TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO. NOTE: CHEMTREC number is to be
used in the event of a chemical emergency
4500 LEE RD. involving a spill, leak, exposure or accident
CLEVELAND, OHIO 44128 involving chemicals.
All non-emergency questions should be directed to Customer Service at 1800-486-0480 for assistance.
Page: 1 of 14
Effective Date: 07/27/1998
Un ion Carbide urges each customer or recipient of this MSDS to study it carcfully to become aware of and
understand the hazards associated with the product. The reader should consider consulting reference works or
individuals who are experts in ventilation, toxicology, and fire prevention, as necessary or appropriate to use and
understand the data contained in this MSDS.
To promote safe handling, each customer or recipient should: 1) Notify its employees, agents, contractors and others
whom it knows or believes will use this material or the information in this MSDS and any other information
regarding hazards or safety; 2) Furnish this same information to each of its customers for the product; and 3)
Request its customers to notify their employees customers, and other users of the product of this information.
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
1.1 IDENTIFICATION
Product Name Hudson Diamond Extender (DE-2)
Chemical Name Denatured Ethanol
Chemical Family Alcohols
Common Name ANHYDROL?SOLVENT SPECIAL 190 Proof PM-4081
Formula Not Applicable (mixture)
Synonym Special Industrial Solvent, Government Formula AI
1.2 COMPANY IDENTIFICATION
Hudson Supply Company
4500 Lee Road
Cleveland, Ohio 44128
1.3 EMERGENCY TELEPHONE NUMBER
24 hours a day: 18004249300 (Chemtrec)
Number for non-emergency questions concerning MSDS (800) 486-0480
Additional information on this product may be obtained by calling the Union Carbide Corporation
Customer Service Center at 1-800-568-4000.
Copyright 1998, Union Carbide.
ANHYDROL?is a registered trademark of Union Carbide.
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
CLEVELAND, OHIO 44128
Product Name: HUDSON DIAMOND EXTENDER ( DE-2 )
PROOF PM-4081
Page: 2 of 14
Effective Date: 07/27/1998
2. COMPOSITION INFORMATION
Component Amount
CAS #
Ethanol 64-17-5 <=74.11%
Isopropanol 67-63-0 <= 8.75%
Water 7732-18-5 <= 6.55%
Methanol 67-56-1 <= 4.2%
Methyl isobutyl ketone 108-10-1 <= 0.89%
Ethylene glycol 107-21-1 <= 5.5%
3. HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Appearance Pink
Physical State Liquid
Odor Fragrant
Hazards of DANGER! HARMFUL OR FATAL IF SWALLOWED.
product FLAMMABLE.
HARMFUL IF INHALED.
HARMFUL IF ABSORBED THROUGH SKIN.
CAUSES EYE IRRITATION.
MAY CAUSE DISTURBANCES OF VISION BY
INHALATION.
MAY CAUSE DIZZINESS AND DROWSINESS.
MAY CAUSE HEART MUSCLE DAMAGE.
MAY CAUSE LIVER AND KIDNEY DAMAGE.
MAY CAUSE VISUAL DISTURBANCES AND BLINDNESS IF
SWALLOWED.
3.2 POTENTIAL HEALTH EFFECTS
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Effective Date: 07/271998
CLEVELAND, OHIO 44128
Effects of Single Acute Overexposure
Page 3 of 14
Inhalation May cause dizziness, drowsiness, disturbances of vision, and tingling, numbness, and shooting pains in
the hands and forearms. High vapor concentrations may cause a burning sensation in the nose and throat, and
stinging and watering in the eyes. At concentrations which cause irritation, dizziness, faintness. drowsiness, nausea,
and vomiting may also occur.
Eye Contact Liquid may cause discomfort in the eye with slight excess redness and possibly swelling of the
conjunctiva. May cause temporary superficial injury of the cornea.
Skin Contact Prolonged contact may cause defatting of the skin with possible reddening and itchiness.
Skin Absorption Prolonged or widespread contact may result in the absorption of potentially hamful amounts of
methanol
Swallowing May cause nausea, abdominal pain, vomiting, headache, dizziness, shortness of breath, weakness,
fatigue, leg cramps, restlessness, confusion, drunken behavior, visual disturbances, drowsiness, coma, and death.
There may be a delay of several hours between swallowing methanol and the onset of signs and symptoms. The
effects observed are in part due to acidosis and partially to cerebral edema. Visual effects include blurred vision,
diplopia, changes in color perception, restriction of visual fields, and complete blindness due to optic nerve mid
retinal injury. Ingestion of moderate quantities of methanol also produces metabolic acidosis. Onset of symptoms
may be delayed up to 48 hours. 60-200 ml of methanol is a fatal dose for most adults. Ingestion of as little as 10 ml
has caused blindness. With massive overdoses, liver, kidney and heart muscle injury have been described.
Chronic Overexposure
Effects of Repeated Overexposure Long-term repeated overexposure to methanol vapor concentrations or 3000
ppm or greater may allow a cumulative effect to occur with resulting nausea, vomiting, headache, ringing in the
ears, insomnia, trembling, unsteady gait, vertigo, clouded and double vision. Liver and/or kidney injury may occur.
Prolonged overexposure at levels of 800-1000 ppm may result in severe eye damage in some persons. Long term
repeated oral exposure to ethanol may result in the development of progressive liver injury with fibrosis.
Other Effects of Overexposure Repeated ingestion of ethanol by pregnant mothers has been shown to adversely
affect the central nervous system of the fetus, producing a collection of effects which together constitute the fetal
alcohol syndrome. These include mental and physical retardation, distrtrbances of learning, motor and language
deficiencies, behavioral disorders, and small size head.
Medical Conditions Aggravated by Exposure
Due to its defatting properties, methanol may aggravate an existing skin condition, e.g.,eczema. Due to its potential
for liver and kidney injury, methanol may aggravate existing liver and/or kidney diseases. Repeated exposure to
ethanol may aggravate liver injury produced from other causes.
3.3 POTENTIAL ENVIRONMENTAL EFFECTS See section 12 for Ecological Information
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
CLEVELAND, OHIO 44128 Effective Date: 07/27/1998
4. FIRST AID PROCEDURES Page: 4 of 14
4.1 INHALATION
Remove to fresh air. Give artificial respiration if not breathing. If breathing is difficult, oxygen may be given by
qualified personnel. Obtain medical attention.
4~2 EYE CONTACT
Immediately flush eyes with water and continue washing for several minutes. Remove contact lenses, if worn.
Obtain medical attention.
4.3 SKIN CONTACT
Remove contaminated clothing. Wash skin with soap and water. Obtain medical attention if contact has been
widespread and prolonged. or if irritation persists. Wash clothing before reuse.
4.4 SWALLOWING
If patient is fully conscious, give two glasses of water. Induce vomiting. This should be done only by medical or
experienced first-aid personnel. Obtain medical attention without delay. If medical advice is delayed and if the
person has swallowed a moderate volume of material (a few ounces), then give three to four ounces of hard liquor,
such as whiskey. For children, give proportionally less liquor, according to weight.
4.5 NOTES TO PHYSICIAN
The combination of visual disturbances, metabolic acidosis, and formic acid in the urine is evidence of methanol
poisoning. The therapeutic intravenous administration of ethanol (10 ml per hour) allows it to be preferentialty
oxidized and reduces production of methanol metabolites. Acidosis must be treated by means of intravenous sodium
bicarbonate, and methanol elimination may be increased by hemodialysis, as indicated. Treatment should be based
on blood methanol levels and acid-base balance. Folates may be administered to enhance the metabolism of
formaldehyde. 4-Methyl pyrazole has been suggested as an antidote: because of its alcohol dehydrogenase inhibiting
effects, it reduces the production of formate and the development of metabolic acidosis. However the value of this
antidote remains to be proven in humans.
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
CLEVELAND, OHIO 44128
5. FIRE FIGHTING MEASURES Page 5 of 14
5.1 FLAMMABLE PROPERTIES Effective Date: 07/27/1998
Flash Point - Closed Cup: Tag Closed Cup ASTM D 56 16C 61 0F
Flash Point - Open Cup: Tag Open Cup ASTM D 1310 23C 74F
Autoignition Temperature: Not currently available.
Flammable Limits In Air:
Lower 3.3%(V) (Ethanol) Upper 19.0%(V) (Ethanol)
5.2 EXTINGUISHING MEDIA
Apply alcohol-type or all-purpose-type foam by manufacturer's recommended techniques for large fires. Use carbon
dioxide or dry chemical media for small fires.
5.3 EXTINGUISHING MEDIA TO AVOID
No information currently available.
5.4 SPECIAL FIRE FIGHTING PROCEDURES
Use water spray to cool fire-exposed containers and structures.
5.5 SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Use self-contained breathing apparatus and protective clothing.
5.6 UNUSUAL FIRE AND EXPLOSION HAZARDS
Vapors form from this product and may travel or be moved by air currents and ignited by pilot lights, other flames,
smoking, sparks, heaters, electrical equipment, static discharges or other ignition sources at locations distant from
product handling point.
Vapors from this material may settle in low or confined areas or travel a long distance to an ignition source and flash
back explosively.
Static ignition hazard can result from handling and use. Electrically bond and ground all containers personnel and
equipment before transfer or use of material. Use proper bonding and grounding during product transfer as described
in National Fire Protection Association Document NFPA 77. This material may produce a floating fire hazard.
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Effective Date: 07/27/1998
CLEVELAND, OHIO 44128
5.7 HAZARDOUS COMBUSTION PRODUCTS
Burning can produce the following products: Carbon monoxide and/or carbon dioxide. Carbon monoxide is highly
toxic if inhaled; carbon dioxide in sufficient concentrations can act as an asphyxiant.
6. ACCIDENTAL RELEASE MEASURES Page: 6 of 14
Steps to be taken if Material is Released or Spilled:
Extinguish and do not turn on any ignition source until the area is determined to be free from fire or explosion
hazard. Small spills could be flushed with large amounts of water. Larger spills should be collected for disposal.
Observe government regulations.
Personal Precautions: Wear suitable: protective equipment. See Section 8.2 - Personal Protection.
7. HANDLING AND STORAGE
7.1 HANDLING
General Handling
Do not swallow.
Keep away from heat. sparks and flame.
Avoid breathing vapor.
Do not get in eyes, on skin, on clothing.
Keep container closed.
Use with adequate ventilation.
Vapor forms from this product and may travel or be moved by air currents and ignited by pilot lights, other flames,
smoking, sparks, heaters, electrical equipment, static discharges or other ignition sources at locations distant from
product handling point and may flashback explosively.
Wash thoroughly after handling.
FOR INDUSTRY USE ONLY.
Ventilation
General (mechanical) room ventilation is expected to be satisfactory where this product is stored and handled in
closed equipment. Spccial local ventilation is needed at points where vapors can escape to the workplace air.
Other Precautions
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 7 of 14
CLEVELAND, OHIO 44128
Vapor may settle in low or contined arcas, or travel a long distance to an ignition source and flash back explosively.
7.2 STORAGE
Effective Date: 07127/1998
Store at normal ambient temperatures.
18. EXPOSURE CONTROLS AND PERSONAL PROTECTION
8.1 EXPOSURE LIMITS
m State
Component Exposure Limits Skin
Ethanol 1000ppm TWA8 ACGIH
1880 mglm3 TWA8 ACGIH
1000 ppm TWA8 OSHA
1900 mg/m3 TWA8 OSHA
Methanol 200 ppm TWA8 ACGIH Yes
262 mg,rn3 TWA8 ACGIH Yes
250 ppm STEL ACOTH Yes
328 mg/m3 STEL ACGIH Yes
200 ppm TWA8 OSHA Yes
260 mg/m3 TWA8 OSRA Yes
250 ppm STEL OSRA Yes
325 mg/m3 STEL OSHA Yes
Isopropanol 400 ppm TWA8 ACGIH
983 mg/m3 TWA8 ACGIH
1230 mg/m3 STEL ACGIH
500 ppm STEL ACGIH
400 ppm TWA8 OSHA
980 mg/m3 TWA8 OSHA
1225 mg/m3 STEL OSHA
500 ppm STEL OSHA
Methyl isobutyl kctone 205 mg/m3 TWA8 ACGIH
50 ppm TWAS ACGIH
307 mg/m3 STEL ACGTH
75 ppm STEL ACGIH
205 mg/m3 TWA8 OSHA
50 ppm TWA8 OSHA
300 mg/mS STEL OSHA
75 ppm STEL
8.2 PERSONAL PROTECTION
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 8 of 14
CLEVELAND, OHIO 44128
Respiratory Protection: Use self-contained breathing apparatus in high vapor concentrations.
Ventilation: General (mechanical) room ventilation is expected to be satisfactory where this product is stored
and handled in closed equipment. Special local ventilation is needed at points where vapors can be expected to
escape to the workplace air.
Eye Protection: Effective Date: 07/27/1998
Safety glasses or monogoggles.
Protective Gloves: Neoprene or PVC-coated
Other Protective Eye bath, safety shower, chemical apron.
Equipment:
8.3 ENGINEERING CONTROLS
PROCESS HAZARD: Sudden release of hot organic chemical vapors or mists from process equipment
operating at elevated temperature and pressure, or sudden ingress of air into hot equipment under a
vacuum, may result in ignitions without the preseuce of obvious ignition sources. Published
"autoignition" or "ignition" temperature values cannot be treated as safe operating temperatures in
chemical processes without analysis of the actual process conditions. Any use of this product in elevated-
temperature processes should be thoroughly evaluated to establish and maintain safe operating
conditions. Further information is available in a Technical bulletin entitled "Ignition Hazards of Organic
Chemical Vapors."
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Appearance: Pink
pH: Not currently available.
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 9 of 14
CLEVELAND, OHIO 44128
Solubility in Water (by weight); 20C Effective Date: 07/27/1998
100%
Odor: Fragrant
Flash Point - Closed Cup; Tag Closed Cup ASTM D 56 160C 610F
Flash Point - Open Cup: Tag Open Cup ASTM D 131O 74F
230C
Percent Volatiles: 100 Wt%
Boiling Point (760 mmHg): 171.30 0F
77.38 0C
Freezing Point: <-900C <-1300F
Specific Gravity (H20 = 1): 0.80910 20C /20C
Vapor Pressure at 200C: 5.81kPa 43.6 mmHg
Vapor Density (air = 1) 1.5
Evaporation Rate (Butyl Acetate = 1): 3.20
Melting Point: Not applicable.
10. STABILITY AND REACTIVITY
10.l STABILITY/ INSTABILITY Stable
Incompatible Materials: Strong oxidizing agents. Strong inorganic acids.
10.2 HAZARDOUS POLYMERIZATION Will Not Occur.
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 1O of 14
CLEVELAND, OHIO 44128
10.3 INHIBITORS/STABILIZERS Not applicable.
10. TOXICOLOGICAL INFORMATION Effective Date: 07/27/1998
SIGNIFICANT DATA WITH POSSIBLE RELEVANCE TO HUMANS
The international Agency for Research On Cancer (IARC) has determined that the consumption of alcoholic beverages is
causally related to the occurrence of malignant tumors of the oral cavity, pharynx, larynx, esophagus and liver in humans. The
carcinogenic response attributed to drinking alcoholic beverages has not been verified in
studies with laboratory animals. Established uses of denatured ethanol and non-beverage uses of pure ethanol are not
considered to pose any significant cancer hazard. Eihanol has been shown to have a weak skin sensitizing potential in a vcry small
percentage of the population.
12. ECOLOGICAL INFORMATION
12.1 ENVIRONMENTAL FATE
Partial information may be available, call Union Carbide.
12.2 ECOTOXICITY
Partial information may be available, call Union Carbide.
FURTHER INFORMATION NONE
12.3
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 11 of 14
CLEVELAND, OHIO 44128
13. DISPOSAL CONSIDERATIONS
13.1 WASTE DISPOSAL METHOD
Incinerate in a furnace where permitted under Federal, State, and local regulations. Dispose in accordance with all
applicable Federal, State, Provincial, and local environmental regulations. empty containers should be recycled or
disposed of through an approved waste management facility.
13.2 DISPOSAL CONSIDERATlONS
Sec Section 13.1
Disposal methods identified are for the product as sold. For proper disposal or used material, an assessment must be completed
to determine the proper and permissible waste management options permissible under applicable rules. regulations and/or laws
governing your location.
14. TRANSPORT INFORMATION
14.1 U.S. D.O.T.
NON-BULK
Proper Shipping Name: ETHANOL SOLUTIONS
Technical Name:
ID Number: UN1170
Hazard Class : 3
Packing Group : PG II
BULK
Proper Shipping Name : ETHANOL SOLUTIONS
Technical Name
ID Number: UN1170
Hazard Class : 3
Packing Group : PG II
This information is not intended to convey all specific regulatory or operational requirements information relating to this product.
Additional transportation system information can be obtained through your UCC sales or customer service representative. It is the
responsibility or the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the
material.
15. REGULATORY INFORMATION
15.1 FEDERAL/NATIONAL
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 12 of 14
CLEVELAND, OHIO 44128
The following components of this product are specifically listed as hazardous substances in 40 CFR 302.4 (unlisted
hazardous substances are not identified) and are present at levels which could require reporting.
Component CAS# Amount
Methanol 67-56-1 <=4.2000%
Methyl isobutyl ketone 108-10-1 <=0.0890%
Acetaldehyde 75-07-0 <=0.0010%
Acetone 67-64-1 <=0.0002%
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III SECTIONS 302 AND 304
The following components of this product are listed as extremely hazardous substances in 40 CFR Part 355 and are present at
levels which could require reporting and emergency planning:
None.
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III SECTION 313
The following components of this product are listed as toxic chemicals in 40 CFR 372.65 and are present at levels which could
require reporting and customer notification under Section 313 and 40 CFR Part 372;
Component CAS# Amount
Methanol 67-56-1 <=4.2000%
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III SECTIONS 311 AND 312
Delayed Hazard: Yes
Fire Hazard : Yes
Immediate Health Hazard : Yes
Reactive Hazard: No
Sudden Release of Pressure Hazard : No
TOXIC SUBSTANCES CONTROL ACT (TSCA)
All components of this product arc on the TSCA Inventory or are exempt from TSCA inventory requirements.
15.2 STATE/LOCAL
PENNSYLVANIA WORKER AND COMMUNITY RIGHT-TO-KNOW ACT
This product is subject to the Worker and Community kight-t~Know Act. The following components of this product are ar levels
which could require identification in the MSDS:
Component CAS# Amount
Ethanol 64-17-5 <=79.6100%
Isopropanol 67-63-0 <=8.7500%
Methanol 67-56-1 <=4.2000%
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Pages: 13 of 14
CLEVELAND, OHIO 44128
MASSACHUSETTS (HAZARDOUS SUBSTANCE DISCLOSURE BY EMPLOYERS)
The following components of this product appear on the Massachusetts Substance List and are present at levels which could
require identiflcation in the MSDS:
Component CAS# Amount
Ethanol 64-17-5 <--79.6l00%
Isopropanol 67-63-0 <=8.1500%
Methanol 67-56-1 <=4.2000%
Acetaldehyde 75-07-0 <=-.0010%
NEW YORK (HAZARDOUS SUBTANCES BULK STORAGE ACT)
NEW YORK STATE BULK STORAGE REGULATIONS (6 NYCRR Parts 595-599) This product is covered
by 6 NYCRR for Bulk Storage and Release Reporting and Response. Technical guidance and reommended practices are as
follows: - MATERIALS OF CONSTRUCTION Suitable materials of construction are: Steel, stainless steel, baked phenolic
lined steel, galvanized steel, copper, and copper alloy.
- Materials not to be used: Aluminum. Plastics are not recommended for flammable liquids. - STORAGE
SYSTEM DESIGN Design should comply with applicable industry, Federal and local codes for a Class 1B
Flammable liquid with regards to mechanical, electrical, safety and health components. Should also comply with
NYS/DEC Chemical Bulk Storage regulations Parts 598.l,598.2,598.3, and 598.5 (for existing tanks) or Parts 599.1
and 599.10 (for new or substantially modified tanks). - CONDITIONS FOR STORAGE Stow at normal ambient
temperatures. - INSPECTION AND MAINTENANCE A testing/inspection program which ensures structural
integrity and proper system operation should be established. Inspection and maintenance procedures and testing
of equipment should comply with NYS/DEC regulations Pat,ts 598.6 to 598.10.-TRANSFER AND
UNLOADING These operations should comply with NYS/DEC regulations, Part 598.4.
CALIIFORNIA PROPOSITION 65 (SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT OF 1986)
This product contains the following chemical(s) known to the State of California to cause cancer:
Component Amount
CASM
75-07-0 <=0.0010%
Acetaldehyda
CALIFORNIA SCAOMD RULE 443.1 (SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT RULE
443.1, LABELING OF MATERIALS CONTAINING ORGANIC SOLVENTS)
TM
MSDS HUDSON
Material Safety Data Sheet
HUDSON SUPPLY CO.
4500 LEE RD.
Page: 14 of 14
CLEVELAND, OHIO 44128
This section provides selected regulatory information on this product including its components. This is not intended to include all
regulations. It is the responsibiliIy of the user to know and comply with all applicable rules regulations and laws relating to the
product being used.
16. OTHER INFORMATION
16.1 AVAILABLE LITERATURE AND BROCHURES
ADDITIONAL INFORMATION: There may be additional product safety information on this product, which may be obtained by
calling your Union Carbide Corporation Sales or Customer Service Contact.
16.2 SPECIFIC HAZARD RATING SYSTEM
HMIS ratings for this product are: H-2 F-3 S-0
NFPA ratings for this product are: H-1 F-3 S-0
These ratings are part of speciflc hazard communications program(s) and should be disregarded where individuals are not trained
in the use of these hazard rating systems. You should be familiar with the hazard communication applicable to your workplace.
16.3 RECOMMENDED USES AND RESTRICTIONS
FOR INDUSTRY USE ONLY
Hudson Supply Company's knowledge as of the date hereof and is designed to assist our
customers; however, Hudson Supply Company makes no representation as to its
completeness or accuracy. Our products are intended for sale to industrial
and commercial customers. We require customers to inspect and test our
products before use and to satisfy themselves as to suitability for their
specific applications. Any use which Hudson Supply Company customers or third parties
make of this information, or any reliance on, or decisions made based upon
it, are the responsibility of such customer or third party. Hudson Supply Company
disclaims responsibility for damages, or liability, of any kind resulting
from the use of this information. THERE ARE NO WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS INFORMATION OR TO
THE PRODUCT IT DESCRIBES. IN NO EVENT SHALL HUDSON SUPPLY COMPANY BE LIABLE FOR
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
|