MATERIAL SAFETY DATA SHEET
American Schramlack, Inc.
Wilmington, DE 19808
Telephone
ChemTrec: 800-424-9300
Schramlack Aftermarket Replacement Binders
SR-10150 Basecoat Binder SR-1160 Basecoat Binder
SR-1155 Low Emission Basecoat Binder SR-1165 Low Emission Basecoat Binder
SR-1100 2K Binder SR-162320 Basecoat Binder
SR-162330 Basecoat Binder SR-152320 2K Binder
SR-152330 2K Binder SR-1150 Basecoat Binder
SR-10175 Basecoat Binder SR-17020 S/S Solid Color Binder
SR-17030 S/S Solid Color Balancer SR-17040 S/S Metallic Color Binder
SR-17050 S/S Metallic Color Balancer SR-2689 Basecoat Binder
SR-21689 Basecoat Binder SR-20695 Basecoat Balancer
SR-2649 Mixing Clear SR-2895 Color Blender
SR-2500 Color Blender
Section 1: Product Identification
Product Identification: Basecoat Binder
OSHA Hazard Class: Flammable Liquid
DOT Shipping Class: Paint Related Material UN1263
Hazardous Material Information: See Section 10
Section 2: Hazardous Ingredients
* Denotes 15-minutes / ** Denotes 10-minutes / (S) = Supplier / NE = Not Established
VAPOR
SARA 313
PRESSURE
CAS # INGREDIENT OSHA ACGIH STEL CEILING
20癈 REPORT
(MMHg)
No
N/E Acrylic Resin N/E N/A N/A N/A N/A
200 ppm**
Yes
1330-20-7 Xylene (Note A) 25.00 100 ppm 100 ppm 150 ppm
200 ppm*
No
123-86-4 N Butyl Acetate 8.40 150 ppm 150 ppm ----
No
64742-94-5 Aromatic Hydrocarbon Mixture 0.20 10 ppm 10 ppm 15 ppm ----
No ----
108-65-6 Methoxy Propyl Acetate 3.80 N/E N/E N/E
No ----
628-63-7 Amyl Acetate 4.00 10 ppm 10 ppm 15 ppm
50 ppm
No
71-36-3 nButyl Alcohol 4.39 100 ppm 50 ppm ---
skin*
1000 ppm*
No
67-64-1 Acetone 181.00 750 ppm 750 ppm ----
No ----
110-43-0 Methyl Amyl Ketone 2.10 100ppm 100 ppm 50 ppm
Yes
78-93-3 Methyl Ethyl Ketone 83.0 200 ppm 200 ppm 300 ppm
No
141-78-96 Ethyl Acetate 76.0 400 ppm 400 ppm ---- ----
Note A: Technical grade Xylene contains 18-20% Ethylbenzene (100-41-4), which has 100 ppm PEL, 100 ppm TLV, 125 ppm STEL, and is subject to
the reporting requirements of Section 313 of Sara Title III.
See Section 10 for specific ingredients and SARA 313 reportable wt. % data.
Page 1 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
Section 3: Physical Data
Boiling Range: 248癋 ?344癋 Evaporation Rate: Slower than Ether
Solubility in H2O: Slightly Miscible ?Miscible Vapor Density: Heavier than Air
Volatile (%) by Volume: 56. ?89.0% Volatile % by Weight: 52.0 ?86.0%
Weight Per Gallon: 7.6 ?8.4 lbs/gallon
Section 4: Fire and Explosion Hazard Data
Flash Point: See Section 10
Flammable Limits: 0.8% - 13.0%
Extinguishing Media:
Water Spray (for Containment), Foam, Carbon Dioxide, Dry Chemical.
Special Fire Fighting Procedures: Full protective equipment, including self-contained breathing apparatus, is
recommended. Water from fogging nozzles may be used to cool closed containers to prevent pressure build up
preventing rupturing. Do not use direct water stream on combustible or flammable liquid fires.
Unusual Fire and Explosion Hazards: When heated above the defined flash points, these solvents emit flammable
vapors, which when mixed with air, can burn or be explosive when exposed to any ignition source. Fine mists or spray
may be flammable at temperatures below the flash point.
Section 5: Health Hazards Data
General Effects:
If Ingested:
Gastrointestinal distress. In the unlikely event of ingestion, call a physician immediately and have the names of the
ingredients available.
If Inhaled:
May cause nose ant throat irritation. Repeated and prolonged overexposure to solvents may lead to permanent brain and
nervous system damage. Eye watering, headaches, nausea, dizziness and loss of coordination are signs that solvent
levels are too high. Exposure to isocyanates may cause respiratory sensitization. This effect may be permanent. This
effect may be delayed for several hours after exposure. Repeated overexposure to isocyanates may cause a decrease in
lung function, which may be permanent. Individuals with breathing problems or prior reaction to isocyanates must not be
exposed to vapors or spray mist of this product. If affected by inhalation of vapor or spray mist, remove to fresh air. If
breathing difficulty persists, or occurs later, consult a physician.
If Skin or Eye Contact:
May cause irritation or burning of the eyes. Repeated or prolonged liquid contact may cause skin irritation with discomfort
and dermatitis. In case of eye contact, immediately flush with plenty of water for at least 15-minutes; call a physician. In
case of skin contact, wash with soap and water. If irritation occurs, contact a physician.
Specific Effects:
Ethyl Benzene: (Contributed from Xylene) Moderate toxicity by irritation to the skin, eyes, mucous membranes and by
ingestion and inhalation routes. The International Agency for Research on Cancer (IARC) has evaluated ethylbenzene
and classified it as a possible human carcinogen (Group 2B) based on sufficient evidence for carcinogenicity in
experimental animals, but inadequate evidence for cancer in exposed humans.
nButyl Alcohol: May cause chemical burns to eyes. May cause abnormal blood forming function with anemia.
Reoccurring overexposure may result in liver and kidney injury.
Xylene: High concentrations have caused embryo toxic effects in laboratory animals. Reoccurring overexposure may
cause liver or kidney damage. Can be absorbed through the skin in harmful amounts.
nButyl Acetate: May cause abnormal liver function.
Aromatic Hydrocarbons, Solvent 100, VMP Napthas, Lt. Aliphatic Naptha & Mineral Spirits: Laboratory studies with
rats have shown that petroleum distillates cause kidney damage and kidney or liver tumors. These effects were not seen
in similar studies with guinea pigs, dogs or monkeys. Several studies evaluating petroleum workers have not shown a
significant increase lf kidney damage or an increase in liver tumors.
Methoxy Propyl Acetate: May cause moderate eye burning. Continuous re-over exposures may result in liver and
kidney injury.
Amyl Acetate: May cause abnormal liver function.
Acetone: can cause dermatitis.
Butyl Acetate: May cause abnormal liver function.
Methyl Amyl Ketone: Ingestion studies on laboratory animals showed that high oral doses caused increased liver and
kidney weights.
Methyl Ethyl Ketone: High concentrations have caused embryo toxic effects in laboratory animals. Liquid splashed in
the eyes may result in chemical burns.
Page 2 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
Methoxy Propyl Acetate: May cause moderate eye burning. Continuous re-over exposure may result in liver and kidney
injury.
Methoxy Propyl Acetate: May cause moderate eye burning. Continuous re-over exposure may result in liver and kidney
injury.
Ethyl Acetate: Prolonged and repeated high exposure of laboratory animals resulted in secondary anemia with increase
in white blood cells.
Section 6: Reactivity Data
Stability: Stable
Incompatibility (Materials to Avoid): None reasonably foreseeable.
Hazardous Decomposition Products: CO, CO2, Smoke
Hazardous Polymerization: Will not occur.
Section 7: Spill or Leak Procedures
Steps to be taken in case material is released or spilled:
Ventilate area. Remove sources of ignition. Prevent skin contact and breathing of vapor. Wear a properly fitted
vapor/particulate respirator (NIOSH/MSHA TC-23C). Confine and remove with inert absorbent.
Waste Disposal Method:
Do not allow material to contaminate ground water systems. Incinerate absorbed material in accordance with federal,
state and local requirements. Don not incinerate in closed containers.
Section 8: Special Protection Information
Respiratory:
Do not breathe vapors or mists. Wear a positive pressure supplied air respirator (NIOSH/MSHA TC-19C) or equivalent
while mixing activator with any paint or clear, during application and until all vapors and spray mists are exhausted.
Individuals with a history of lung or bre3athing problems or prior reaction to isocyanates should not use or be exposed to
this product. Do not permit anyone without protection in the painting area. Follow the respirator manufacturer's directions
for respirator use.
Ventilation:
Provide sufficient ventilation in volume and pattern to keep contaminants below applicable OSHA requirements.
Protective Clothing:
Neoprene gloves and coveralls are recommended.
Eye Protection:
Desirable in all industrial situations. Include splashguards or side shields.
Section 9: Special Precautions
Precautions to be taken in handling and storing:
Observe label precautions. Keep away from heat, sparks and flame. Close container after each use. Ground containers
when pouring. Wash all exposed areas thoroughly after handling and before eating or smoking. Do not store above
120癋.
Other Precautions:
Do not sand, flame cut, braze or weld dry coating without a NIOSH/MSHA approved respirator or appropriate ventilation.
Section 10: Other Information Product Specifications
For each product part number and chemical listed below, the chemicals that have weight percentages in parenthesis are
subject to the reporting requirements of Section 313 of the Emergency Planning and Right-To-Know Act of 1986 and 40
CFR 372.
SR-10150 Basecoat Binder
Acrylic Resins, nButyl Acetate, Xylene (22%), Aromatic Hydrocarbon Mixture, nButyl Alcohol, Methoxy Propyl Acetate and
Amyl Acetate.
Gallon Weight: 7.49 lbs Flash Point: 0癋
Wt % Solids: 14.3 Material VOC: 6.44 lbs/gallon
Vol. % Solids: 10.9 Coating VOC: 6.44 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.23 lbs/gallon
Page 3 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
SR-10160 Basecoat Binder
Acrylic Resins, nButyl Acetate, Xylene (21%), Aromatic Hydrocarbon Mixture, nButyl Alcohol, Methoxy Propyl Acetate and
Amyl Acetate.
Gallon Weight: 7.61 lbs Flash Point: 0癋
Wt % Solids: 20.69 Material VOC: 6.03 lbs/gallon
Vol. % Solids: 16.3.5 Coating VOC: 6.03 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21 lbs/gallon
SR-1155 Low Emission Basecoat Binder
Acrylic Resins, nButyl Acetate, Xylene (22%), Aromatic Hydrocarbon Mixture, nButyl Alcohol, Methoxy Propyl Acetate and
Amyl Acetate.
Gallon Weight: 7.60 lbs Flash Point: 0癋
Wt % Solids: 20.69 Material VOC: 6.03 lbs/gallon
Vol. % Solids: 16.35 Coating VOC: 6.03 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.23 lbs/gallon
SR-1165 Low EMISSION Basecoat Binder
Acrylic Resins, nButyl Acetate, Xylene (16%), Aromatic Hydrocarbon Mixture, nButyl Alcohol, Methoxy Propyl Acetate and
Amyl Acetate.
Gallon Weight: 7.61 lbs Flash Point: 0癋
Wt % Solids: 20.69 Material VOC: 6.03 lbs/gallon
Vol. % Solids: 16.35 Coating VOC: 6.03 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21 lbs/gallon
SR-1100 2K Binder
Acrylic Resins, nButyl Acetate, Xylene (12%), Aromatic Hydrocarbon Mixture, Methoxy Propyl Acetate and Amyl Acetate.
Gallon Weight: 8.16 lbs Flash Point: 0癋
Wt % Solids: 53.69 Material VOC: 4.39 lbs/gallon
Vol. % Solids: 46.40 Coating VOC: 4.39 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.56 lbs/gallon
SR-162320 Basecoat Binder
Resins, Acetone, nButyl Acetate, Xylene (21%).
Gallon Weight: 7.42 lbs Flash Point: 20癋
Wt % Solids: 13.76 Material VOC: 6.4 lbs/gallon
Vol. % Solids: 11.10 Coating VOC: 5.5 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21 lbs/gallon
SR-162330 Basecoat Binder
Resins, Acetone, nButyl Acetate, Xylene (21%).
Gallon Weight: 7.57 lbs Flash Point: 20癋
Wt % Solids: 21.80 Material VOC: 5.8lbs/gallon
Vol. % Solids: 17.45 Coating VOC: 5.0lbs/gallon
OSHA Storage: 1B Solvent Density: 7.181 lbs/gallon
SR-152320 2K Binder
Resins, Methoxy Propyl Acetate, Ethyl Acetate, MAK, MEK, Xylene (2%).
Gallon Weight: 7.98lbs Flash Point: 73癋
Wt % Solids: 52.24 Material VOC: 3.8 lbs/gallon
Vol. % Solids: 44.99 Coating VOC: 3.8 lbs/gallon
OSHA Storage: 1B Solvent Density: 6.94lbs/gallon
Page 4 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
SR-152330 2K Binder
Resins, Xylene (2%), Methoxy Propyl Acetate, MAK, MEK.
Gallon Weight: 7.91 lbs Flash Point: 73癋
Wt % Solids: 46.02 Material VOC: 4.3 lbs/gallon
Vol. % Solids: 38.69 Coating VOC: 4.3 lbs/gallon
OSHA Storage: 1B Solvent Density: 6.97 lbs/gallon
SR-2689 Basecoat Binder
Resins, Xylene (8%),nButyl Acetate, nButyl Alcohol.
Gallon Weight: 7.84 lbs Flash Point: 20癋
Wt % Solids: 25.4 Material VOC: 5.8 lbs/gallon
Vol. % Solids: 18.9 Coating VOC: 5.8 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21 lbs/gallon
SR-21689 Basecoat Binder
Resins, Xylene (9%),nButyl Acetate, nButyl Alcohol.
Gallon Weight: 7.84 lbs Flash Point: 20癋
Wt % Solids: 25.5 Material VOC: 5.7 lbs/gallon
Vol. % Solids: 19.1 Coating VOC: 5.7 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21 lbs/gallon
SR-2695 Basecoat Binder
Resins, Xylene (20%), nButyl Acetate, Methoxy Propyl Acetate, MEK, Acetone, Butyl Alcohol.
Gallon Weight: 8.06 lbs Flash Point: 20癋
Wt % Solids: 40.9 Material VOC: 4.71lbs/gallon
Vol. % Solids: 32.4 Coating VOC: 4.42 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.13 lbs/gallon
SR-2649 Mixing Clear
Resins, Xylene (10%), nButyl Acetate, Methoxy Propyl Acetate.
Gallon Weight: 8.06 lbs Flash Point: 20癋
Wt % Solids: 54.0 Material VOC: 4.46 lbs/gallon
Vol. % Solids: 39.2 Coating VOC: 4.46 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.34 lbs/gallon
SR-2895 Color Blender
Resins, Xylene (12%), nButyl Acetate, Methoxy Propyl Acetate.
Gallon Weight: 7.74 lbs Flash Point: 20癋
Wt % Solids: 23.1 Material VOC: 5.95 lbs/gallon
Vol. % Solids: 18.1 Coating VOC: 5.95 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.26 lbs/gallon
SR-2500 Color Blender
Resins, Xylene (12%), nButyl Acetate, Methoxy Propyl Acetate.
Gallon Weight: 7.73 lbs Flash Point: 20癋
Wt % Solids: 23.0 Material VOC: 5.94 lbs/gallon
Vol. % Solids: 18.0 Coating VOC: 5.94 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.26 lbs/gallon
SR-1150 Basecoat Binder
Acrylic Resins, Acetone, nButyl Acetate, isopropyl alcohol, Toluene(30-32%) Xylene (12-14%).
Gallon Weight: 7.29 lbs Flash Point: 20癋
Page 5 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
Wt % Solids: 9.7 Material VOC: 6.6 lbs/gallon
Vol. % Solids: 7.5 Coating VOC: 5.2 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.13 lbs/gallon
SR-1175 Basecoat Binder
Acrylic Resins, Acetone, nButyl Acetate, Methyl Ethyl Ketone, Toluene(26-28%) Xylene (4-5%).
Gallon Weight: 7.68 lbs Flash Point: 20癋
Wt % Solids: 31.2 Material VOC: 5.0 lbs/gallon
Vol. % Solids: 25.5 Coating VOC: 4.2 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.09 lbs/gallon
SR-17020 S/S Solid Color Binder
Resins, Aromatic Hydrocarbon Mixture, nButyl Acetate, MAK, Methoxy Propyl Acetate, Ethyl Acetate, MEK, Xylene (11-
14%).
Gallon Weight: 8.00lbs Flash Point: 20癋
Wt % Solids: 45.53 Material VOC: 4.4 lbs/gallon
Vol. % Solids: 39.72 Coating VOC: 4.4 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21lbs/gallon
SR-17030 S/S Solid Color Balancer
Resins, Aromatic Hydrocarbon Mixture, nButyl Acetate, MAK, Methoxy Propyl Acetate, Ethyl Acetate, MEK, Xylene (11-
14%).
Gallon Weight: 8.00lbs Flash Point: 20癋
Wt % Solids: 41.53 Material VOC: 4.7 lbs/gallon
Vol. % Solids: 35.72 Coating VOC: 4.7 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.21lbs/gallon
SR-17040 S/S Metallic Color Binder
Resins, Aromatic Hydrocarbon Mixture, nButyl Acetate, MAK, Methoxy Propyl Acetate, Ethyl Acetate, MEK, Xylene (12-
15%).
Gallon Weight: 7.98lbs Flash Point: 20癋
Wt % Solids: 46.14 Material VOC: 4.3 lbs/gallon
Vol. % Solids: 39.72 Coating VOC: 4.3 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.14lbs/gallon
SR-17050 S/S Metallic Color Balancer
Resins, Aromatic Hydrocarbon Mixture, nButyl Acetate, MAK, Methoxy Propyl Acetate, Ethyl Acetate, MEK, Xylene (12-
15%).
Gallon Weight: 7.96lbs Flash Point: 20癋
Wt % Solids: 46.1 Material VOC: 4.3 lbs/gallon
Vol. % Solids: 39.8 Coating VOC: 4.3 lbs/gallon
OSHA Storage: 1B Solvent Density: 7.19lbs/gallon
Xylene: When present, it can be assumed 18-20% of the weight % reported is Ethylbenzene.
Flash Point: Determined by TCC, expressed in degrees Fahrenheit.
Coating VOC: Ws ?Ww ?Wex ?Vt ?Vw ?Vex Represents VOC per EPA Method 24.
Material VOC: Ws ?Ww ?Wex
Where: Ws = total solvent weight Vex = Volume of exempt solvent
Ww = weight of water Vw = volume of water
Wex = weight of exempt solvent Vt = total volume
Page 5 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
WARNING: KEEP THIS AND ALL PAINT RELATED PRODUCTS OUT OF THE REACH OF CHOLDREN!
The information contained in this MSDS is based on data from sources considered to be reliable but American
Schramlack, Inc. does not guarantee the accuracy or completeness thereof. American Schramlack, Inc. urges each
customer or recipient of this MSDS to study it carefully to become aware of and understand the hazards associated with
this product. The reader should consider consulting reference works or individuals who are experts in ventilation,
toxicology or fire prevention as necessary or appropriate to use and understand the data in this MSDS
Note: The data on this MSDS relates only to individual components and does not represent the end mixed product.
Read all other component Material Safety Data Sheets.
Distributed by: American Schramlack, Inc. Wilmington, DE, 19808. www.schramlack.com.
END OF MSDS.
Page 6 of 6 American Schramlack, Inc. ?Schramlack Binders MSDS Revised 6/25/04
|