Safety Data Sheet
according to 91/155/EEC and ISO 11014-1
(see instructions in Annex to 93/112/EC)
Date of printing: 18.03.2003 Page: 1/6
Revised: 18.03.2003 SDS No.: 268A
HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA
1. Identification of the substance/preparation and company
Product
Product name
Sikafast 5211, Comp A
Recommended use
Sealants and adhesives/Elastic products
Manufacturer/supplier information
Manufacturer/supplier: Sika Australia Pty Ltd
Street/postbox: 55 Elizabeth Street
Town/City and Post Code: WETHERILL PARK NSW 2164
Country: Australia
Phone: (02) 9725 1145
Telefax: (02) 9725 3330
General information: Operations Manager
Emergency information phone:
1800 033 111
2. Composition/information on ingredients
Chemical characterization
Modified acrylates
Hazardous ingredients
Designation according to 67/548/EEC
CAS No. Concentration Danger symbols R phrases
?Tetrahydro furfuryl methacrylate
2455-24-5 30 ?60 % Xi 36/37/38
?Ethanol,2,2'-[(4-methylphenol)imino]bis amine ethoxylate
3077-12-1 1 - 10 % Xi 41
3. Hazards identification
Hazards identification
Xi Irritant
Information on hazards to man and to the environment
36/37/38 Irritating to eyes, respiratory system and skin.
4. First-aid measures
General instructions
In any case show the physician the Safety Data Sheet
After inhalation
Ensure supply of fresh air.
Take medical treatment.
After skin contact
In case of contact with skin wash off immediately with soap and
water
Product name: Sikafast 5211, Comp A
Date of printing: 18.02.2003 Page: 2/6
Revised: 18.03.2003 SDS No.: 268A
4. First-aid measures (continued)
Remove soiled or soaked clothing immediately, do not allow to dry.
Consult a doctor if skin irritation persists.
After eye contact
In case of contact with the eyes, rinse immediately for at least
15 minutes with plenty of water.
Summon a doctor immediately.
After ingestion
Do not induce vomiting.
Summon a doctor immediately.
5. Fire-fighting measures
Suitable extinguishing media
water
foam
carbon dioxide
dry powder
Unsuitable extinguishing media for safety reasons
Not applicable.
Exposure hazard arising from the product, its combustion products or
resulting gases
In the event of fire the following can be released:
Carbon monoxide (CO)
Carbondioxide (CO2)
Nitrogen oxides (NOx)
Special protective equipment for fire-fighting
Use breathing apparatus.
Additional information
Cool containers with water spray jet.
Fire residues and contaminated firefighting medium must be disposed
of in accordance with the local regulations.
6. Accidental release measures
Personal precautions
Remove persons to safety.
Ensure adequate ventilation.
Use personal protective clothing.
Use breathing apparatus if exposed to vapours/dust/aerosol.
Environmental precautions
In case of entry into waterways, soil or drains,
inform the responsible authorities.
Product name: Sikafast 5211, Comp A
Date of printing: 18.03.2003 Page: 3/6
Revised: 18.03.2003 SDS No.: 268A
6. Accidental release measures (continued)
Procedures for cleaning up
Pick up mechanically
When picked up, treat material as prescribed under heading "Disposal".
Remove residues with small amount of alcohol-based solvent.
7. Handling and storage
Handling
Instructions for safe handling
Provide good ventilation of working area (local exhaust ventilation if
necessary).
See chapter 8 / Personal protective equipment.
Instructions for fire and explosion protection
Keep away from sources of ignition - no smoking.
Storage
Requirements for storage rooms and containers
Keep container tightly closed in a cool, well-ventilated place
Combined storage instructions
Keep away from food, beverages and animal feedstocks.
Additional information regarding storage
Protect from heat and direct sunlight
8. Exposure controls/personal protection
Personal protective equipment
General protective and hygiene measures
Do not inhale vapours
Take care for sufficient ventilation or exhaust on the workshop place.
Do not eat, drink or smoke during work time.
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately.
Respiratory protection
In case of insufficient ventilation.
Dust protection mask with vapour filter
type A.
Class of vapour filter is depending on
pollutant concentration on the scene.
Hand protection
Rubber gloves
Eye protection
Tightly fitting safety glasses
Product name: Sikafast 5211, Comp A
Date of printing: 18.03.2003 Page: 4/6
Revised: 18.03.2003 SDS No.: 268A
8. Exposure controls/personal protection (continued)
Body protection
protective clothing
9. Physical and chemical properties
Appearance
Physical state: Pasty
Colour: bluish white
Odour: characteristic
Data relevant to safety Method
Decomposition temperature > 200 癈
Flash point > 90 癈
Density at 20癈 1.2 g/cm3
Solubility in water insoluble
at 20癈
pH value at 20癈 approx. 7
Viscosity at 20癈 approx. 4000 - mPas
10. Stability and reactivity
Conditions to avoid
If the storage time and temperature is exceeded, it can cause
polymerization
Materials to avoid/dangerous reactions
Reactions with peroxides and other radical components.
Hazardous reactions possible with:
Amines
Heavy metals
Thermal decomposition and hazardous decomposition products
No decomposition if used as prescribed.
Carbon monoxide and carbon dioxide
Possible in traces:
Nitrous gases
11. Toxicological information
Sensitization
Allergic reactions can be observed by sensitised persons.
Experience on humans
When skin contact:
Product name: Sikafast 5211, Comp A
Date of printing: 18.03.2003 Page: 5/6
Revised: 18.03.2003 SDS No.: 268A
11. Toxicological information (continued)
Irritation.
When eyes contact:
Irritation.
When inhalation:
Irritation.
When swallowed:
Small amount may cause considerable health disorders.
Further toxicological information
For more-component products see also the safety-data-sheets of the
other components.
12. Ecological information
Additional information
Product is strongly water polluting.
Do not allow to enter waste water drain, waterways or soil.
Once cured, the product will unlikely have any adverse effect on the
environment.
13. Disposal considerations
Product
Recommendations
Must be disposed of in a special waste disposal unit in accordance
with the corresponding regulations.
See chapter 15, national regulations.
Contaminated packaging
Recommendations
Completely emptied packagings can be given for recycling.
Packaging that cannot be cleaned should be disposed of as product
waste
14. Transport information
ADG/ADR/RID
Further information
No dangerous good.
IMO/IMDG
Further information
No dangerous good.
Product name: Sikafast 5211, Comp A
Date of printing: 18.03.2003 Page: 6/6
Revised: 18.03.2003 SDS No.: 268A
14. Transport information (continued)
IATA/ICAO
Further information
No dangerous good.
15. Regulatory information
Labelling according to 88/379/EEC
The product is classified and labelled in accordance with
EC directives/the relevant national laws.
Danger symbols
Xi Irritant
R phrases
36/37/38 Irritating to eyes, respiratory system and skin.
S phrases
26 In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
51 Use only in well-ventilated areas.
National regulations
S5 Poison (SUSDP ?Australia)
Toxicity low (CH)
Toxicity class 4 SFOPH T No.: 615084
Water hazardous class (WGK)
WGK 3 ( self-classification )
Brandklasse (CH)
3
Abfallcode und Abfallbezeichnung
DISPOSE AS SPECIAL WASTE: PAINT HAVING AN ORGANIC PHASE
(BASIS ACRYLATE)
16. Other information
asterisk (*) on left margin marks modification of previous version
The information contained in this Safety Data Sheet respects the
actual status of knowledge at the date of publication. They do not
imply any warranty. For warranty obligations the specific product
descriptions and the General Sales Conditions are of relevance only.
Safety Data Sheet
according to 91/155/EEC and ISO 11014-1
Date of printing: 13.02.2003 Page: 1/6
Revised: 15.01.2003 MSDS Ref No. : 373
HAZARDOUS ACCORDING TO THE CRITERIA OF WORKSAFE AUSTRALIA
1. Identification of the substance/preparation and company
Product
Product name
SikaFast?5200 Part B
Manufacturer/supplier information
Manufacturer/supplier: SIKA Australia Pty Ltd
Street/postbox: 55 Elizabeth Street
Town/City and Post Code: Wetherill Park, N.S.W
Country: Australia
Phone: (02) 9725 1145
Telefax: (02) 9725 3330
General information: Operations Manager
Emergency information phone: 1 800 033 111 (AUS)
2. Composition/information on ingredients
Chemical characterization
Polymerisation initiator (Peroxides)
Hazardous ingredients
Designation according to 67/548/EEC
CAS No. Concentration Danger symbols R phrases
EEC No.
?dibenzoyl peroxide
94-36-0 10 - 30 % E,Xi 2,7,36,43
202-327-6
* 3. Hazards identification
Hazards identification
O Oxidizing
Xi Irritant
Information on hazards to man and to the environment
7 May cause fire.
43 May cause sensitization by skin contact.
4. First-aid measures
General instructions
In any case show the physician the Safety Data Sheet
After inhalation
In the event of symptoms take medical treatment.
After skin contact
In case of contact with skin wash off immediately with soap and
water
Product name: SikaFast?5200 Part B
Date of printing: 13.02.2003 Page: 2/6
Revised: 15.01.2003 MSDS Ref No. : 373
4. First-aid measures (continued)
Consult a doctor if skin irritation persists.
After eye contact
In case of contact with the eyes, rinse immediately for at least
15 minutes with plenty of water.
Summon a doctor immediately.
After ingestion
Do not induce vomiting.
Summon a doctor immediately.
5. Fire-fighting measures
Suitable extinguishing media
compatible with all usual extinguishing media
Exposure hazard arising from the product, its combustion products or
resulting gases
In the event of fire the following can be released:
Carbon monoxide (CO)
Carbondioxide (CO2)
Nitrogen oxides (NOx)
Additional information
Fire residues and contaminated firefighting medium must be disposed
of in accordance with the local regulations.
Collect contaminated firefighting water separately, must not
be discharged into the drains.
6. Accidental release measures
Personal precautions
Ensure adequate ventilation.
Use personal protective clothing.
Use breathing apparatus if exposed to vapours/dust/aerosol.
Environmental precautions
Do not allow to enter drains or waterways
In case of entry into waterways, soil or drains,
inform the responsible authorities.
Procedures for cleaning up
Pick up with absorbent material (e.g. sand, sawdust, general-purpose
binder).
When picked up, treat material as prescribed under heading "Disposal".
Product name: SikaFast?5200 Part B
Date of printing: 13.02.2003 Page: 3/6
Revised: 15.01.2003 MSDS Ref No. : 373
7. Handling and storage
Handling
Instructions for safe handling
See chapter 8 / Personal protective equipment.
Instructions for fire and explosion protection
Keep away from sources of ignition - no smoking.
Vapours may form explosive mixtures with air
Take precautionary measures against electrostatic loading.
Keep away from combustible materials
Storage
Requirements for storage rooms and containers
Keep container tightly closed and dry in a cool, well-ventilated place
Combined storage instructions
Do not store together with oxidizing agents.
Additional information regarding storage
Protect from frost.
Protect from heat and direct sunlight
Protect from atmospheric moisture and water
8. Exposure controls/personal protection
Personal protective equipment
General protective and hygiene measures
Take care for sufficient ventilation or exhaust on the workshop place.
Avoid contact with eyes and skin
Use barrier skin cream.
Remove soiled or soaked clothing immediately.
Do not eat, drink or smoke during work time.
Wash hands before breaks and after work.
Respiratory protection
Not applicable.
Hand protection
Butyl rubber/nitrile rubber gloves
Eye protection
Safety glasses
Body protection
Working clothes
Product name: SikaFast?5200 Part B
Date of printing: 13.02.2003 Page: 4/6
Revised: 15.01.2003 MSDS Ref No. : 373
9. Physical and chemical properties
Appearance
Physical state: Pasty
Colour: black
Odour: almost odourless
Data relevant to safety Method
Decomposition temperature > 60 癈
Flash point > 255 癈 (lowest volatile component)
Vapour pressure at 20癈 not determined
Density at 20癈 1.4 g/cm3
Solubility in water insoluble...20癈
pH value at 20癈 not applicable
Viscosity at 20癈 approx 4000 mPas
10. Stability and reactivity
Conditions to avoid
To avoid thermal decomposition do not overheat
Materials to avoid/dangerous reactions
Hazardous reactions possible with:
Reducing agents
Acids
Thermal decomposition and hazardous decomposition products
Flammable gases/vapours
11. Toxicological information
Sensitization
Sensitization/allergic reaction possible.
Allergic reaction can may be observeed in sensitive persons, even
on very low concentrations.
Experience on humans
When skin contact:
May cause irritation.
When eyes contact:
May cause irritation.
When inhalation:
May cause irritation.
When swallowed:
May cause health disorders.
Product name: SikaFast?5200 Part B
Date of printing: 13.02.2003 Page: 5/6
Revised: 15.01.2003 MSDS Ref No. : 373
12. Ecological information
Additional information
Do not allow to enter waste water drain, waterways or soil.
13. Disposal considerations
Product
Recommendations
Must be disposed of in a special waste disposal unit in accordance
with the corresponding regulations.
See chapter 15, national regulations.
The European Waste Code numbers in force are based on the origin of waste
and not on its chemical composition. At the actual status of knowledge
the different kind of waste cannot be unambigously related to the
Eurpean Waste Code Numbers. Please contact the corresponding authority.
Packaging
Recommendations
Completely emptied packagings can be given for recycling.
Packaging that cannot be cleaned should be disposed of as product
waste
14. Transport information
ADG/ADR/RID
Further information
No dangerous goods.
IMO/IMDG
Further information
No dangerous goods.
IATA/ICAO
Further information
No dangerous goods.
* 15. Regulatory information
Labelling according to EEC Directive
The product is classified and labelled in accordance with
EC directives/the relevant national laws.
Relevant hazardous ingredients for labelling
Contains: dibenzoyl peroxide
Danger symbols
O Oxidizing
Xi Irritant
R phrases
7 May cause fire.
43 May cause sensitization by skin contact.
Product name: SikaFast?5200 Part B
Date of printing: 13.02.2003 Page: 6/6
Revised: 15.01.2003 MSDS Ref No.: 373
* 15. Regulatory information (continued)
S phrases
3/7 Keep container tightly closed in a cool place.
24 Avoid contact with skin.
36/39 Wear suitable protective clothing and eye/face
protection.
37 Wear suitable gloves.
National regulations
Toxicity law (CH)
S5 Poison (SUSDP) (AUS)
Toxicity class 4 SFOPH T No.: 618284
Water hazardous class (WGK)
WGK 1
Brandklasse (CH)
5
Abfallcode und Abfallbezeichnung (CH)
DISPOSE AS SPECIAL WASTE: CHEMICAL WASTE WHOSE QUALITATIVE
COMPOSITION IS KNOWN: BENZOYLPEROXIDE ON INORGANIC FILLERS.
* 16. Other information
asterisk (*) on left margin marks modification of previous version
R-phrases of the ingredients listed in chapter 2
2 Risk of explosion by shock, friction, fire or other
sources of ignition.
36 Irritating to eyes.
43 May cause sensitization by skin contact.
The information contained in this Safety Data Sheet corresponds to our
level of knowledge at the time of publication. All warranties are ex-
cluded. Our most current General Sales Conditions shall apply. Please
consult the Technical Data Sheet prior to any use and processing.
|