DERRAMES Y FILTRACIONES: El personal entrenado que utiliza procedimientos previamente planificados debe
responder ante los escapes no controlados. Debe usarse el equipo de protecci髇 apropiado. En caso de derrame, limpie el 醨ea afectada y
proteja a las personas.
RESPUESTA ANTE ESCAPES ACCIDENTALES: Generalmente, el personal que ha recibido entrenamiento b醩ico de seguridad
para sustancias qu韒icas puede manejar escapes en peque馻 escala, tales como el que produce 1 envase de este producto. Use guantes,
gafas y protecci髇 corporal apropiada en caso de responder a los escapes accidentales de sustancias qu韒icas.
RESPUESTAS ANTE ESCAPES NO ACCIDENTALES: En caso de escapes no accidentales de sustancias qu韒icas, como la
perforaci髇 simult醤ea de varios envases, limpie el 醨ea afectada y comun韖uese con el personal de emergencia que corresponda. La
limpieza debe realizarse 鷑icamente por personal calificado. Los encargados de la misma deben usar protecci髇 del nivel adecuado al
tipo de sustancia qu韒ica liberada, el volumen de material derramado y el lugar donde se ha producido el incidente. El equipo
protector personal m韓imo debe ser de nivel B: guantes triples, delantal resistente a productos qu韒icos, botas, gafas antisalpicadura y
respirador aut髇omo. El nivel B tambi閚 debe utilizarse cuando los niveles de ox韌eno son inferiores al 19.5% o no se conocen.
EQUIPO DE RESPUESTA Y PROCEDIMIENTOS: Absorba el l韖uido derramado con PolyPads?u otros materiales absorbentes
adecuados. Descontamine bien el 醨ea. Evite que los l韖uidos de enjuague del derrame contaminen las bocas de tormenta, sumideros o
aguas superficiales o subterr醤eas. Coloque todos los residuos del derrame en un envase adecuado y s閘lelo. Deseche los residuos de
acuerdo con los procedimientos federales, estatales o locales aplicables de los EE.UU. o seg鷑 los est醤dares correspondientes de Canad?br>
(consulte la Secci髇 13, Consideraciones sobre la eliminaci髇 de desechos).
PARTE III 緾髆o se pueden prevenir las situaciones de riesgo?
7. MANIPULACION y ALMACENAMIENTO
PRACTICAS LABORALES Y PRACTICAS HIGIENICAS: Al igual que con todos los qu韒icos, evite el CONTACTO y la
INGESTION de este producto. L醰ese bien despu閟 de utilizarlo. No coma ni beba mientras utiliza este material. Evite generar polvo,
vapores o roc韔 de este producto. Qu韙ese la ropa contaminada de inmediato.
PRACTICAS DE ALMACENAMIENTO Y MANIPULACION: Todos los empleados que manipulan este material deben recibir
entrenamiento para poder utilizarlo en forma segura. Abra los envases con cuidado sobre una superficie estable o sost閚galos firmemente
mientras lo utilice. Los envases vac韔s pueden contener material residual; por consiguiente, deben manipularse con cuidado. Guarde
los envases en lugar fresco y seco, lejos de la luz del sol directa, las fuentes de calor intenso o donde pueda producirse congelamiento.
Almacene el producto lejos de materiales incompatibles (consulte la secci髇 10, Estabilidad y Reactividad). Mantenga el envase bien
cerrado cuando no lo utilice. Inspeccione todos los envases entrantes antes de su almacenamiento para asegurarse de que est閚
correctamente etiquetados y sin da駉s. Controle las posibles fuentes de ignici髇.
PRACTICAS DE PROTECCION DURANTE EL MANTENIMIENTO DEL EQUIPO CONTAMINADO: Siga las pr醕ticas indicadas
en la Secci髇 6 (Medidas para escapes accidentales). De ser necesario, aseg鷕ese de que el equipo aplicador est?cerrado y etiquetado en
forma segura. Recoja todos los derrames y desechos de acuerdo con los procedimientos federales, estatales o locales aplicables de los
EE.UU. o los est醤dares correspondientes de Canad?
8. CONTROLES DE EXPOSICION - PROTECCION PERSONAL
CONTROLES DE INGENIERIA Y VENTILACION: Utilice la ventilaci髇 adecuada para asegurarse de que los niveles de exposici髇 se
mantengan debajo de los l韒ites establecidos en la Secci髇 2 (Composici髇 e Informaci髇 sobre los Ingredientes). Aseg鷕ese de contar
con estaciones de lavado ocular y duchas de seguridad cerca de las 醨eas donde se utiliza este producto.
PROTECCION RESPIRATORIA: No es necesaria en condiciones normales de uso. Use respiradores aprobados por NIOSH si la
ventilaci髇 no es la apropiada para controlar polvo, roc韔, gases o vapores. Mantenga las concentraciones de sustancias contaminantes en
el aire por debajo de las pautas mencionadas en la Secci髇 2 (Composici髇 e Informaci髇 sobre los Ingredientes). Los niveles de ox韌eno
inferiores al 19.5% son considerados peligros inmediatos para la vida o la salud (IDLH) por OSHA. En dichas atm髎feras, el Est醤dar de
Protecci髇 Respiratoria de OSHA (29 CFR 1910.134) exige el uso de un aparato de respiraci髇 aut髇omo (SCBA) con m醩cara completa
a presi髇 por demanda o de un respirador con m醩cara completa y suministro de aire aut髇omo auxiliar.
PROTECCION OCULAR: Se recomienda a los consumidores el uso de protecci髇 ocular (como gafas antisalpicadura). No obstante, en
caso de aplicaciones industriales espec韋icas, se recomienda una mayor protecci髇 ocular. Use gafas o anteojos protectores aprobados,
seg鷑 lo descrito en OSHA 29 CFR 1910.133. De ser necesario, rem韙ase al 29 CFR 1910.133 de OSHA de EE.UU. o a los est醤dares
correspondientes de Canad?
PROTECCION PARA LAS MANOS: Se recomienda a los consumidores el uso de guantes protectores. Para aplicaciones industriales
espec韋icas, use guantes impermeables a qu韒icos (por ejemplo, los de neopreno o nitrilo). De ser necesario, rem韙ase al 29 CFR
1910.138 de OSHA de EE.UU. o a los est醤dares correspondientes de Canad?
PROTECCION CORPORAL: Normalmente no se requiere protecci髇 corporal espec韋ica para el consumidor. En el caso de aplicaciones
industriales espec韋icas, normalmente no se requiere protecci髇 corporal. Utilice la protecci髇 corporal adecuada para la tarea (por
ejemplo, traje Tyvek, delantal de goma). Use protecci髇 para los pies donde exista el riesgo de sufrir lesiones en los mismos debido a
P醙ina 13 de 19
objetos que puedan caer, rodar o perforar las suelas, o donde los pies del empleado est閚 expuestos a riesgos el閏tricos, seg鷑 lo
descrito en el 29 CFR 1910.136 de OSHA de EE.UU.
CLASIFICACION DEL EQUIPO PROTECTOR PERSONAL DEL HMIS: Situaciones de uso industrial: B; Guantes y gafas
protectoras.
9. PROPIEDADES FISICAS y QUIMICAS
DENSIDAD DE VAPOR RELATIVA (aire = 1): > 1 INDICE DE EVAPORACION (BuAc =1): < 1
GRAVEDAD ESPECIFICA: 0.85 (solvente) PUNTO DE FUSION/CONGELACION: No disponible.
PUNTO DE EBULLICION: -42 0F (-141 0C) (Eter dimet韑ico
SOLUBILIDAD EN AGUA: Insignificante.
propelente)
PRESION DEL VAPOR, mm Hg a 20 癈: No disponible. pH: No corresponde.
UMBRAL DE OLOR: No disponible.
COEFICIENTE DE DISTRIBUCION EN AGUA/ACEITE (COEFICIENTE DE PARTICION): No disponible.
Peso % VOC: 56.3%.
ASPECTO, OLOR Y COLOR: Este producto es un l韖uido blanco en aerosol con olor a hidrocarburo.
COMO DETECTAR ESTA SUSTANCIA (propiedades de advertencia): El aspecto y el olor de este producto pueden actuar como
propiedades de advertencia en caso de fuga accidental.
10. ESTABILIDAD y REACTIVIDAD
ESTABILIDAD: Estable en condiciones normales de uso y manipulaci髇.
PRODUCTOS DE DESCOMPOSICION: La descomposici髇 termal de este producto puede generar polvo, gases irritantes y gases
t髕icos (por ejemplo, mon髕ido de carbono, di髕ido de carbono y 髕idos de nitr骻eno).
MATERIALES INCOMPATIBLES CON LA SUSTANCIA: Este producto no es compatible con bases fuertes, 醕idos fuertes y
oxidantes potentes.
POLIMERIZACION RIESGOSA: No ocurrir?
CONDICIONES QUE DEBEN EVITARSE: Evite el contacto con sustancias qu韒icas incompatibles.
PARTE IV 縃ay otra informaci髇 de utilidad sobre este material?
11. INFORMACION TOXICOLOGICA
DATOS DE TOXICIDAD: Actualmente no se encuentran disponibles los datos sobre la toxicidad de este producto; la siguiente
informaci髇 toxicol骻ica se refiere a los componentes cuya concentraci髇 supera el 1%.
Los datos disponibles sobre la acetona son los siguientes:
Efectos en los ojos, humano 500 ppm TCLo (concentraci髇 t髕ica baja) inhalaci髇, humano: 500
Piel, conejo, adulto 395 mg: Efectos abiertos de irritaci髇 leve ppm: Efectos en los ojos
Piel, conejo, adulto 500 mg/24H: Efectos de irritaci髇 leve TCLo (concentraci髇 t髕ica baja) inhalaci髇, hombre: 12,000
Efectos en los ojos, conejo, adulto 3950 mg: Efectos de ppm/4H: Efectos en el tracto gastrointestinal
irritaci髇 grave LD50 intravenoso, rata: 5500 mg/kg
Efectos en los ojos, conejo, adulto 20 mg/24H: Efectos de LD50 oral, rata: 5800 mg/kg
irritaci髇 moderada LC50 (concentraci髇 letal), inhalaci髇, rata: 50,100 mg/m3/8H
An醠isis citogen閠ico, saccharomyces cerevisiae 200 mmol/tubo LDLo (dosis letal baja) intraperitoneal, rata: 500 mg/kg
LD50 intravenoso, rata: 5500 mg/kg
LD50 oral, rat髇: 3000 mg/kg
P閞dida y no disyunci髇 de cromosomas sexuales,
LCLo (concentraci髇 letal baja) inhalaci髇, rat髇: 110 g/m3/1H
Saccharomyces cerevisiae 47,600 ppm
TCLo (concentraci髇 t髕ica baja), inhalaci髇, mam韋ero:
31,500 mg/m3/24H (1-13D pre馻da): Efectos reproductivos LD50 intraperitoneal, rat髇: 1297 mg/kg
TDLo (dosis t髕ica baja) oral, hombre: 2857 mg/kg LDLo (dosis letal baja) intravenosa, rat髇: 4 g/kg
TDLo (dosis t髕ica baja) oral, hombre: 2857 mg/kg LDLo (dosis letal baja) oral, perro, adulto: 8 g/kg
TCLo (concentraci髇 t髕ica baja) inhalaci髇, hombre: 12,000 LD50 oral, conejo, adulto: 5340 mg/kg
ppm/4H: Efectos en el sistema nervioso central LD50 piel, conejo, adulto: 20 g/kg
TDLo (dosis t髕ica baja) inhalaci髇, hombre: 440 mg/m3/6M
TDLo (dosis t髕ica baja) inhalaci髇, hombre: 10 mg/m3/6H
P醙ina 14 de 19
Los datos disponibles sobre la nafta VM y P son los siguientes:
Efectos oculares, humano 880 ppm/15M
LC50 inhalaci髇, rata: 3400 ppm/4H
LD50 intravenoso, rat髇: 40 mg/kg
Los datos disponibles sobre el acetato de n-butilo son los siguientes:
LD50 oral, rata: 10,800 mg/kg;
LC50 (concentraci髇 letal), inhalaci髇, rata: 390 ppm/4H
LD50 piel, conejo: >17,600 mg/kg;
irritante, piel, conejo (prueba Draize est醤dar): 500 mg/24H, moderado. Irritante, ojos, conejo: 100 mg moderado.
Investigado como alterador reproductivo.
Los datos disponibles sobre el alcohol but韑ico son los siguientes:
LD50 oral, rata: 790 mg/kg;
LC50 (concentraci髇 letal), inhalaci髇, rata: 8000 ppm/4H;
LD50 piel, conejo: 3400 mg/kg;
Irritaci髇, prueba Draize est醤dar, piel, conejo, 20 mg/24H moderado;
Irritaci髇, prueba Draize est醤dar, ojos, conejo, 2 mg/24H severo;
Investigado como mut醙eno y alterador reproductivo.
Los datos disponibles sobre los xilenos son los siguientes:
Efectos en los ojos, humano 200 ppm LDLo (dosis letal baja) oral, humano: 50 mg/kg
Piel, conejo, adulto 100% Efectos de irritaci髇 moderada LCLo (concentraci髇 letal baja) inhalaci髇, hombre: 10,000 ppm/6H
Piel, conejo, adulto 500 mg/24H: Efectos de irritaci髇 moderada TCLo (concentraci髇 t髕ica baja) inhalaci髇, humano: 200 ppm:
Efectos en los ojos, conejo, adulto 87 mg: Efectos de irritaci髇 leve NARIZ, efectos en los ojos y en el sistema pulmonar
Efectos en los ojos, conejo, adulto 5 mg/24H: Efectos de irritaci髇 LD50 oral, rata: 4300 mg/kg
severa LC50 inhalaci髇, rata: 5000 ppm/4H
An醠isis citogen閠ico, saccharomyces cerevisiae 1 mmol/tubo LD50 intraperitoneal, rata: 2459 mg/kg
TCLo (concentraci髇 t髕ica baja) inhalaci髇, rata: 50 mg/m3/6H LD50 oral, efectos no especificados: 4300 mg/kg
(hembra 1-21D post): Efectos reproductivos LC50 (concentraci髇 letal), inhalaci髇, efectos no especificados: 30
TCLo (concentraci髇 t髕ica baja) inhalaci髇, rata: 50 mg/m3/6H g/m3
(hembra 1-21D post): Efectos teratog閚icos
Los datos disponibles sobre la metiletilcetona son los siguientes:
Efectos en los ojos, humano 350 ppm TCLo (concentraci髇 t髕ica baja) inhalaci髇, humano: 100
Piel, conejo, adulto 500 mg/24H: Efectos de irritaci髇 moderada ppm/5M: Efectos irritantes
LD50 oral, rata: 2737 mg/kg
LC50 (concentraci髇 letal), inhalaci髇, rata: 23,500 mg/m3/8H
Piel, conejo, adulto 402 mg/24H: Efectos de irritaci髇 leve
LD50 intraperitoneal, rata: 607 mg/kg
Piel, conejo, adulto 13,780 mg/24H: Efectos abiertos de
LD50 oral, rat髇: 4050 mg/kg
irritaci髇 leve
LC50 (concentraci髇 letal), inhalaci髇, rat髇: 40 g/m3/2H
Efectos en los ojos, conejo, adulto 80 mg
LD50 intraperitoneal, rat髇: 616 mg/kg
P閞dida y no disyunci髇 de cromosomas sexuales,
LD50 piel, conejo, adulto: 6480 mg/kg
Saccharomyces cerevisiae 33,800 ppm
LDLo (dosis letal baja) intraperitoneal, cobayo, adulto: 2 g/kg
TCLo (concentraci髇 t髕ica baja) inhalaci髇, rata: 1000
LC50 (concentraci髇 letal), inhalaci髇, efectos no especificados:
ppm/(6-15D pre馻da): Efectos teratog閚icos
38 g/m3
Los datos disponibles sobre el 閠er dimet韑ico son los siguientes:
LC50 (concentraci髇 letal), inhalaci髇, rata: 308 g/m3
LC50 (concentraci髇 letal), inhalaci髇, rat髇: 386,000 ppm/30M
TCLo (concentraci髇 t髕ica baja), inhalaci髇, rata: 2 pph/6H/30W-I
11. INFORMACION TOXICOLOGICA - Continuaci髇
AGENTE CANCERIGENO SOSPECHADO: La tabla siguiente sintetiza la carcinogenicidad indicada para los componentes de este
producto. NO indica que la agencia mencionada no considera ni sospecha que la sustancia sea carcin骻ena.
P醙ina 15 de 19
QUIMICO IARC NTP NIOSH OSHA ACGIH PROP 65
Di髕ido de titanio 2B NO Ca NO A4 NO
Acetona NO NO NO NO A4 NO
Xilenos (mezclados) 3 NO NO NO A4 NO
Metiletilcetona NO NO NO NO NO NO
Acetato de n-butilo NO NO NO NO NO NO
Nafta VM y P NO NO NO NO NO NO
Alcohol de n-butilo NO NO NO NO NO NO
Eter dimet韑ico NO NO NO NO NO NO
IRRITABILIDAD DEL PRODUCTO: Este producto puede provocar irritaci髇 en los tejidos contaminados. La exposici髇 prolongada
puede provocar da駉 en los tejidos.
SENSIBILIDAD AL PRODUCTO: No se conocen casos en los que alg鷑 componente de este producto provoque sensibilidad.
PRODUCTOS TOXICOLOGICOS SINERGISTICOS: No se conocen.
INFORMACION SOBRE TOXICIDAD REPRODUCTIVA: A continuaci髇 se menciona la informaci髇 relacionada con los efectos que
este producto y sus componentes ejercen sobre el sistema reproductor humano.
Mutagenicidad: Este producto no produce efectos mutag閚icos en los humanos si se utiliza seg鷑 las instrucciones.
Embriotoxicidad: Este producto no produce efectos embriot髕icos en los humanos si se utiliza seg鷑 las instrucciones.
Teratogenicidad: Este producto no produce efectos teratog閚icos en los humanos si se utiliza seg鷑 las instrucciones.
Toxicidad reproductiva: Este producto no produce toxicidad reproductiva en los humanos si se utiliza seg鷑 las instrucciones.
Un mut醙eno es una sustancia qu韒ica que produce cambios permanentes al material gen閠ico (ADN), los cuales se propagan a trav閟
de l韓eas generacionales. Una embriotoxina es una sustancia qu韒ica que provoca da駉s al embri髇 en desarrollo (es decir, dentro de
las primeras ocho semanas de embarazo en humanos), pero los da駉s no se propagan a trav閟 de las l韓eas generacionales. Un
terat骻eno es una sustancia qu韒ica que provoca da駉s al feto en desarrollo, pero los da駉s no se propagan a trav閟 de l韓eas
generacionales. Una toxina reproductiva es cualquier sustancia que interfiere de alg鷑 modo con el proceso reproductivo.
INDICES DE EXPOSICIONES BIOLOGICAS (BEI): Actualmente no hay ning鷑 BEI establecido para los componentes de este
producto.
12. INFORMACION ECOLOGICA
TODAS LAS PRACTICAS LABORALES DEBEN ESTAR ORIENTADAS HACIA LA ELIMINACION DE LA CONTAMINACION
AMBIENTAL.
ESTABILIDAD AMBIENTAL: Actualmente no se dispone de datos ambientales para los componentes de este producto.
EFECTOS DEL MATERIAL SOBRE PLANTAS o ANIMALES: Este producto puede ser t髕ico para plantas y animales terrestres si se
liberan grandes vol鷐enes del mismo en el medioambiente. Rem韙ase a la Secci髇 11, Informaci髇 toxicol骻ica , para obtener datos
espec韋icos sobre los animales.
EFECTO DE LA SUSTANCIA QUIMICA SOBRE LA VIDA ACUATICA: Este producto puede ser t髕ico para la vida animal si se
liberan grandes vol鷐enes del mismo en el medioambiente acu醫ico. Se encuentran disponibles los siguientes datos sobre la toxicidad
acu醫ica de los componentes de este producto:
Los datos disponibles sobre la acetona son los siguientes: Los datos disponibles sobre los xilenos (mezclados) son los
Trucha de r韔/trucha arcoiris: LC50: 5540 mg/l (96 horas) siguientes:
Pez luna: muerte a 14250 ppm/24 horas Trucha arcoiris: LC50: 13.5 mg/l (96 horas)
Pez mosquito (agua turbia): TLm: 13000 ppm/ 48 horas; Pez dorado: LD50: 13 mg/l (24 horas)
Foxino cabez髇: LC50: 7280 - 8120 mg/l Foxino cabez髇: LC50: 46 mg/l (1 hora)
Agalla azul: LC50: 8300 mg/l Trucha arcoiris: LC50: 8.05 mg/l (96 horas) (condiciones est醫icas)
Foxino cabez髇: LC50: 16.1 mg/l (96 horas) (condiciones est醫icas)
Agalla azul: LC50: 16.1 mg/l (96 horas) (condiciones de flujo
Los datos disponibles sobre el alcohol but韑ico son los
continuo)
siguientes:
Peces: LC50 > 100 mg/l Pulga de agua: EC50: 3.82 mg/l (48 horas) (condiciones de flujo
Dafnia: EC50 > 100 mg/l continuo)
Photobacterium phosphoreum: EC50: 0.0084 mg/l (24 horas)
(prueba Microtox)
Los datos disponibles sobre el acetato de n-butilo son los
siguientes:
Foxino cabez髇: LC50: 18 mg/l, flujo continuo (96 horas) Los datos disponibles sobre la metiletilcetona son los siguientes:
P醙ina 16 de 19
Agalla azul/Pez luna: LC50: 100 mg/l, est醫ico (96 horas) Foxino cabez髇: LC50: 3220 mg/l (96 horas)
Algas de agua dulce: EC50: 320 mg/l (96 horas) Agalla azul/Pez luna: LC50: 3220 mg/l (96 horas)
Dafnia: EC50 44 mg/l Phytobacterium phosphoreum: EC50: 51.9 mg/l (25 min.)
(radioinmunoan醠isis no especificado)
Phytobacterium phosphoreum: EC50: 3373 mg/l (30 min.)
(radioinmunoan醠isis por prueba Microtox)
Foxino cabez髇: LC50: 3220 mg/l (96 horas) (prueba Microtox)
TLm agalla azul: 5640 a 1690 mg/l a 96 horas
13. CONSIDERACIONES SOBRE LA ELIMINACION DE DESECHOS
PREPARACION DE LOS DESECHOS PARA SU ELIMINACION: Desechos de consumidores: Deseche los residuos de acuerdo con
los requisitos estatales y locales pertinentes a los residuos dom閟ticos. Uso industrial: El desecho de residuos debe realizarse de acuerdo
con las normas federales, estatales y locales de los EE.UU. o con las normas de Canad?
NUMERO DE DESECHO DE EPA: Los desechos provenientes 鷑icamente de este producto tienen el c骴igo D001 RCRA; no obstante,
los c骴igos RCRA espec韋icos dependen de la naturaleza exacta del material desechado.
14. INFORMACION DE TRANSPORTE
ESTE PRODUCTO SE CONSIDERA PELIGROSO SEGUN EL 49 CFR 172.101 DEL DEPARTAMENTO DE TRANSPORTE DE
LOS EE.UU.
DENOMINACION DEL ARTICULO EXPEDIDO: Aerosoles
NUMERO Y DESCRIPCION DE LA CLASIFICACION DE RIESGO: 2.1, (Inflamable)
NUMERO DE IDENTIFICACION DE UN (NACIONES UNIDAS): UN 1950
ETIQUETA(S) REQUERIDA(S) POR EL DOT (DEPARTAMENTO DE TRANSPORTE DE EE.UU.): Gas
inflamable
GRUPO DE EMPAQUE: N/C
NUMERO DE LA GUIA NORTEAMERICANA DE RESPUESTAS (2000): 126
CONTAMINANTE MARINO: Ning鷑 componente ha sido designado como contaminante marino seg鷑 el DOT.
NORMAS PARA EL TRANSPORTE DE MERCANCIAS PELIGROSAS DE CANADA: La descripci髇 b醩ica establecida por el
DOT y mencionada anteriormente se aplica a este producto bajo las normas del Ministerio de Transporte de Canad?(Transport Canada).
15. INFORMACION SOBRE REGLAMENTACIONES
NORMAS ADICIONALES DE LOS EE.UU.:
REQUISITOS DE INFORMES DE EPA: Los siguientes requisitos para los informes se aplican a los componentes de este producto:
QUIMICO SECCION 302 SECCION 304 SECCION 313
(40 CFR 355, Ap閚dice A) (40 CFR Tabla 302.4) (40 CFR 372.65)
Di髕ido de titanio NO NO NO
Acetona NO 5000 lbs RQ (2268 kg) NO
Xilenos (mezclados) NO 100 lbs RQ (45.4 kg) NO
Metiletilcetona NO 5000 lbs RQ (2268 kg) NO
Acetato de n-butilo NO 5000 lbs RQ (2268 kg) NO
Nafta VM y P NO NO NO
Alcohol de n-butilo NO 5000 lbs RQ (2268 kg) NO
Eter dimet韑ico NO NO NO
SECCION 311/312 DE LA LEY SARA DE EE.UU. PARA EL PRODUCTO: Da駉s agudos a la salud, da駉s cr髇icos a la salud,
inflamable.
ESTADO DEL INVENTARIO DE TSCA DE EE.UU.: Los componentes de este producto figuran en el Inventario de la TSCA (Ley para
el Control de Sustancias T髕icas).
OTRAS NORMAS FEDERALES DE EE.UU.: No corresponde.
LEY DEL AGUA POTABLE SEGURA Y CONTROL DE SUSTANCIAS TOXICAS DE CALIFORNIA (PROPOSICION 65):
Ninguna de las sustancias qu韒icas que componen este producto figuran en la Proposici髇 65.
P醙ina 17 de 19
ETIQUETADO: Cumple con GHS
ELIGRO! AEROSOL Y VAPORES EXTREMADAMENTE INFLAMABLES. TOXICO SI SE LO INGIERE. TOXICO PARA LA
VIDA ACUATICA EL USO INCORRECTO POR CONCENTRACION E INHALACION DELIBERADAS DE LOS CONTENIDOS
DE ESTE PRODUCTO PUEDE RESULTAR TOXICO O MORTAL. ENVASADO A PRESION. PUEDE EXPLOTAR SI SE LO
CALIENTA.
PRECAUCIONES PARA LA ETIQUETA ESTABLECIDAS POR EL ANSI:
No respire los gases, polvos, vapores o roc韔. No trague ni ingiera el producto. No debe entrar en contacto con los ojos, la piel o la
ropa. Mantenga el envase alejado de fuentes de calor, chispas y llamas. L醰ese bien despu閟 de usar. Mantenga el envase cerrado.
Uselo s髄o en 醨eas bien ventiladas. No perfore ni incinere el envase. No exponga al calor ni almacene a temperaturas superiores a 120
癋 (49 癈).
RIESGOS AMBIENTALES: No vierta los residuos de este producto en arroyos, lagunas, estuarios, oc閍nos ni otras aguas, a menos que
cumpla con los requisitos permitidos por el Sistema Nacional para la Eliminaci髇 de Descargas de Contaminantes (National Pollutant
Discharge Elimination System, NPDES) y que la autoridad competente haya sido notificada por escrito previo a la descarga. No
descargue aguas residuales con este producto en las redes cloacales sin notificar previamente a la autoridad de la planta depuradora de
aguas residuales de su localidad. Comun韖uese con la Junta de Control de la Calidad del Agua (State Water Board) o con la oficina
regional de la EPA para recibir orientaci髇.
NORMAS ADICIONALES DE CANADA:
ESTADO DEL INVENTARIO DSL/NDSL CANADIENSE: Los componentes de este producto figuran en el Inventario DSL.
SIMBOLOS DEL WHMIS CANADIENSE: A - Gas comprimido
B2 - Material inflamable y combustible - L韖uido inflamable
D2A - Material t髕ico e infeccioso Otros efectos Muy t髕ico
D2B - Material t髕ico e infeccioso Otros efectos T髕ico
Este producto ha sido clasificado de acuerdo con los criterios de peligros de las Normas Canadienses para Productos Controlados
(CPR), y la MSDS contiene toda la informaci髇 requerida por las CPR.
16. OTRA INFORMACION
PREPARADO POR: ADVANCED CHEMICAL SAFETY, Inc.
7563 Convoy Court
San Diego, CA 92111, EE.UU.
(858)-874-5577
FECHA DE IMPRESION 9 de febrero de 2007
DEFINICIONES DE TERMINOS
En una MSDS aparecen muchas abreviaturas y acr髇imos. Entre los de uso com鷑 se incluyen los siguientes:
N?CAS: Este es el n鷐ero de Servicio Abstracto Qu韒ico (Chemical Abstract Service) que identifica en forma exclusiva a cada compuesto.
ACGIH - Conferencia Americana de Higienistas Gubernamentales Industriales valor de exposici髇 significa exactamente lo mismo que el TLV, excepto que
(American Conference of Governmental Industrial Hygienists), una asociaci髇 OSHA exige el cumplimiento del mismo. Los L韒ites de Exposici髇 Permitidos
profesional que establece l韒ites de exposici髇. establecidos por OSHA se basan en los PEL de 1989 y en la Norma sobre
TLV - Valor del L韒ite del Umbral (Threshold Limit Value) - una Contaminantes del Aire de junio de 1993 ( June, 1993 Air Contaminants Rule)
concentraci髇 de una sustancia en el aire que representa las condiciones bajo las (Registro Federal: 58: 35338-35351 y 58: 40191). Se indican los PEL actuales y
cuales generalmente se considera que casi todos los trabajadores pueden los anulados. La frase PEL de 1989 anulado se coloca junto al PEL que fue
exponerse en forma reiterada sin sufrir efectos adversos. La duraci髇 debe anulado por orden judicial.
considerarse, incluido el Promedio Ponderado sobre Tiempo (TWA) de 8 horas, IDLH - Inmediatamente Peligroso para la Vida y la Salud (Immediately
el L韒ite de Exposici髇 de Corto Plazo de 15 minutos y el Nivel de L韒ite Dangerous to Life and Health) - Este nivel representa una concentraci髇 que
Instant醤eo (C). Tambi閚 deben tenerse en cuenta los da駉s producidos por la puede soportarse sin sufrir lesiones permanentes o producidas al evitar la fuga
absorci髇 a trav閟 de la piel. dentro de un per韔do de 30 minutos. El DFG - MAK se refiere al Nivel de
OSHA - Administraci髇 de Salud y Seguridad Ocupacional de EE.UU. (U.S. Exposici髇 M醲imo de la Rep鷅lica de Alemania (Republic of Germany s
Occupational Safety and Health Administration). Maximum Exposure Level), similar al PEL de EE.UU. NIOSH es el Instituto
PEL - L韒ite de Exposici髇 Permitido (Permissible Exposure Limit) - Este Nacional de Salud y Seguridad Ocupacional (National Institute of Occupational
P醙ina 18 de 19
Safety and Health), brazo de investigaci髇 de la Administraci髇 de Salud y LIMITES DE INFLAMABILIDAD EN EL AIRE:
Seguridad Ocupacional (OSHA). El NIOSH dicta las pautas de exposici髇 Gran parte de la informaci髇 sobre fuego y explosi髇 se obtiene de la
denominadas L韒ites Recomendados de Exposici髇 (RELs). Cuando no se Asociaci髇 Nacional de Protecci髇 contra el Fuego (NFPA). Punto de
establecen pautas de exposici髇, se coloca NE para referencia. Inflamaci髇 - Temperatura m韓ima en la cual un l韖uido elimina vapores
suficientes para formar una mezcla inflamable con el aire. Temperatura de
NIVELES DE PELIGROSIDAD:
autoignici髇: La temperatura m韓ima requerida para iniciar la combusti髇 en el
SISTEMA DE IDENTIFICACION DE MATERIALES PELIGROSOS:
aire sin otra fuente de ignici髇. LEL - El menor porcentaje de vapor en el aire,
Peligro para la salud: 0 (peligro de exposici髇 agudo o cr髇ico m韓imo); 1
por volumen, que explotar?o se inflamar?ante la presencia de una fuente de
(peligro de exposici髇 agudo o cr髇ico leve); 2 (peligro de exposici髇 agudo
ignici髇. UEL - El mayor porcentaje de vapor en el aire, por volumen, que
moderado o cr髇ico importante); 3 (peligro de exposici髇 agudo grave; una sola
explotar?o se inflamar?ante la presencia de una fuente de ignici髇.
exposici髇 puede provocar lesiones permanentes y puede ser fatal); 4 (peligro de
exposici髇 agudo extremo; una sola exposici髇 puede ser fatal). Peligro de INFORMACION TOXICOLOGICA:
Inflamabilidad: 0 (peligro m韓imo); 1 (materiales que requieren un Se presentan los peligros posibles para la salud obtenidos de datos de humanos,
precalentamiento considerable antes de quemarse); 2 (l韖uidos o s髄idos de estudios sobre animales o de los resultados de estudios con compuestos
similares. Definiciones de algunos t閞minos utilizados en esta secci髇: LD50 -
combustibles; l韖uidos con un punto de inflamaci髇 de 38-93 C [100-200 F]);
Dosis Letal (s髄idos y l韖uidos) que mata al 50% de los animales expuestos;
3 (l韖uidos inflamables de clase IB e IC con puntos de inflamaci髇 por debajo de
LC50 - Concentraci髇 Letal (gases) que mata al 50% de los animales expuestos;
38 C [100 F]); 4 (l韖uidos inflamables clase IA con puntos de inflamaci髇 por
ppm - Concentraci髇 expresada en partes del material por millones de partes de
debajo de 23 C [73 F] y puntos de ebullici髇 por debajo de 38 C [100 F].
aire o agua; mg/m3 - Concentraci髇 expresada en peso de la sustancia por
Peligro de Reactividad: 0 (normalmente estable); 1 (material que puede volverse
volumen de aire; mg/kg - Cantidad de material, por peso, administrada a un
inestable a temperaturas elevadas o que puede reaccionar ligeramente con el
sujeto de prueba seg鷑 su peso corporal en kg. Otras medidas de toxicidad
agua); 2 (materiales inestables pero que no detonan o que pueden reaccionar
incluyen TDLo, la dosis m醩 baja que provoca un s韓toma, y TCLo, la
violentamente con el agua); 3 (materiales que pueden detonar cuando se inician
concentraci髇 m醩 baja que provoca un s韓toma; TDo, LDLo, LDo, TC, TCo,
o que pueden reaccionar en forma explosiva con el agua); 4 (materiales que
LCLo y LCo, la dosis (o concentraci髇) m醩 baja que provoca efectos t髕icos o
pueden detonar a temperaturas o presiones normales).
letales. BEI - Indices de Exposici髇 Biol骻icos, representan los niveles de
ASOCIACION NACIONAL DE PROTECCION CONTRA EL FUEGO:
determinantes que muy frecuentemente se observan en espec韒enes recogidos
Peligro para la salud: 0 (materiales que al exponerse al fuego no ofrecen peligro
de un trabajador sano con el mismo grado de exposici髇 a sustancias qu韒icas
m醩 all?del que representan los materiales combustibles comunes); 1 (materiales
que un trabajador expuesto a la inhalaci髇 del TLV. Informaci髇 ecol骻ica: EC
que al exponerse al fuego podr韆n provocar irritaci髇 o lesiones residuales
es el efecto de la concentraci髇 en agua.
menores); 2 (materiales que al exponerse al fuego en forma intensa o reiterada
podr韆n provocar incapacidad temporaria o posibles lesiones residuales); 3 Se utilizan datos de diversas fuentes para evaluar el potencial efecto cancer韌eno
(materiales que al exponerse al fuego por un corto per韔do podr韆n provocar de este material. Las fuentes y los niveles son: IARC - Agencia Internacional de
lesiones temporarias o residuales graves); 4 (materiales que al exponerse al Investigaci髇 sobre el C醤cer (International Agency for Research on Cancer); 1
fuego por un per韔do muy corto podr韆n provocar la muerte o lesiones residuales = carcin骻eno para humanos, 2A, 2B = probablemente carcin骻eno para
de importancia). Peligro de Inflamabilidad y Peligro de Reactividad: Rem韙ase a humanos, 3 = no clasificable para la carcinogenicidad en humanos y 4 =
las definiciones del Sistema de Identificaci髇 de Materiales Peligrosos . probablemente no carcin骻eno para humanos. NTP - Programa Nacional de
Toxicolog韆 (National Toxicology Program); K = se sabe que act鷄 como
carcin骻eno en humanos y R = la expectativa razonable es que sea carcin骻eno
para humanos. RTECS - Registro de Efectos T髕icos de las Sustancias
Qu韒icas (Registry of Toxic Effects of Chemical Substances). OSHA -
Administraci髇 de Salud y Seguridad Ocupacional (Occupational Safety and
Health Administration) y CAL/OSHA - subunidad de la Administraci髇 de
Salud y Seguridad Ocupacional de California; Ca = carcin骻eno definido sin
mayor categorizaci髇. ACGIH Conferencia Americana de Higienistas
Gubernamentales Industriales (American Conference of Governmental Industrial
Hygienists); A1 = carcin骻eno humano confirmado, A2 = carcin骻eno humano
sospechado, A3 = carcin骻eno animal confirmado sin relevancia conocida para
los humanos, A4 = no clasificable como carcin骻eno humano y A5 = no
sospechado como carcin骻eno humano. NIOSH Instituto Nacional para la
Salud y Seguridad Ocupacional de EE.UU. (U.S. National Institute for
Occupational Safety and Health); Ca = carcin骻eno ocupacional potencial, sin
mayor categorizaci髇. EPA Agencia de Protecci髇 Ambiental de EE.UU.
(U.S. Environmental Protection); A = carcin骻eno humano, B = probable
carcin骻eno humano, C = posible carcin骻eno humano, D = no clasificable para
la carcinogenicidad en humanos, E = evidencia de ausencia de carcinogenicidad
para humanos, K = Se conoce como carcin骻eno humano, L = es probable que
produzca c醤cer en humanos, CBD = no puede determinarse, NL = no es
probable que produzca c醤cer en humanos e I = los datos son insuficientes para
la evaluaci髇 del potencial carcinog閚ico en humanos.
INFORMACION SOBRE REGLAMENTACIONES:
Esta secci髇 explica el impacto de varias leyes y normas sobre el material. EPA
se refiere a la Agencia de protecci髇 Ambiental de EE.UU. (U.S. Environmental
Protection Agency). WHMIS denota el Sistema de Informaci髇 Canadiense
sobre Materiales Peligrosos en el Lugar de Trabajo (Canadian Workplace
Hazardous Materials Information System). DOT y TC se refieren al
Departamento de Transporte de EE.UU. (U.S. Department of Transportation) y
al Ministerio de Transporte de Canad?(Transport Canada), respectivamente. Ley
de Reautorizaci髇 y Enmiendas del Superfondo (Superfund Amendments and
Reauthorization Act, SARA); Lista de Sustancias Dom閟ticas/No Dom閟ticas de
Canad?(Canadian Domestic/Non-Domestic Substances List, DSL/NDSL); la
Ley de Control de Sustancias T髕icas de EE.UU. (U.S. Toxic Substance Control
Act, TSCA); estado del Contaminante Marino seg鷑 el DOT; la Ley de
Respuesta Ambiental Integral, Compensaci髇 y Responsabilidad
(Comprehensive Environmental Response, Compensation, and Liability Act,
CERCLA o Superfondo); y diversas normas estatales. Esta secci髇 tambi閚
incluye informaci髇 sobre las advertencias precautorias que aparecen en la
etiqueta del embalaje industrial del material.
This document was created with Win2PDF available at http://www.daneprairie.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
|