Material Safety
Data Sheet
Pinnacle West Enterprises
Distributor Information
HMIS Ratings
PO Box 2691
Health 3
Sumas, WA 98295-
Flammability 1
Phone Emergency Reactivity 0
1-800-424-9300
Protection X
Phone 1-800-424-9300
(CHEMTREC)
FOR INTERNATIONAL CALLS
703-527-3887
2002-Mar-29
Date Prepared
1. Chemical Product and Company Identification
Product Identity All-Solve
J001
Product Code Number
Polyurethane Remover
Product Use Version #
1.0
CAS#
Mixture
2. Composition / Information on Ingredients
Ingredient Name CAS Number Wgt. % PEL-OSHA Exposure Limits TLV-ACGIH Carcinogen
2-PYRROLIDINONE, 1-METHYL- 872-50-4 40 -70 Not Established Not Established No
2(3H)-FURANONE, DIHYDRO- 96-48-0 10 -30 Not Established Not Established No
ETHANOL, 2-PHENOXY- 122-99-6 10 -30 Not Established Not Established No
PROPANOL, 25498-49-1 5- 10 Not Established Not Established No
[2-(2-METHOXYMETHYLETHOXY)METh
3. Hazards Identification
Potential Health Effects
Skin
Eyes
Inhalation Ingestion
Prolonged and/or repeated skin contact with this product may cause irritation/dermatitis.
This product may cause irritation to the eyes. High concentration of product vapors can cause severe irritation of eyes.
Exposure to oil mist/fume/vapor may cause respiratory tract irritation. Excessive inhalation of this product may cause
headache, dizziness, blurred vision, nausea and vomiting.
Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Hazard Statements
CAUTION: EYE AND SKIN IRRITANT.
Material Name ALL-SOLVE Print Date 02/18/05
Material Safety
Data Sheet
4. First Aid Measures
First Aid
For skin contact flush with large amounts of water while removing contaminated clothing. Wash
Skin contaminated clothing before reuse. If irritation persists, get medical attention.
Flush immediately with water for at least 15 minutes. Do not rub eyes. If irritation persists get
Eyes
medical attention.
If inhalation of gas/fume/vapor/dust/mist from the material is excessive (air concentration is
Inhalation
greater than the TLV or health effects are noticed), Immediately remove the affected person to
fresh air. If symptoms persist, get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Call a physician
immediately.
Ingestion
5. Fire Fighting Measures
Hazardous Combustion Products
Irritating and/or toxic gases may be emitted upon lha products decomposition.
Extinguishing Media Dry chemical (preferred), alcohol foam, water. Use water to cool fire-exposed containers and to protect personnel.
Fire Fighting Equipment/Instructions
Firefighters should wear full protective clothing Including self contained breathing apparatus.
Flash Point 99 癈 (21CTF) CC
6. Accidental Release Measures
Containment Procedures
Dike the spilled material, where this is possible- Absorb with inert absorbent such as dry clay, sand or diatomaceous earth, commercial
absorbents, or recover using pumps.
Clean-Up Procedures
Absorb spill with inert material- Shovel material into appropriate container for disposal.
7. Handling and Storage
Handling Procedures
As with all chemicals, good industrial hygiene practices should be followed when handling this material. Avoid getting this material into contact with
your skin and eyes.
Storage Procedures
Keep the container tightly closed and in a cool, well-ventilated place.
Material Name ALL-SOLVE Print Date 02/18/05
Material Safety
Data Sheet
8. Exposure Controls / Personal Protection
Engineering Controls
Use general ventilation and use local exhaust, where possible, in confined or enclosed spaces. Provide adequate local exhaust ventilation to
maintain worker exposure below exposure limits.
Personal Protective Equipment
Eyes/Face
Wear safety glasses; chemical goggles (if splashing is possible).
Skin
Use impervious gloves. Use of impervious apron and boots are recommended where splashing of the chemical is likely.
Respiratory
Respiratory protection not normally required for ambient air concentrations not exceeding the Occupational Exposure Limit. If ventilation
is not sufficient to effectively prevent buildup of vapors, appropriate NIOSH/MSHA respiratory protection must be provided
General
Eye wash fountain and emergency showers are recommended. Use good industrial hygiene practices in handling this material.
9. Physical & Chemical Properties
Boiling Point > 200 癈
Specific Gravity 1.06
Vapor Pressure < 1 mm Hg
Solubility (H20) complete VOC
8.76 Ib/gal
10. Chemical Stability & Reactivity Information
Chemical Stability
Stable under normal conditions.
Hazardous Decomposition
None known. Irritating and/or toxic fumes and gases may be emitted upon the products decomposition.
Hazardous Polymerization
Will not occur.
Incompatibility
Strong oxidizing agents (peroxides, chlorine, strong acids).
11. Toxicological Information
Toxicological Information
No data available for this product.
Material Name ALL-SOLVE Print Date 02/18/05
Material Safety
Data Sheet
12. Ecological Information
Ecological Information
No data available for this product.
Environmental Effects
No data available for this product.
13. Disposal Considerations
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
14. Transportation Information
General
This product is not regulated as a hazardous material by the United States (DOT) or Canadian (TDG) transportation regulations.
US DOT HMR Information
Proper Shipping Name Not Regulated
15. Regulatory Information
US Federal Regulations
All components are on the U.S. EPA TSCA Inventory List.
CERCLA/SARA - Section 313 - Emission Reporting
2-PYRROLIDINONE, 1-METHYL-
State Regulations
Other state regulations may apply. Check individual state requirements.
16. Other Information
Disclaimer
NOTICE: The information presented herein is based on data considered to be accurate as of the date of preparation of this Material
Safety Data Sheet. However, MSDS may not be used as a commercial specification sheet of manufacturer or seller, and no warranty or
representation, expressed or implied, is made as to the accuracy or comprehensiveness of the foregoing data and safety information, nor
is any authorization given or implied to practice any patented invention without a license. In addition, no responsibility can be assumed by
vendor for any damage or injury resulting from abnormal use, from any failure to adhere to recommended practices, or from any hazards
inherent in the nature of the product.
Prepared By: Technical Department
Issue Date: 18-Feb-05
Material Name ALL-SOLVE Print Date 02/18/05
|