Page: 1 MATERIAL SAFETY DATA SHEET Printed : 02/15/99
For Coatings, Resins and Related Materials
Revised : 02/15/99
===============================================================================
SECTION I - PRODUCT IDENTIFICATION
-------------------------------------------------------------------------------
Manufacturer: SIA ADHESIVES, INC. Information Phone: (330) 374-2786
123 WEST BARTGES ST. Emergency Phone: (330) 374-2900
DEPARTMENT 1932/1904 CHEMTREC Phone: (800)424-9300
AKRON OH 44311 -----------------------------------
! Hazard Ratings: Health - 1
Product Class: NITRILE PHENOLIC ADHESIVE ! none -> extreme Fire - 1
Trade Name : PL 601 ! 0 ---> 4 Reactivity - 0
Product Code : 3601000 !
C.A.S. Number: N/AP !
Prepared By : MICHAEL T. EBERHART
Title : ENVIRONMENTAL AFFAIRS MANAGER
===============================================================================
SECTION II - HAZARDOUS INGREDIENTS
-------------------------------------------------------------------------------
Weight --- Exposure Limits ---- VP
Ingredients CAS # % ACGIH/TLV OSHA/PEL mm HG
___________ ________________________________________________
ACRYLONITRILE/BUTADIENE POLY 9003-18-3 < 5. 0
MERCAPTOBENZOTHIAZOLE 149-30-4 < 1. 0
PHENOL (SKIN) 108-95-2 < 5. 5 ppm 5 ppm N/AP
LEAD 7439-92-1 < 0.1 0.15mg/M3 0.05 mg/M3 0
ZINC OXIDE 1314-13-2 < 5. 10 mg/M3 10 mg/M3 0
CADMIUM 7440-43-9 < 0.1 0.01mg/M3 mg/M3 0
*** ALL Ingredients in this product are listed in the T.S.C.A. Inventory.
===============================================================================
SECTION III - PHYSICAL DATA
-------------------------------------------------------------------------------
Boiling Range: N/AP Vapor Density: Non Volatile
Evap. Rate: n-Butyl Acetate Liquid Density: Heavier than Water.
Volatiles vol % 0.0 Wgt% 0.0 Wgt per gallon: 9.74 Pounds.
Spec. Gravity: 1.16927
Appearance: BROWN SOLID LITTLE ODOR
V.O.C.: NONE
===============================================================================
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
-------------------------------------------------------------------------------
Flammability Class: 3B Flash Point: N/AP F LEL: N/AP UEL: N/AP
-EXTINGUISHING MEDIA:
CARBON DIOXIDE, FOAM, DRY CHEMICAL.
-SPECIAL FIREFIGHTING PROCEDURES:
DO NOT ENTER CONFINED FIRE SPACE WITHOUT PROPER PROTECTIVE
EQUIPMENT INCLUDING NIOSH APPROVED SELF CONTAINED BREATHING
APPARATUS.
-UNUSUAL FIRE & EXPLOSION HAZARDS:
NONE KNOWN
Page: 2 SIA ADHESIVES, INC.
Material Safety Data Sheet for: PL 601(3601000)
===============================================================================
SECTION V - HEALTH HAZARD DATA
-------------------------------------------------------------------------------
-PERMISSIBLE EXPOSURE LEVEL:
SEE SECTION 11
-EFFECTS OF OVEREXPOSURE:
INHALATION:FUMES GIVEN OFF DURING CURE MAY CAUSE NOSE AND
THROAT IRRITATION,HEADACHE,AND NAUSEA.
SKIN CONTACT:LITTLE SHORT TIME EFFECTS. CHRONIC EFFECTS MAY
CAUSE DERMATITIS,AND ALLERGIC REACTION IN SOME SENSTIVE
PEOPLE.
INGESTION:NOT LIKELY'
EYE CONTACT:MAY CAUSE MECHANICAL ABRASION.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: SKIN RASH.
-FIRST AID:
INHALATION:REMOVE TO FRESH AIR,IF NOT BREATHING GIVE ARTIFICAL
RESPIRATION,PREFERABLY MOUTH TO MOUTH.IF BREATHING IS
DIFFICULT GIVE OXYGEN. CALL A PHYSICIAN.
SKIN CONTACT:WASH AFFECTED AREA WITH PLENTY OF WATER. SEE A
PHYSICAN IF IRRITATION DEVELOPES OR PRESISTS.
EYE CONTACT:SEE A PHYSICIAN.
===============================================================================
SECTION VI - REACTIVITY DATA
-------------------------------------------------------------------------------
STABLITY: [ ] Unstable [x] Stable
HAZARDOUS POLYMERIZATION: [ ] May occur [x] Will not occur
-INCOMPATABILITY:
OXIDIZING AGENTS
-CONDITIONS TO AVOID:
TEMPERATURES ABOVE 100 F
-HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON DIOXIDE, CARBON MONOXIDE, AMMONIA, PHENOL, CRESOL,
PHENOLIC FRAGMENTS, AND OTHER TOXIC FUMES POSSIBLE.
===============================================================================
SECTION VII - SPILL OR LEAK PROCEDURES
-------------------------------------------------------------------------------
-STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
PLACE IN SUITABLE CONTAINER FOR DISPOSAL
-WASTE DISPOSAL METHOD:
HIS MATERIAL, IF DISCARDED, MAY BE DEFINED AS HAZARDOUS BY
40CFR261. DISPOSAL METHOD: INCINERATE OR LANDFILL IN ACCORDANCE
WITH APPLICABLE FEDERAL STATE AND LOCAL LAW OR REGULATION.
===============================================================================
SECTION VIII - SPECIAL PROTECTION INFORMATION:
-------------------------------------------------------------------------------
-RESPIRATORY PROTECTION:
NIOSH APPROVED FOR ORGANIC VAPORS FROM HEATED PRODUCT.
-VENTILATION:
GENERAL REQUIRED IN OPERATIONS INVOLVING HEAT TO PROTECT
EMPLOYEE EXPOSED TO ANY VAPORS EVOLVED.
Page: 3 SIA ADHESIVES, INC.
Material Safety Data Sheet for: PL 601(3601000)
===============================================================================
SECTION VIII - SPECIAL PROTECTION INFORMATION: (cont.)
-------------------------------------------------------------------------------
-PROTECTIVE GLOVES:
CLOTH
-EYE PROTECTION:
NOT NORMALLY NEEDED.
-OTHER PROTECTIVE EQUIPMENT:
NONE NORMALLY NEEDED.
===============================================================================
SECTION IX - SPECIAL PRECAUTIONS
-------------------------------------------------------------------------------
-PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
CONTAINS PHENOLIC RESIN WHICH MAY CAUSE SKIN IRRITATION
USE ONLY IN A WELL VENTILATED AREA. AVOID PROLONGED OR
REPEATED SKIN CONTACT OR BREATHING OF VAPOR
STORE AT 40F OR BELOW.
-OTHER PRECAUTIONS:
DISCLAIMER OF LIABILITY: THE INFORMATION CONTAINED HEREIN IS
BASED ON DATA TAKEN FROM SOURCES BELEIVED TO BE BOTH CURRENT AND
RELIABLE AT TIME OF PUBLICATION. SOVEREIGN ENGINEERED ADHESIVES,
L.L.C., HOWEVER, MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, AS
TO ITS ACCURACY AND ASSUMES NO LIABILITY ARISING FROM ITS USE BY
OTHERS. COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL
LAWS AND REGULATIONS REMAINS THEE RESPONSIBILITY OF THE USER.
===============================================================================
SECTION X - ADDITIONAL REGULATORY INFORMATION
-------------------------------------------------------------------------------
-SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the
reporting requirements of section 313 of the Emergency Planning
and Community Right To Know Act of 1986 and of 40 CFR 372:
Percent by
CAS# Chemical Name Weight
------------- ------------------------------ -------
149-30-4 MERCAPTOBENZOTHIAZOLE < 1.
108-95-2 PHENOL (SKIN) 2.37
7439-92-1 LEAD < 1.
1314-13-2 ZINC OXIDE < 5.
7440-43-9 CADMIUM < 1.
Page: 4 SIA ADHESIVES, INC.
Material Safety Data Sheet for: PL 601(3601000)
===============================================================================
SECTION X - ADDITIONAL REGULATORY INFORMATION (cont.)
-------------------------------------------------------------------------------
-PROP 65 (CARCINOGEN):
WARNING: This product contains a chemical known to the state
of California to cause cancer.
CAS# Chemical Name
------------- ------------------------------
7440-43-9 CADMIUM
PRODUCT MAY CONTAIN TRACE AMOUNTS OF CALIFORNIA PROPOSITION
65 LISTED CHEMICALS.
-PROP 65 (TERATOGEN):
WARNING: This product contains a chemical known to the state
of California to cause birth defects or other reproductive harm.
CAS# Chemical Name
------------- ------------------------------
None
-PROP 65 (BOTH CARCINOGEN AND TERATOGEN):
WARNING: This product may contain a chemical known to the state of
California to cause cancer or birth defects or other reproductive harm
CAS# Chemical Name
------------- ------------------------------
7439-92-1 LEAD
|