MATERIAL SAFETY DATA SHEET F/1/LB/SP/060
Mis en service le 05/10/2006 * R関ision / * Version : 02
Version of : 2006 Dec. 19
Supersedes the one dated : 2005 Oct. 06
1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY.
ECOPOXY
Product name
Intended use Chemical anchoring packaged with two separate chambers filled with resin and hardener. Both
products are mixed in order to form a non reactive solid material.
Company Name SOCOM S.A.
Adress SOGARIS 196 - F94654 RUNGIS Cedex ?France.
T閘 : +33 1 45 60 55 21
Contact Fax : +33 1 46 87 55 20
Emergency : +33 1 45 60 55 21
2. COMPOSITION - INFORMATION ON INGREDIENTS.
Ingr閐ients CAS EINECS R phrases Symbols Quantity
Methacrylat resin V.O.C free / / R36/38 Xi 10 - 15%
Dibenzoyle peroxyde 94-36-0 / R2 ?R36 ?R43 Xi, E < 1%
3. HAZARDS IDENTIFICATION.
Classification : Irritant.
Specific hazards : Irritating to eyes and skin.
May cause sensitisation by skin contact.
4. FIRST AID MEASURES.
Inhalation : Not applicable, slightly acid odor
Skin contact : Remove contaminated clothing immediately. Wash contaminated areas with
plenty of water and soap and rinse with water.
Do not use any solvent.
May lead to sensitisation.
Eye contact : Flush with plenty of water for minimum 15 minutes, seek medical attention
immediately if irritation persists.
Ingestion Seek medical attention immediately. Do not induce vomiting.
If swallowed, drink plenty of milk or water.
5. FIRE FIGHTING MEASURES.
Suitable extinguishing media : Foam, waterspray, carbon dioxide extinguishing media.
Direct water jet is not suitable.
Exposure hazards : Avoid breathing vapours and fumes.
Toxic fumes formed during decomposition (carbon oxides) may cause
severe health hazard.
Contact with combustible material may cause fire.
Special protective equipment : Self contained breathing apparatus may be required for serious fires.
Page 1 / 4
MATERIAL SAFETY DATA SHEET F/1/LB/SP/060
Mis en service le 05/10/2006 * R関ision / * Version : 02
6. ACCIDENTAL RELEASES MEASURES.
Personal precautions : Suitable protective clothing (overalls), rubber or plastic coated gloves,
eye/face protection are advised.
Do not breathe vapours. Keep away from sources of ignition.
Evacuate non-essential staff and those not equipped with above mentioned
protections.
Environmental protection : Do not empty into drains and water courses. If substance has entered a
water, course, lake or sewer or contaminated soil or vegetation, advise the
responsible authority according to local regulations.
Cleaning up procedures : Shovel into a suitable closed container.
7. HANDLING AND STORAGE.
Handling : Provide good ventilation of the workroom.
Keep work clothes separate. Avoid contact with skin or eyes.
Do not breathe. Keep away from heat source of ignition as well as from
open fire.
Storage : Store in dry and cool conditions away from direct sunlight and ultraviolet
radiation or strong oxidizers.
Keep in the original package at temperature between 5 to 25癈.
Smoking, eating, drinking and the preparation of foodstuffs are prohibited
where materials are stored or handled.
8. EXPOSURE CONTROL ?PERSONAL PROTECTION.
None required when good ventilation.
Respiratory protection :
Hand protection : Wear rubber or plastic coated gloves , however due to its concept of
packaging, the materials unmixed should not be in contact with skin.
Eyes protection : Safety glasses /goggles or face shield advised, particularly when working
overhead.
Skin protection : Wear suitable protective clothing.
Wash hands after each work period and before eating.
9. PHYSICAL AND CHEMICAL PROPERTIES.
Putty. pH : Not applicable.
Aspect :
Colour - Resin : White Water solubility : Insoluble.
- Hardener : Black
- Mix : Grey
Odour : Slighty acid. Flash point : > 200癈
Viscosity @ 23癈 : > 500 Pa.s D閏omposition : > 200癈 for cured material.
Thixotropic paste.
Density : 1,70
10. STABILITY AND REACTIVITY.
Conditions to Avoid : Extremes of temperature, sunlight and UV-rays.
Materials to Avoid : Strong acids, strong bases and strong oxidising agents.
Hazardous decomposition products : By thermal decomposition (CO, CO2, acids vapors and other)
flammable gases, etc..).
Page 2 / 4
MATERIAL SAFETY DATA SHEET F/1/LB/SP/060
Mis en service le 05/10/2006 * R関ision / * Version : 02
11.TOXICOLOGICAL INFORMATIONS.
Eye irritation : Irritant
Skin irritation : Avoid contact with skin. May cause sensitisation by skin contact.
12. ECOLOGICAL INFORMATIONS.
Ecotoxicity : Not applicable due to low volumes involved.
The packaging is waterproof and will avoid leakages.
In case of an unlikely accident in large volume, do not allow the material to
enter water courses.
If water is contaminated inform the relevant authorities inmediately.
13. DISPOSAL INFORMATIONS.
Product : Can be incinerated in compliance with local regulations
Packaging : Contaminated packaging material should be disposed as identically to the
product itself.
Non contaminated packaging material should be treated as household
waste or as recycling material.
Cured material may be considered inert and disposed of as builders waste.
14. TRANSPORT INFORMATIONS.
UN
ADR / IMDG / IATA : 3108
Class 5.2
Packing Group : II
label : 5.2
Organic Peroxyde Organique Type E, Solid.
Product Identification :
Marine Polluant : No
15. REGULATORY INFORMATIONS.
Classification according to EEC Coucil Directives.
Symbol:
Xi - Irritant
R Phrases : - R36/38 : Irritating to eyes and skin.
- R43 : May cause sensitisation with skin contact.
S Phrases : - S26 : In case of contact with eyes, rinse immediately with plenty of water
and seek medical attention.
- S28 : After contact with skin, wash immediately with plenty of water.
- S36/37/39 : Wear suitable protective clothing, gloves and eye/face
protection.
Page 3 / 4
MATERIAL SAFETY DATA SHEET F/1/LB/SP/060
Mis en service le 05/10/2006 * R関ision / * Version : 02
16. OTHER INFORMATIONS.
Recommended use : Refer to the current technical data sheet.
Further informations : This product must be handled only by personal well informed of safety
conditions.
The above information is based on our present knowledge, and is intended
to describe the product in terms of health & safety requirements only..
No liability is accepted for any injury, loss, damage or cost arising directly
or indirectly from tries. Use of information contained within this MSDS since
the customer's treatment of the product is necessarily out of our control.
The data given above is based upon products in terms of their safety
requirements. It does not guarantee the properties of the products
described.
Page 4 / 4
|