MATERIAL SAFETY DATA SHEET
ANCHOR BOND ACTIVATOR
Product:
Code: BDAB 380/150 Date of Issue: September 2003 Version: 1
1. PREPARATION AND COMPANY IDENTIFICATION:
Preparation Trade Name: BOND IT ANCHOR BOND ACTIVATOR
Bond It
Supplier:
Address: Sherwood House, Huntingdon Road, Brighouse, West Yorkshire. HD6 1PZ, ENGLAND.
Telephone: (+44) 01484 727400
Emergency: As Above
2. COMPOSITION/ INFORMATION ON INGREDIENTS:
Chemical Composition Symbol Risk Phrase
Dibenzoyl Peroxide paste in phthalate plasticizer and inert fillers.
CAS Number Chemical Name % Classification
94-36-0 Dibenzoyl Peroxide <18%
3. HAZARD IDENTIFICATION:
Fire: May cause fire. May cause sensitisation by skin contact.
Health: May cause sensitisation by skin contact.
4. FIRST AID MEASURES:
Inhalation: Remove person to fresh air. If discomfort persists seek medical advice.
Skin Contact: Wash off with soap and water.
Eye Contact: Irrigate immediately with clean water for 15 minutes and obtain medical attention.
Ingestion: If swallowed, seek medical advice immediately. Do not induce vomiting.
5. FIRE FIGHTING MEASURES:
Suitable Extinguishing Media: Dry powder, water spray, CO2 and foam.
Unsuitable Extinguishing Media: Halones
Extraordinary Hazards: If involved in a fire will support combustion. In case of fire do not
breathe fumes.
Special Protective Equipment Required: Wear suitable protective clothing. Self contained breathing
apparatus if involved in a large fire.
6. ACCIDENTAL RELEASE MEASURES:
Scrape up and place in a suitable container. Wash area with water. Do not empty into drains.
7. HANDLING AND STORAGE:
Storage: Keep away from sources of ignition and heat. No sparking tools should be used. Never bring into direct
contact with accelerator. Store in a cool, dry place. Keep away from reducing agents, e.g. amines, acids,
alkalis, heavy metal compounds.
Handling: Wear suitable protective clothing.
8. Exposure Controls:
Occupational Exposure Limits. 5.0 mg/m3.
Engineering: Explosion proof ventilation recommended
Ventilation: Not normally required when using small quantities
Respiratory Protection: Not required for normal use
Eye Protection: Goggles if splashes can occur
Skin Protection: Wear gloves and overalls
Ingestion: N/A during normal use
9. PHYSICAL AND CHEMICAL PROPERTIES:
Appearance: Coloured smooth paste Odour: Faint
Viscosity: N/A Specific Gravity: 1.50 g/cm3 (20oC)
Boiling Point: Do not distil (decomposes) Boiling Range: N/A
Melting Point: Not required Flashpoint: Above the SADT (50oC)
Flammability: Will support combustion if Auto-Flammability: >380oC
involved in a fire. Explosive Properties: None
Oxidising Properties: Oxidising Vapour Pressure: Not determined
Evaporation Rate: N/A Solubility: Partly miscible in H2O
pH: Slightly acidic
10. STABILITY AND REACTIVITY:
Stability: A dangerous self-accelerating decomposition reaction and under certain circumstances explosion or fire can be
caused by direct contact with incompatible substances or by thermal decomposition.
Incompatibility: Violent reactions may be expected with acid, alkali, heavy metals and reducing agents. Avoid contact with
rust. Do not mix with peroxide accelerators.
Hazardous Polymerisations: None
Hazardous Decomposition: Carbon dioxide, Benzoic Acid, Benzane, Diphenyl, Phenyl Benzoate.
11. TOXICOLOGICAL INFORMATION:
Based on Dibenzoyl Peroxide 78% in water)
Oral: LD50 rat > 5000 mg/kg
Inhalation: LD50 rat > 24.3 mg/l 4 hours exposure time max.
Skin: Non irritating
Eyes: Mildly Irritating (5 minute exposure time)
12. ECOLOGICAL INFORMATION:
Based on Dibenzoyl Peroxide
Fish Acute toxicity, 96 h - LC50 = 2.0 mg/l (peocilia reticulata)
Bacteria Activated sludge respiration inhibition test EC50 = 35 mg/l readily biodegradable.
13. DISPOSAL CONSIDERATIONS: Dispose of in accordance with local regulations. Contaminated packaging should be
collected for recycling or most probably controlled incineration.
14. TRANSPORT INFORMATION:
ADR class 5.2 Item number 8b RIS class 5.2 Item number 8b
UN Number 3108 Trem Card Cefic Tec (R) 52G01
Proper shipping name - Organic Peroxide Type E Solid (Dibenzoyl Peroxide)
IMO/IMDG Page 5228
15. REGULATORY INFORMATION:
Label: Oxidising
R7 May cause fire.
R43 May cause sensitisation by skin contact.
S2 Keep out of reach of children.
S3/7/9 Keep container tightly closed in a cool, well ventilated area.
S14 Keep away from reducing agents e.g. amines, acids, alkalis, heavy metal compounds e.g.
accelerators, driers, metal soaps.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S50B Do not mix with Peroxide accelerators.
S50C Do not mix with reducing agents.
EEC Symbol
16. OTHER INFORMATION:
The data contained in this Safety Data Sheet has been supplied as required by the Chemical (Hazard Identification and Packaging) Regulations
1993, as amended, for the purpose of protecting the health and safety of industrial and commercial users who are deemed capable of understanding
and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the information. This information
is given in good faith, being based on the latest knowledge available to Bond It. No known relevant information has been omitted from this Material
Safety Data Sheet and the information provided is designed to enable the user to use the product safely. The user should not assume on the basis
of the information provided in this sheet that the product is suitable for any abnormal use. If the information provided in insufficient to ensure safety
in any particular application, contact Bond It for further advice before the proposed application is undertaken.
Code: BDAB 380/150 Date: September 2003 Supersedes Issue Dated: -
BOND IT, Sherwood House, Huntingdon Road, Brighouse, West Yorkshire. HD6 1PZ.
Tel: 01484 727400 Fax: 01484 727490 Email: sales@bond-it.co.uk Web: www.bond-it.co.uk
MATERIAL SAFETY DATA SHEET
ANCHOR BOND BASE
Product:
Code: BDAB 380/150 Date of Issue: September 2003 Version: 1
1. PREPARATION AND COMPANY IDENTIFICATION:
Preparation Trade Name: BOND IT ANCHOR BOND BASE
Bond It
Supplier:
Address: Un G16 River Bank Way, Lowfields Business Park, Elland, West Yorkshire. HX5 9DN. England.
Telephone: (+44) 01422 315300
Emergency: As Above
2. COMPOSITION/ INFORMATION ON INGREDIENTS:
Chemical Composition Symbol Risk Phrase
Unsaturated polyester resin in styrene with inorganic fillers.
CAS Number Chemical Name % Classification
100-42-5 Styrene <16% Xn; F
3. HAZARD IDENTIFICATION:
Harmful; Flammable; Irritant vapour
Health: Acute Effects - Irritant of skin, eyes and respiratory tract.
Long-Term Effects - Irritant. Can cause skin disorders with repeated prolonged exposure. Inhalation of vapour
can cause nausea and headaches.
4. FIRST AID MEASURES:
Inhalation: Remove person to fresh air. If discomfort persists seek medical advice.
Skin Contact: Wash off with soap and water.
Eye Contact: Irrigate immediately with clean water for 15 minutes and obtain medical attention.
Ingestion: If swallowed, seek medical advice immediately. Do not induce vomiting.
5. FIRE FIGHTING MEASURES:
Suitable Extinguishing Media: Dry powder, CO2 and foam.
Extraordinary Hazards: Flammable. Sealed containers when heated can pressurise leading to
explosion. Emits acrid black smoke and irritating fumes when heated to
decomposition.
Special Protective Equipment Required: Wear self contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES:
Scrape up and place in a suitable container. Wash area with water. Do not empty into drains or sewers.
7. HANDLING AND STORAGE:
Storage: Keep away from sources of ignition and heat. No sparking tools should be used. Store in a cool, dry, well
ventilated area below 25oC. Store separately from peroxides.
8. Exposure Controls:
Occupational Exposure Limits. Long Term: 100 ppm
Short Term: 10 minutes 250ppm
Respiratory Protection: If forced air extraction is not available in enclosed areas an organic vapour mask will be
required if the occupational exposure limit is exceeded.
Eye Protection: Goggles if splashes can occur
Skin Protection: Wear gloves at all times
Ingestion: Unlikely during normal use
9. PHYSICAL AND CHEMICAL PROPERTIES:
Appearance: Thick coloured paste Odour: Styrene
Viscosity: N/A Specific Gravity: 1.63 g/cm3 (20oC)
Boiling Point/Range: N/A Melting Point/Range: N/A
Flashpoint: 31oC Flammability: Flammable
Auto-Flammability: 490oC Evaporation Rate: N/A
Explosive Properties: Lower Limit:1.1% Upper Limit:6.1% Oxidising Properties: None
Vapour Pressure: 6.52mb @ 20oC (Styrene) Solubility: Insoluble in water
10. STABILITY AND REACTIVITY:
Stability: Can polymerise (solidify) exothermically if heated, exposed to air, sunlight or by addition of free radical initiators.
Stable under normal conditions.
Materials To Avoid: Reacts vigorously with strong oxidising agents and peroxides.
Hazardous Polymerisations: Polymerisations in a closed container can give rise to pressure, which may rupture the
vessel.
Hazardous Decomposition: Emits acrid smoke and irritating fumes when heated to decomposition.
11. TOXICOLOGICAL INFORMATION:
Oral: Material is classed as harmful. An LD50 rat is 5g/kg for Styrene. LC50 rat ranges between
2770-6000ppm.
Inhalation: Lung irritant can induce drowsiness and eventual unconsciousness.
Skin: Modest irritant.
Eyes: Severe irritant.
12. ECOLOGICAL INFORMATION:
Do not discharge into drains or the environment.
13. DISPOSAL CONSIDERATIONS: Uncured - place in a suitable container and dispose of as chemical waste in
accordance with local regulations. Small quantities may be reacted with the corresponding amount of activator. Allow to
cure and dispose of as solid waste.
14. TRANSPORT INFORMATION:
Harmful. Flammable.
UN Number / SI No: 3269 Polyester Resin Kit
Hazard Class 3 ; Packing Group III
15. REGULATORY INFORMATION:
Label: Harmful; Flammable
R10 Flammable.
R20 Harmful by inhalation.
R36/38 Irritating to skin and eyes.
S2 Keep out of reach of children.
S23 Do not breathe vapour.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
EEC Symbol
16. OTHER INFORMATION:
The data contained in this Safety Data Sheet has been supplied as required by the Chemical (Hazard Identification and Packaging) Regulations
1993, as amended, for the purpose of protecting the health and safety of industrial and commercial users who are deemed capable of understanding
and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the information. This information
is given in good faith, being based on the latest knowledge available to Bond It. No known relevant information has been omitted from this Material
Safety Data Sheet and the information provided is designed to enable the user to use the product safely. The user should not assume on the basis
of the information provided in this sheet that the product is suitable for any abnormal use. If the information provided in insufficient to ensure safety
in any particular application, contact Bond It for further advice before the proposed application is undertaken.
Code: BDAB 380/150 Date: September 2003 Supersedes Issue Dated: -
BOND IT, Unit G16 River Bank Way, Lowfields Business Park, Elland, West Yorkshire. HX5 9DN.
Tel: 01422 315300 Fax: 01422 315310 Email: sales@bond-it.co.uk Web: www.bond-it.co.uk
|