---------------------------------------------------------------------------
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
---------------------------------------------------------------------------
CHEMICAL PRODUCT IDENTIFICATION:
PRODUCT ID . . . . . . . . . . : 276.099B
PRODUCT CLASS . . . . . . . . . : PAINT, SOLVENT BASE
TRADE NAME . . . . . . . . . . : FAST LINK SWEDISH FINISH CATALYST
FORMULA ID . . . . . . . . . . : 276-099B
MSDS PREPARATION DATE . . . . . . : 12/15/2005
MANUFACTURER IDENTIFICATION:
NAME . . . . . . . . . . . . . : INSL-X PRODUCTS CORPORATION
ADDRESS . . . . . . . . . . . . : 308 OLD COUNTY ROAD
EDGEWATER FL 32132
TELEPHONE . . . . . . . . . . . : 386-428-6461
EMERGENCY CONTACT . . . . . . . : CHEMTREC
EMERGENCY TELEPHONE . . . . . . : (800) 424-9300
---------------------------------------------------------------------------
SECTION 2 - COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
---------------------------------------------------------------------------
1
ORGANIC ACID PHOSPHATES
PCT BY WT: 50 - 75 VAPOR PRESSURE: 5.700 MMHG @ 68F
EXPOSURE LIMIT:
ACGIH TLV/TWA: TWA 1 mg/cu m
ACGIH TLV/STEL: STEL 3 mg/cu m
LD50: Oral, Rat- 2020 mg/kg
---------------------------------------------------------------------------
2
CAS# 108-95-2
PHENOL
PCT BY WT: 4.2000 VAPOR PRESSURE: .360 MMHG @ 68F
EXPOSURE LIMIT:
ACGIH TLV/TWA: TWA 5 ppm (Skin)
OSHA PEL/TWA: TWA 5 ppm (Skin)
LC50: Inhalation, Rat - 316 mg/cu m
LD50: Oral, Rat - 317 mg/kg
---------------------------------------------------------------------------
3
CAS# 71-36-3
BUTANOL
PCT BY WT: 37.0010 VAPOR PRESSURE: 4.400 MMHG @ 68F
EXPOSURE LIMIT:
ACGIH TLV/STEL: C 50 ppm (Skin) - STEL
OSHA PEL/TWA: 100 ppm - TWA
OSHA CEILING: PEL: 50 ppm (Skin)
LC50: Inhalation (Rat, 4 Hr.)- > 8000 ppm
LD50: Oral (Rat)- 2.5 g/kg
---------------------------------------------------------------------------
***************************************************************************
This product contains one or more Hazardous Air Pollutants.
***************************************************************************
***************************************************************************
This product contains no reported carcinogens or suspected carcinogens
according to the information provided in Section 3 of this MSDS.
---------------------------------------------------------------------------
INSL-X PRODUCTS CORPORATION
MATERIAL SAFETY DATA SHEET
276.099B
---------------------------------------------------------------------------
***************************************************************************
---------------------------------------------------------------------------
SECTION 3 - HAZARDS IDENTIFICATION
---------------------------------------------------------------------------
EFFECTS OF OVEREXPOSURE
EYES: Corrosive to eyes; causes eye burns.
SKIN: May irritate skin.
INGESTION: Swallowing can result in severe gastrointestinal irritation
nausea, and vomiting. Swallowing a large amount can be fatal.
INHALATION: May cause significant irritation to the lungs, upper
respiratory tract and nose.
TARGET ORGAN STATEMENT
May cause lung and gastrointestinal tract damage based on animal data.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
Conditions aggravated by exposure may include skin disorders and
respiratory (asthma-like) disorders.
PRIMARY ROUTE(S) OF ENTRY
Dermal, eye contact, inhalation.
CARCINOGENICITY
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen.
---------------------------------------------------------------------------
SECTION 4 - FIRST AID MEASURES
---------------------------------------------------------------------------
EMERGENCY FIRST AID:
EYE CONTACT: Flush at once with large amounts of lukewarm water for at
least 15 minutes and get medical attention.
SKIN CONTACT
Remove contaminated clothing. Wash exposed area with soap and
water. If symptoms persist, seek medical attention. Launder
clothing before reuse.
INHALATION: Remove from further exposure. Keep warm and at rest. If
cough or other symptoms develop, seek medical attention.
INGESTION: Wash out mouth with water and keep at rest. Seek immediate
medical attention.
NOTE TO PHYSICIAN:
Not Applicable.
---------------------------------------------------------------------------
SECTION 5 - FIRE FIGHTING MEASURES
---------------------------------------------------------------------------
FIRE AND EXPLOSIVE PROPERTIES OF THE CHEMICAL:
Flammability Classification . . . . . : FLAMMABLE LIQUID
Flashpoint . . . . . . . . . . . . . : 109.0 鳩
Explosion Level . . . . . . . . . . . : Low - 1.4
High - 11.2
---------------------------------------------------------------------------
INSL-X PRODUCTS CORPORATION
MATERIAL SAFETY DATA SHEET
276.099B
---------------------------------------------------------------------------
EXTINGUISHING MEDIA
Water spray, dry chemical, carbon dioxide (CO2), alcohol foam
FIRE FIGHTING PROCEDURES
For small containers of organic substances, there may be less damage
if the material is allowed to burn to exhaustion rather than fighting
the fire and risking environmental contamination and other problems.
FIRE FIGHTING EQUIPMENT
Respiratory and eye protection is required for fire fighting
personnel. Small outdoor fires may easily be extinguished with a
portable fire extinguisher.
---------------------------------------------------------------------------
SECTION 6 - ACCIDENTAL RELEASE MEASURES
---------------------------------------------------------------------------
SMALL SPILL:
Construct temporary dikes of dirt, sand, or any appropriate readily
available material to prevent spreading of this product.
Wearing the appropriate personal protective equipment, move the
leaking container(s) to a containment area or turn the container(s)
so that the opening is above the liquid level.
Absorb on diatomaceous earth or equivalent inert material. Shovel up
and dispose of at an appropriate waste disposal facility according to
current applicable laws and regulations.
LARGE SPILL:
Construct temporary dikes of dirt, sand, or any appropriate readily
available material to prevent spreading of the product.
Wearing the appropriate personal protective equipment, close or cap
valves &/or block or plug hole in leaking container and transfer to
another container. Contain product and call the local fire or
police department for immediate emergency assistance.
---------------------------------------------------------------------------
SECTION 7 - HANDLING AND STORAGE
---------------------------------------------------------------------------
HANDLING:
Use appropriate personal protective equipment (See Section 8).
Handle in a well-ventilated area. Handle and use in a manner
consistent with good industrial techniques and practices.
STORAGE:
Store in unopened containers under cool and dry conditions.
Do not store with, or close to oxidizers.
SPECIAL COMMENTS:
Do not take internally. Wash with soap and water before eating,
---------------------------------------------------------------------------
INSL-X PRODUCTS CORPORATION
MATERIAL SAFETY DATA SHEET
276.099B
---------------------------------------------------------------------------
drinking, smoking or using toilet.
---------------------------------------------------------------------------
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
---------------------------------------------------------------------------
VENTILATION
Provide sufficient mechanical (general and/or local exhaust)
ventilation to maintain exposure below TLV(s).
RESPIRATORY
Always wear NIOSH approved respiratory protective equipment when
vapor or mists may exceed applicable concentration limits.
EYE PROTECTION
Safety glasses, splash goggles or face shield. Contact lenses should
not be worn as eye protection but used with safety glasses, splash goggles
or face shield for full protection.
SKIN
To prevent any contact, wear impervious protective clothing such
as neoprene or butyl rubber gloves, apron, boots or whole bodysuit, as
appropriate.
WORK HYGIENIC PRACTICES
Facilities storing or using this material should be equipped with an
eyewash facility and a safety shower. Good personal hygiene practices
should always be followed.
---------------------------------------------------------------------------
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
---------------------------------------------------------------------------
Physical State . . . . . . . . . . . .: LIQUID
Vapor Pressure . . . . . . . . . . . : 5.70
Vapor Density . . . . . . . . . . . . : 3.24
Boiling Point Range . . . . . . . . . : Lower - 243.0 鳩
Higher - -N/A 鳩
Specific Gravity . . . . . . . . . . : 1.071
Weight per Volume . . . . . . . . . . : 8.9185 LB/GL
VOC - Total (lbs./gal). . . . . . . . : 4.611
Evaporation Rate . . . . . . . . . . .: .460 (n-Butyl Acetate = 1)
Volatile by Weight . . . . . . . . . : 51.7007
Volatile by Volume . . . . . . . . . : 65.3534
---------------------------------------------------------------------------
SECTION 10 - STABILITY AND REACTIVITY
---------------------------------------------------------------------------
STABILITY: Stable.
---------------------------------------------------------------------------
INSL-X PRODUCTS CORPORATION
MATERIAL SAFETY DATA SHEET
276.099B
---------------------------------------------------------------------------
INCOMPATIBILITY
Avoid contact with: strong oxidizing agents.
HAZARDOUS POLYMERIZATION
Will not occur.
CONDITIONS TO AVOID
Avoid heat and any source of ignition.
HAZARDOUS COMBUSTION PRODUCTS
Oxides of both carbon and phosphorus.
---------------------------------------------------------------------------
SECTION 11 - TOXICOLOGICAL INFORMATION
---------------------------------------------------------------------------
No data at this time.
---------------------------------------------------------------------------
SECTION 12 - ECOLOGICAL INFORMATION
---------------------------------------------------------------------------
No data at this time.
---------------------------------------------------------------------------
SECTION 13 - DISPOSAL CONSIDERATIONS
---------------------------------------------------------------------------
DISPOSAL METHOD
Dispose of waste at an appropriate waste disposal facility
according to current applicable laws and regulations.
---------------------------------------------------------------------------
SECTION 14 - TRANSPORT INFORMATION
---------------------------------------------------------------------------
PRIMARY HAZARD CLASS. . . . . . . : 8
SECONDARY HAZARD CLASS. . . . . . : 3
DOT LABEL . . . . . . . . . . . . : CORROSIVE/FLAMMABLE LIQUID
DOT PACKAGING GROUP . . . . . . . : PG II
DOT PLACARD . . . . . . . . . . . : CORROSIVE/FLAMMABLE LIQUID
UN/NA NUMBER . . . . . . . . . . .: UN2920
DOT SHIPPING NAME . . . . . . . . : CORROSIVE LIQUID, FLAMMABLE, N.O.S.
(BUTYL ALCOHOL/PHENYL ACID PHOSPHATE)
---------------------------------------------------------------------------
SECTION 15 - REGULATORY INFORMATION
---------------------------------------------------------------------------
U.S. FEDERAL REGULATORY INFORMATION
TSCA SECTION 8(b) - INVENTORY STATUS:
All components of this product are either listed on the U.S. Toxic
Substances Control Act (TSCA) inventory of chemicals or are otherwise
compliant with TSCA Regulations.
SARA 313 TOXIC CHEMICALS:
---------------------------------------------------------------------------
INSL-X PRODUCTS CORPORATION
MATERIAL SAFETY DATA SHEET
276.099B
---------------------------------------------------------------------------
This product contains the following substances subject to the
reporting requirements of Section 313 of Title III of the Superfund
Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
PHENOL
CAS# 108-95-2 PCT BY WT: 4.2000
---------------------------------------------------------------------------
BUTANOL
CAS# 71-36-3 PCT BY WT: 37.0010
---------------------------------------------------------------------------
---------------------------------------------------------------------------
SECTION 16 - OTHER INFORMATION
---------------------------------------------------------------------------
Prepared by . . . . . . . . . . . . . :
Date of issue . . . . . . . . . . . . : 12/15/2005
Last Revision Date . . . . . . . . . : 02/25/2005
MSDS Prepared for . . . . . . . . . . :
MSDS Last Prepared . . . . . . . . . : NONE
HMIS Rating: Health- 3 Flammability- 3
Reactivity- 0
***************************************************************************
This Material Safety Data Sheet conforms to the Hazard Communication
Standard, 29 CFR 1910.1200(g)(4).
The above information pertains to this product as currently formulated
and is based on the information available, as of this date. Addition of
reducers or other additives to this product may substantially alter the
composition and hazards of the product. Since conditions of use are out-
side our control, we make no warranties, express or implied, and assume
no liability in connection with any use of this information.
***************************************************************************
Abbreviations used: int.- interior; ext.- exterior; MSDS - Material Safety
Data Sheet; HMIS - Hazardous Materials Information System; CAS - Chemical
Abstracts Services; pct - percent; wt - weight; mm Hg - millimeters of
mercury; F - Fahrenheit; ACGIH - American Conference of Governmental
Industrial Hygienists; TLV - Threshold Limit Value; OSHA - Occupational
Safety and Health Administration; PEL - Permissible Exposure Limit; TWA -
Time-Weighted Average; STEL- Short Term Exposure Limit; N/A- Not applicable
IARC - International Agency for Research on Cancer; NE - Not established
NTP - National Toxicological Program; CFR - Code of Federal Regulations;
OSHA - Z 29CFR 1910, Subpart Z; VOC - Volatile Organic Compounds; TCC -
Tag Closed Cup; LEL - Lower Explosive Limit; Mg/m3 or Mg/Cu M - milligram
per cubic meter; mppcf - millions of particles per cubic foot; ppm - parts
per million; NIOSH - National Institute of Occupational Safety and Health;
MSHA - Mine Safety and Health Administration; CNS - Central Nervous System.
|