MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: FUSOR METAL ADH B.L.C,MED,PT.B
Product Use/Class: ACRYLIC ADHESIVE, PART 2 OF 2
Reference: Applies to Stock Number 108B, 109B
TRANSPORTATION EMERGENCY:
LORD CORPORATION CHEMTREC 24 HR EMERGENCY NO.
111 LORD DRIVE 800 424-9300
(Outside Continental U.S. 703 527-3887)
CARY, NC 27512-8012
NON-TRANSPORTATION EMERGENCY:
INFORMATION TELEPHONE: 814 763-2345
814 868-3611
EFFECTIVE DATE: 01/30/2004
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS Number Weight % ACGIH TLV- ACGIH TLV- OSHA PEL- OSHA PEL- Skin
Less Than TWA STEL TWA CEILING
Epoxy resin PROPRIETARY 30.0 % N.E. N.E. N.E. N.E. N.A.
Dibutyl phthalate 84-74-2 5.0 % 5 mg/m3 N.E. 5 mg/m3 N.E. N.A.
Benzoyl peroxide 94-36-0 5.0 % 5 mg/m3 N.E. 5 mg/m3 N.E. N.A.
N.A. - Not Applicable, N.E. - Not Established, S - Skin Designation
3. HAZARDS IDENTIFICATION
*** EMERGENCY OVERVIEW ***: Black Paste, with Mild odor. May cause skin and eye irritation. May cause
allergic skin reaction. May cause respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: May cause eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin irritation. May cause skin sensitization.
May cause dermatitis.
EFFECTS OF OVEREXPOSURE - INHALATION: May cause respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - INGESTION: Harmful if swallowed. Ingestion is not an expected route of
entry in industrial or commercial uses.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Chronic skin contact may cause dermatitis.
PRIMARY ROUTE(S) OF ENTRY: Skin Contact, Inhalation, Ingestion, Eye Contact
4. FIRST AID MEASURES
FIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding
eyelids open while flushing. Get prompt medical attention.
FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated
clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.
300000005097
Page: 1
Product: FUSOR METAL ADH B.L.C,MED,PT.B, Effective Date: 01/30/2004
FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is
difficult, give oxygen. Get immediate medical attention.
FIRST AID - INGESTION: If swallowed, do not induce vomiting. Give victim one or two glasses of water or milk.
Call a physician or poison control center immediately for further instructions. Never give anything by mouth to an
unconscious person.
5. FIRE-FIGHTING MEASURES
FLASH POINT: 201 癋, 93 癈 LOWER EXPLOSIVE LIMIT (%): Not Applicable
Setaflash Closed Cup UPPER EXPLOSIVE LIMIT (%): Not Applicable
AUTOIGNITION TEMPERATURE: N.D.
EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may rupture when exposed to extreme heat.
Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be
generated by thermal decomposition or combustion.
SPECIAL FIREFIGHTING PROCEDURES: Wear full firefighting protective clothing, including self-contained
breathing apparatus (SCBA). If water is used, fog nozzles are preferable.
6. ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Avoid breathing vapors. Use self-
contained breathing equipment. Notify appropriate authorities if necessary. Contain and remove with inert absorbent
material. Avoid contact. Keep non-essential personnel away from spill area. Before attempting cleanup, refer to hazard
caution information in other sections of the MSDS form.
7. HANDLING AND STORAGE
HANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash
thoroughly after handling. Avoid breathing of vapor or spray mists. Do not handle until all safety precautions have been
read and understood. Empty containers should not be re-used. Use with adequate ventilation.
STORAGE: Store only in well-ventilated areas. Keep container closed when not in use.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Sufficient ventilation in pattern and volume should be provided in order to maintain
air contaminant levels below recommended exposure limits.
RESPIRATORY PROTECTION: Use a NIOSH approved air-purifying organic vapor respirator if occupational
limits are exceeded. For emergency situations, confined space use, or other conditions where exposure limits may be
greatly exceeded, use an approved air-supplied respirator. Observe OSHA regulations (29CFR 1910.134) for respirator
use.
SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.
EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where
splashing may occur.
OTHER PROTECTIVE EQUIPMENT: Remove and wash contaminated clothing before reuse.
HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in any
chemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or
stored. Wash thoroughly after handling.
Page: 1
Product: FUSOR METAL ADH B.L.C,MED,PT.B, Effective Date: 01/30/2004
9. PHYSICAL AND CHEMICAL PROPERTIES
642 癋 - 642 癋 Heavier than Air
BOILING RANGE: VAPOR DENSITY:
Black Not Applicable
APPEARANCE: EVAPORATION RATE:
Paste 15 lb/gal
PHYSICAL STATE: DENSITY, LB/GL:
Mild 1.8 g/cm3
ODOR: SPECIFIC GRAVITY:
Insoluble N.A.
SOLUBILITY IN H2O: pH:
N.D. N.D.
FREEZE POINT: ODOR THRESHOLD:
0.0 % 0.0 %
VOLATILE BY WEIGHT: VOLATILE BY
VOLUME:
N.D.
VAPOR PRESSURE:
N.D.
COEFFICIENT OF WATER/OIL
DISTRIBUTION:
(See section 16 for abbreviation legend)
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID: High temperatures.
INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions.
STABILITY: Product is stable under normal storage conditions.
11. TOXICOLOGICAL INFORMATION
No Data
PRODUCT LD50 (ORAL)
No Data
(DERMAL)
No Data
PRODUCT LC50
12. ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local
environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and
disposal facility.
14. TRANSPORT INFORMATION
This product is NOT REGULATED for non-bulk road shipments. For the most accurate shipping information, refer to
your transportation/compliance department regarding changes in package size, mode of shipment or other regulatory
descriptors.
15. REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
This product is considered hazardous as defined by 29 CFR 1910.1200 (OSHA HazCom Standard.)
SARA SECTION 313:
Page: 1
Product: FUSOR METAL ADH B.L.C,MED,PT.B, Effective Date: 01/30/2004
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS Number Weight % Less Than
Benzoyl peroxide 94-36-0 5.0 %
Dibutyl phthalate 84-74-2 5.0 %
TOXIC SUBSTANCES CONTROL ACT:
INVENTORY STATUS
The chemical substances in this product are on the TSCA Section 8 Inventory.
EXPORT NOTIFICATION
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if
exported from the United States:
Chemical Name CAS Number
Epoxy resin PROPRIETARY
16. OTHER INFORMATION
HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 1 PHYSICAL HAZARD: 1
* - Indicates a chronic hazard; see Section 3
VOLATILE ORGANIC COMPOUNDS (Calculated): 0 lb/gal, 0 g/l
LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
DISCLAIMER
The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of
handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred
by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and
regulations.
Page: 1
MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: FUSOR METAL ADH B.L.C,MED,PT.A
Product Use/Class: ACRYLIC ADHESIVE, PART 1 OF 2
Reference: Applies to Stock Number 108B, 109B
TRANSPORTATION EMERGENCY:
LORD CORPORATION CHEMTREC 24 HR EMERGENCY NO.
111 LORD DRIVE 800 424-9300
(Outside Continental U.S. 703 527-3887)
CARY, NC 27512-8012
NON-TRANSPORTATION EMERGENCY:
INFORMATION TELEPHONE: 814 763-2345
814 868-3611
EFFECTIVE DATE: 08/26/2004
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS Number Weight % ACGIH TLV- ACGIH TLV- OSHA PEL- OSHA PEL- Skin
Less Than TWA STEL TWA CEILING
Methyl methacrylate 80-62-6 35.0 % 50 ppm 100 ppm 410 mg/m3 N.E. N.A.
100 ppm
Methacrylate Blend PROPRIETARY 5.0 % N.E. N.E. N.E. N.E. N.A.
Methacrylate PROPRIETARY 5.0 % N.E. N.E. N.E. N.E. N.A.
phosphate ester
Methacrylic acid 79-41-4 5.0 % 20 ppm N.E. N.E. N.E. N.A.
N.A. - Not Applicable, N.E. - Not Established, S - Skin Designation
3. HAZARDS IDENTIFICATION
*** EMERGENCY OVERVIEW ***: Off-white Paste, with Sweet odor. Flammable liquid. May cause allergic
skin reaction. Causes skin and eye irritation. Causes respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin sensitization. May cause dermatitis.
Causes skin irritation.
EFFECTS OF OVEREXPOSURE - INHALATION: May be severely irritating to the nose, throat and respiratory
tract. May cause headache and nausea.
EFFECTS OF OVEREXPOSURE - INGESTION: Harmful if swallowed. Ingestion is not an expected route of
entry in industrial or commercial uses.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Chronic skin contact may cause dermatitis.
PRIMARY ROUTE(S) OF ENTRY: Skin Contact, Inhalation, Ingestion, Eye Contact
4. FIRST AID MEASURES
FIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding
eyelids open while flushing. Get prompt medical attention.
FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated
clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.
300000005086
Page: 1
Product: FUSOR METAL ADH B.L.C,MED,PT.A, Effective Date: 08/26/2004
FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is
difficult, give oxygen. Get immediate medical attention.
FIRST AID - INGESTION: If swallowed, do not induce vomiting. Give victim one or two glasses of water or milk.
Call a physician or poison control center immediately for further instructions. Never give anything by mouth to an
unconscious person.
5. FIRE-FIGHTING MEASURES
FLASH POINT: 60 癋, 15 癈 LOWER EXPLOSIVE LIMIT (%): 1.6 %(V)
Setaflash Closed Cup UPPER EXPLOSIVE LIMIT (%): 8.8 %(V)
AUTOIGNITION TEMPERATURE: N.D.
EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water Fog
UNUSUAL FIRE AND EXPLOSION HAZARDS: Flammable liquid and vapor. Keep containers tightly closed.
Isolate from heat, electrical equipment, sparks, open flame, and other sources of ignition. Closed containers may rupture
when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or
toxic gases and particulate may be generated by thermal decomposition or combustion.
SPECIAL FIREFIGHTING PROCEDURES: Wear full firefighting protective clothing, including self-contained
breathing apparatus (SCBA). If water is used, fog nozzles are preferable.
6. ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Keep non-essential personnel a
safe distance away from the spill area. Remove all sources of ignition (flame, hot surfaces, and electrical, static or
frictional sparks). Avoid breathing vapors. Use self-contained breathing equipment. Notify appropriate authorities if
necessary. Avoid contact. Using non-sparking tools, scoop the spilled material into a container for proper disposal. (If
necessary, use inert absorbent material to aid in containing the spill).
7. HANDLING AND STORAGE
HANDLING: Keep closure tight and container upright to prevent leakage. Ground and bond containers when
transferring material. Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing of vapor or spray
mists. Do not handle until all safety precautions have been read and understood. Use with adequate ventilation. Because
empty containers may retain product residue and flammable vapors, keep away from heat, sparks and flame; do not cut,
puncture or weld on or near the empty container. Do not smoke where this product is used or stored.
STORAGE: Refer to OSHA 29CFR Part 1910.106 "Flammable and Combustible Liquids" for specific storage
requirements. Store only in well-ventilated areas. Keep container closed when not in use.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Sufficient ventilation in pattern and volume should be provided in order to maintain
air contaminant levels below recommended exposure limits. Sufficient ventilation (using explosion-proof equipment)
should be provided to prevent flammable vapor/air mixtures from accumulating.
RESPIRATORY PROTECTION: Use a NIOSH approved air-purifying organic vapor respirator if occupational
limits are exceeded. For emergency situations, confined space use, or other conditions where exposure limits may be
greatly exceeded, use an approved air-supplied respirator. Observe OSHA regulations (29CFR 1910.134) for respirator
use.
SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.
EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where
splashing may occur.
Page: 2
Product: FUSOR METAL ADH B.L.C,MED,PT.A, Effective Date: 08/26/2004
OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is
likely. Remove and wash contaminated clothing before reuse.
HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Food or beverages should not
be consumed anywhere this product is handled or stored. Wash thoroughly after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
140 癋 - 322 癋 Heavier than Air
BOILING RANGE: VAPOR DENSITY:
Off-white Faster than n-butyl-
APPEARANCE: EVAPORATION RATE:
acetate.
Paste 9.42 lb/gal
PHYSICAL STATE: DENSITY, LB/GL:
Sweet 1.13 g/cm3
ODOR: SPECIFIC GRAVITY:
Insoluble N.A.
SOLUBILITY IN H2O: pH:
N.D. N.D.
FREEZE POINT: ODOR THRESHOLD:
0.0 % 0.0 %
VOLATILE BY WEIGHT: VOLATILE BY
VOLUME:
N.D.
VAPOR PRESSURE:
N.D.
COEFFICIENT OF WATER/OIL
DISTRIBUTION:
(See section 16 for abbreviation legend)
10. STABILITY AND REACTIVITY
CONDITIONS TO AVOID: Storage above 100 degrees F and below 32 degrees F. Exposure to sunlight, ultraviolet
light irradiation. Avoid dropping or puncture of containers.
INCOMPATIBILITY: Inorganic acids, organic acids, caustics, amines, peroxides, polymerization inhibitors.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, oxides of nitrogen.
HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions.
STABILITY: Product is stable under normal storage conditions.
11. TOXICOLOGICAL INFORMATION
No Data
PRODUCT LD50 (ORAL)
No Data
(DERMAL)
No Data
PRODUCT LC50
12. ECOLOGICAL INFORMATION
ECOLOGICAL INFORMATION: No Information
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local
environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and
disposal facility.
14. TRANSPORT INFORMATION
Adhesives
DOT PROPER SHIPPING NAME:
3
DOT HAZARD CLASS:
Page: 2
Product: FUSOR METAL ADH B.L.C,MED,PT.A, Effective Date: 08/26/2004
None
SECONDARY HAZARD:
1133
DOT UN/NA NUMBER:
II
PACKING GROUP:
128
EMERGENCY RESPONSE GUIDE
NUMBER:
The listed transportation classification applies to non-bulk road shipments. It does not address regulatory variations due
to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping
information, refer to your transportation/compliance department.
15. REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
This product is considered hazardous as defined by 29 CFR 1910.1200 (OSHA HazCom Standard.)
SARA SECTION 313:
This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372:
Chemical Name CAS Number Weight % Less Than
Methyl methacrylate 80-62-6 35.0 %
TOXIC SUBSTANCES CONTROL ACT:
INVENTORY STATUS
The chemical substances in this product are on the TSCA Section 8 Inventory.
EXPORT NOTIFICATION
This product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if
exported from the United States:
Chemical Name CAS Number
Inhibitor PROPRIETARY
16. OTHER INFORMATION
HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 3 PHYSICAL HAZARD: 1
* - Indicates a chronic hazard; see Section 3
VOLATILE ORGANIC COMPOUNDS (Calculated): 0 lb/gal, 0 g/l
LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
DISCLAIMER
The information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of
handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred
by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and
regulations.
Page: 2
|