Permatex, A Brand of ITW Devcon
30 Endicott St.
Danvers, MA 01923 USA
Telephone:978-777-1100
Emergency: 800-424-9300
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 21425 FAST CURE EPOXY PART 1
Item No: 150345E
Product Type: Epoxy
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients Percent ACGIH 8 Hr. TWA: OSHA 8 Hr. TWA:
BISPHENOL 40-50 Not Listed Not Listed
A/EPICHLOROHYDRIN BASED
EPOXY RESIN
25068-38-6
10 mg/m3 15 mg/m3 total dust, 5 mg/m3
ALUMINUM OXIDE 40-50
1344-28-1 respir.
10 mg/m3 10 mg/m3; 15 mg/m3 total dust
TITANIUM DIOXIDE 1-10
13463-67-7
10 mg/m3 TWA 6 mg/m3 TWA
SILICON DIOXIDE, AMORPHOUS 1-10
112945-52-5
3. HAZARDS IDENTIFICATION
Note: This product does not contain microcyrstalline silica. May cause eye and skin irritation.
Toxicity:
Repeated or prolonged exposure by ingestion may cause delayed effects involving the blood,
gastrointestinal, nervous and reproductive systems. May be a potential human skin carcinogen.
Eye and skin contact, ingestion, inhalation.
Primary Routes of Entry:
Signs and Symptoms of Exposure: Repeated skin contact may cause allergic skin reactions.
Ingredients Percent NTP: ACGIH IARC:
Carcinogens
ALUMINUM OXIDE 40-50 Group A4
1344-28-1
TITANIUM DIOXIDE 1-10 Group 3; Vol 47, pg 307,
13463-67-7 1989
SILICON DIOXIDE, AMORPHOUS 1-10 Not listed Not listed Amorphous Silica, Group 3:
112945-52-5 Vol. 68: 1997
Medical Conditions Recognized as None known
Being Aggravated by Exposure:
4. FIRST AID MEASURES
If swallowed, induce vomiting. Obtain medical attention.
Ingestion:
If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If
Inhalation:
breathing is difficult give oxygen. Get medical attention..
Remove contaminated clothing. Wash area with soap and water. If irritation persists, seek medical
Skin Contact:
attention.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
Eye Contact:
attention if irritation persists.
5. FIRE FIGHTING MEASURES
More than 200 degrees F. Method: Tag Closed Cup
Flash Point (癋/C):
Carbon Dioxide, Dry Chemicals, Foam.
Recommended Extinguishing Media:
Firefighters should wear self-contained breathing apparatus.
Special Fire-Fighting Procedures:
Irritating vapors.
Hazardous Products Formed by Fire or Thermal
Decomposition:
None
Unusual Fire/Explosion Hazards:
Not determined
Lower Explosive Limit:
Not determined
Upper Explosive Limit:
1 of 3
Product name: 21425 FAST CURE EPOXY PART 1 Item 150345E
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal.
7. HANDLING AND STORAGE
Store below 100 degrees F.
Storage:
Avoid prolonged skin contact. Keep away from eyes.
Handling:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses or goggles.
Eyes:
Rubber or plastic gloves
Skin:
General ventilation is usually adequate.
Ventilation:
An approved respirator (i.e. NIOSH, etc.) should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
White paste
Appearance:
MILD
Odor:
Not determined
Boiling Point (癋):
Does not apply
pH:
Slight
Solubility in Water:
1.68
Specific Gravity:
Not determined
VOC Content(Wt.%):
Less than 5 mm Hg
Vapor Pressure:
Not Determined
Vapor Density (Air=1):
Not Determined
Evaporation Rate:
10. STABILITY AND REACTIVITY
Stable at normal conditions
Chemical Stability:
Will not occur
Hazardous Polymerization:
None known
Incompatabilities:
Heat.
Conditions to Avoid:
Irritating vapors.
Hazardous Products Formed by Fire or Thermal
Decomposition:
11. TOXICOLOGICAL INFORMATION
See Section 3
12. ECOLOGICAL INFORMATION
No data available
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations.
NH - Not a RCRA Hazardous Waste Material
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
Unrestricted
DOT Shipping Name:
NONE
Hazard Class:
None
UN/ID Number:
None
Marine Pollutant:
IATA
Unrestricted
Proper Shipping Name:
None
Class or Division:
None
UN/NA Number:
IMDG
Unrestricted
Proper Shipping:
2 of 3
Product name: 21425 FAST CURE EPOXY PART 1 Item 150345E
None
Hazard Class:
None
UN Number:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
SARA 313 Information
NONE
CALIFORNIA PROP 65:
WARNING: This product contains a chemical known to the State of California to cause cancer.
TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 1, FLAMMABILITY 1, INSTABILITY 1
Estimated NFPA Rating:
HEALTH 1, FLAMMABILITY 1, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Health and Safety Manager
Prepared By: Revision Date: 02/05/2004
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 1
Company: Revision
06106 Number:
Telephone Number: 1-87-Permatex (877) 376-2839
3 of 3
Permatex, A Brand of ITW Devcon
30 Endicott St.
Danvers, MA 01923 USA
Telephone: 978-777-1100
Emergency: 800-424-9300
Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
Product Name: 21425 FAST CURE EPOXY PART 2
Item No: 150445E
Product Type: Epoxy
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients Percent ACGIH 8 Hr. TWA: OSHA 8 Hr. TWA:
10 mg/m3 15 mg/m3 total dust, 5 mg/m3
ALUMINUM OXIDE 40-50
1344-28-1 respir.
POLYMERCAPTAN 30-40 Not Listed Not Listed
101359-87-9
DISTILLATES 1-10 Not Listed Not Listed
(PETROLEUM),HEAVY THERMAL
CRACKED
64741-81-7
2,4,6- 1-10 Not Listed Not Listed
TRIS(DIMETHYLAMINOMETHYL)P
HENOL
90-72-2
STYRENE 1-10 50 ppm TWA (skin); 100 PPM 50 ppm TWA; 100 ppm STEL
100-42-5 STEL
100 mg/m3
ETHYLENE GLYCOL 1-10 50 ppm
107-21-1
10 mg/m3 TWA 6 mg/m3 TWA
SILICON DIOXIDE, AMORPHOUS 1-10
112945-52-5
BENZO[A]ANTHRACENE 0.1-1.0 Not Listed Not Listed
56-55-3
3. HAZARDS IDENTIFICATION
Note: This product does not contain microcyrstalline silica. May cause eye and skin irritation.
Toxicity:
Repeated or prolonged exposure by ingestion may cause delayed effects involving the blood,
gastrointestinal, nervous and reproductive systems. May be a potential human skin carcinogen.
Eye and skin contact, ingestion, inhalation.
Primary Routes of Entry:
Signs and Symptoms of Exposure: Repeated skin contact may cause allergic skin reactions.
Ingredients Percent NTP: ACGIH IARC:
Carcinogens
ALUMINUM OXIDE 40-50 Group A4
1344-28-1
STYRENE 1-10 male rat-negative; A4 - Not Classifiable Group 2B; Vol. 60, pg. 233,
100-42-5 female rat-negative; as a Human 1994
male mice-equivocal; Carcinogen
female mice-negative
ETHYLENE GLYCOL 1-10 male mice-no A4 - not classifiable
107-21-1 evidence; female as a human
mice-no evidence carcinogen
SILICON DIOXIDE, AMORPHOUS 1-10 Not listed Not listed Amorphous Silica, Group 3:
112945-52-5 Vol. 68: 1997
BENZO[A]ANTHRACENE 0.1-1.0 Suspect Carcinogen; A2-suspected human Monograph 32, Supplement
56-55-3 (under Polycyclic carcinogen 7; 1987; (Overall evaluation
Aromatic upgraded from 2B to 2A with
Hydrocarbons) supporting evidence from
other data relevant to the
evaluation of carcinogenicity
and its mechanisms)
Medical Conditions Recognized as None known
Being Aggravated by Exposure:
1 of 3
Product name: 21425 FAST CURE EPOXY PART 2 Item 150445E
4. FIRST AID MEASURES
If swallowed, induce vomiting. Obtain medical attention.
Ingestion:
If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If
Inhalation:
breathing is difficult give oxygen. Get medical attention..
Remove contaminated clothing. Wash area with soap and water. If irritation persists, seek medical
Skin Contact:
attention.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
Eye Contact:
attention if irritation persists.
5. FIRE FIGHTING MEASURES
More than 200 degrees F. Method: Tag Closed Cup
Flash Point (癋/C):
Carbon Dioxide, Dry Chemicals, Foam.
Recommended Extinguishing Media:
Firefighters should wear self-contained breathing apparatus.
Special Fire-Fighting Procedures:
Irritating vapors.
Hazardous Products Formed by Fire or Thermal
Decomposition:
None
Unusual Fire/Explosion Hazards:
3.2 Ethylene glycol
Lower Explosive Limit:
15.3 Ethylene glycol
Upper Explosive Limit:
6. ACCIDENTAL RELEASE MEASURES
Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until
Spill Procedures:
disposal.
7. HANDLING AND STORAGE
Store below 100 degrees F.
Storage:
Avoid prolonged skin contact. Keep away from eyes.
Handling:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Safety glasses or goggles.
Eyes:
Rubber or plastic gloves
Skin:
General ventilation is usually adequate.
Ventilation:
An approved respirator (i.e. NIOSH, etc.) should be worn when exposures are expected to exceed the
Respiratory Protection:
applicable limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Black paste
Appearance:
DISAGREEABLE
Odor:
Greater than 300 degrees F.
Boiling Point (癋):
Does not apply
pH:
Slight
Solubility in Water:
1.4
Specific Gravity:
Not determined
VOC Content(Wt.%):
Less than 5 mm Hg
Vapor Pressure:
Not Determined
Vapor Density (Air=1):
Not Determined
Evaporation Rate:
10. STABILITY AND REACTIVITY
Stable at normal conditions
Chemical Stability:
Will not occur
Hazardous Polymerization:
None known
Incompatabilities:
Heat
Conditions to Avoid:
Irritating vapors.
Hazardous Products Formed by Fire or Thermal
Decomposition:
11. TOXICOLOGICAL INFORMATION
See Section 3
12. ECOLOGICAL INFORMATION
No data available
2 of 3
Product name: 21425 FAST CURE EPOXY PART 2 Item 150445E
13. DISPOSAL CONSIDERATIONS
Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations.
NH - Not a RCRA Hazardous Waste Material
US EPA Waste Number:
14. TRANSPORTATION INFORMATION
DOT (49CFR 172)
Domestic Ground Transport
Unrestricted
DOT Shipping Name:
NONE
Hazard Class:
None
UN/ID Number:
None
Marine Pollutant:
IATA
Unrestricted
Proper Shipping Name:
None
Class or Division:
None
UN/NA Number:
IMDG
Unrestricted
Proper Shipping:
None
Hazard Class:
None
UN Number:
15. REGULATORY INFORMATION
SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical.
SARA 313 Information
STYRENE, ETHYLENE GLYCOL, BENZO(A)ANTHRACENE
CALIFORNIA PROP 65:
WARNING: This product contains a chemical known to the State of California to cause cancer.
TSCA Inventory Status:
Listed on Inventory: YES All components of this product are listed (or exempt) on the EPA TSCA inventory.
16. OTHER INFORMATION
HEALTH 2, FLAMMABILITY 1 , REACTIVITY 1
Estimated NFPA Rating:
HEALTH 2, FLAMMABILILTY 1, PHYSICAL HAZARD 0
Estimated HMIS Classification:
NFPA is a registered trademark of the National Fire Protection Assn.
HMIS is a registered trademark of the National Paint and Coatings Assn.
Denise Boyd, Health and Safety Manager
Prepared By: Revision Date: 02/05/2004
Permatex. Inc. 10 Columbus Blvd. Hartford, CT USA 2
Company: Revision
06106 Number:
Telephone Number: 1-87-Permatex (877) 376-2839
3 of 3
|