MATERIAL SAFETY DATA SHEET
Page 1 of 3
Product Name: Eco-Tuff Industrial Coating Product Code: ET2-6030-25
Emergency Phone #: 1(877)366-7547 MSDS #: MSDS.ET2.0409.2
Eco Safety Products Health 1
2921 W. Culver Street, #4B
Fire 0
Phoenix, Arizona 85009 U.S.A.
www.ecoprocote.com Reactivity 0
T: (602)305-9397 F: (602)305-6431
Protection
I. Identification
Chemical Name: Eco-Tuff Industrial Coating
Chemical Family: W.B. Acrylic-Urethane
Chemical Formula: Trade Secret
DOT Information: Not Regulated.
Notes: No known chemical compounds listed as carcinogens under OSHA, ACGIH, NTP, IARC, California
Prop 65, or Other.
II. Composition Information on Ingredients
Designation % CAS # PEL(PPM) TLV(PPM) NIOSH REL
Acrylic-Urethane Mixture 31-60% Proprietary Mixture Not Listed Not Listed Not Listed
Water 31-60% 7732-18-5 Not Listed Not Listed Not Listed
N-Methyl Pyrrolidone .25-.50% 872-50-4 Not Listed Not Listed Not Listed
Triethylamine .25-.50% 121-44-8 25 ppm (100 25 ppm (100 Not Listed
mg/m3) mg/m3)
Pigments & Plasticizers 1-9%
Thickeners 1-9%
III. Hazards Identification
SPECIAL NOTE: MSDS data pertains to the product as dispensed from the container. Adverse health effects would not be
expected under recommended conditions of use so long as prescribed safety precautions are practiced.
ACUTE EFFECTS OF OVEREXPOSURE: This product may be an eye and skin irritant. Contact with eye tissue may produce
pain, watering, and/or burning sensation. Prolonged skin contact may irritate the skin. Ingestion of an excessive amount of the
product may cause complications.
Eye Contact: Keep product out of eyes.
Skin Contact: Mild skin irritation is possible.
Inhalation: No known effects on inhalation, however, avoid inhalation.
Ingestion: Do not ingest. May result in abdominal discomfort, nausea, and diarrhea.
IV. First Aid Measures
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation develops, consult a physician.
Skin Contact: Flush contaminated skin with plenty of water. Consult a physician if irritation develops.
Inhalation: Move exposed person to fresh air. If irritation persists, get medical attention promptly.
Ingestion: Do not induce vomiting. If victim is conscious give plenty of water or milk to drink. Get medical attention
immediately.
MATERIAL SAFETY DATA SHEET
Page 2 of 3
Product Name: Eco-Tuff Industrial Coating Product Code: ET2-6030-25
Emergency Phone #: 1(877)366-7547 MSDS #: MSDS.ET2.0409.2
Eco Safety Products Health 1
2921 W. Culver Street, #4B
Fire 0
Phoenix, Arizona 85009 U.S.A.
www.ecoprocote.com Reactivity 0
T: (602)305-9397 F: (602)305-6431
Protection
V. Fire Fighting Measures
Flammable Limits: Not determined.
Flash Point: Not combustible.
Extinguishing Media: Dry chemical, foam, or water fog.
Firefighting Procedures: For precaution use self contained breathing apparatus.
Fire and Explosion Hazards: No unusual hazards are expected.
VI. Accidental Release Measures
May be slippery when wet. Use caution during cleanup. Squeegee or broom spilled material and dispose in accordance with all
local, state and federal regulations. Spills may be absorbed by an absorbent material and dispose as solid waste according to your
local, state and federal regulations.
VII. Handling and Storage
Store material in a cool, dry and well ventilated area Keep containers closed and air tight. Do not freeze.
VIII. Exposure Controls and Personal Protection
Ventilation: General local ventilation, no special precautions.
Eye Protection: Wear safety goggles.
Gloves: Wear protective gloves to avoid possible skin irritation.
Clothing: Wash clothing after use.
Wash Requirements: Wash with soap and water.
Respirator: None required. Wear protective mask if spraying material and mist exceeds acceptable levels.
IV. Physical and Chemical Characteristics
Boiling Point: >212篎 Vapor Pressure (mm Hg): (20癈 KPA)2.36
Vapor Density (Air = 1): <1 Solubility in Water: Soluble
Specific Gravity (H2O = 1): 1.05 Melting Point: N/A
Evaporation Rate (H2O = 1): <1 Appearance: Clear Liquid
Odor: Mild Freezing Point: 15 - 20癋
V.O.C. Content: 0 g/l Auto Ignition: No
X. Stability and Reactivity
Stability: Stable
Conditions to Avoid: None known
Hazardous Decomposition: None known
Hazardous Polymerization: None known
MATERIAL SAFETY DATA SHEET
Page 3 of 3
Product Name: Eco-Tuff Industrial Coating Product Code: ET2-6030-25
Emergency Phone #: 1(877)366-7547 MSDS #: MSDS.ET2.0409.2
Eco Safety Products Health 1
2921 W. Culver Street, #4B
Fire 0
Phoenix, Arizona 85009 U.S.A.
www.ecoprocote.com Reactivity 0
T: (602)305-9397 F: (602)305-6431
Protection
XI. Toxicological Information
Route of Entry: Inhalation. Skin. Eyes.
Toxicological: Eye irritant. This product does not contain any ingredient designated by IARC, NTP, ACGIH, or
OSHA, as probable or suspected human carcinogens
XII. Ecological Information
Aquatic toxicity rating not determined. All possible measures should be taken to prevent release into the environment.
XIII. Disposal Information
Disposal of product must be in accordance with all federal, state, and local regulations.
XIV. Transport Information
Not Regulated
XV. Regulatory Information
Toxic Substances Control Act (TSCA): All applicable ingredients are on the TSCA inventory list.
OSHA Hazard Communication Standard (29 CFR 1910.1200): None
California Prop 65: This product contains small amounts of N-Methyl Pyrrolidone, a substance known to the State of California to
cause developmental and reproductive toxicity.
Hazard Category Under SARA (Title III): None
Status under the Federal Hazardous Substances Act: None
International Regulations: Consult the regulations of the applicable country of import.
XVI. Other Information
THE INFORMATION GIVEN AND RECOMMENDATIONS MADE HEREIN APPLY TO OUR PRODUCT ALONE AND
ARE NOT COMBINED WITH OTHER PRODUCTS. ALL SUCH INFORMATION IS BELIEVED TO BE TRUE AND
ACCURATE TO THE BEST OF OUR KNOWLEDGE. IT IS THE PURCHASER'S RESPONSIBILITY BEFORE USING ANY
PRODUCT TO VERIFY THE OPERATING CONDITIONS AND TO DETERMINE WHETHER THE PRODUCT IS
SUITABLE FOR THEIR PURPOSES.
|