MATERIAL SAFETY DATA SHEET
Staycell ONE STEPTM 255, Component B
1. Product and Company Identification
Manufacturer Emergency Contacts & Phone Number
Manufacturer
CHEMTREC: 800-424-9300
Preferred Solutions, Inc.
7819 Broadview Road
Cleveland, OH 44131
Company Contact: Jack S. Stahl
Telephone Number: 800-522-4522
Fax Number: 216-642-1166
Revised Date: 05/26/09
Product Name: Staycell ONE STEPTM 255, Component B
2. Composition/Information On Ingredients
Percent of
Ingredient Name CAS Number Total Weight
1,1,1,3,3-pentafluoropropane (HFC-245fa) 460-73-1 5-10
Tertiary Amine Catalyst 1-5
2-dimethylaminoethanol 108-01 1-5
Dipropylene Glycol 25265-71-8 <2
Ethylene Glycol 107-21-1 2-5
Polyol 60-75
3. Hazards Identification
Emergency Overview
Caution: May cause eye, skin and respiratory tract irritation. Sensitizer. May cause liver, kidney and
reproductive harm
Primary Routes(s) of Entry
Skin & Eye Contact, Inhalation.
Eye Hazards
May cause eye irritation. Irritation may be severe, causing burns and leading to permanent eye damage.
Skin Hazards
May cause skin irritation. Irritation may be severe resulting in burns to the skin from prolonged contact. A
minor constituent in this product is in a class of compounds that may cause cholinesterase inhibition.
Symptoms of such inhibition may include salivation, sweating, headache, nausea and abdominal cramps.
Ingestion Hazards
Harmful if swallowed. Ingestion may cause: corrosive lesions of the mouth, throat and esophagus,
gastrointestinal upset, nausea and vomiting, abdominal pain, central nervous system depression and
neurological disorders. Ingestion may result in injury to the liver and kidneys.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15
minutes. Get medical attention immediately. Remove contact lenses, if worn.
Skin
Remove contaminated clothing and shoes. In case of contact, immediately flush skin with plenty of water
for at least 15 minutes. If irritation develops seek medical attention.
1
MATERIAL SAFETY DATA SHEET
Staycell ONE STEPTM 255, Component B
Ingestion
Rinse mouth and drink plenty of water. Do not induce vomiting. Immediate medical attention required.
Inhalation
Remove the person from the contaminated area to fresh air. If breathing is difficult, give oxygen. If not
breathing, give artificial respiration. Get medical attention immediately.
5. Fire Fighting Measures
Flash Point: Above 200?F.
Fire and Explosion Hazards
Thermal decomposition (burning) may release irritating, corrosive and/or toxic gases, vapors and fumes.
Closed containers may explode when heated due to increased pressure. Do not puncture, cut open or
reuse empty containers.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire. Water spray or fog, carbon dioxide
(CO2), dry chemical, alcohol foam.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate personal protective equipment (PPE). Contain and/or
absorb spill with inert material (e.g. sand, vermiculite). Collect and dispose. Avoid runoff to waterways
and sewers.
7. Handling and Storage
Handling and Storage Precautions
Keep containers tightly sealed and stored at 50?to 75癋 for maximum shelf life. Storage temperatures
must not exceed 85癋. Do not store in direct sunlight. Open the container slowly to allow any pressure to
be released before removing the bung. Keep drums tightly sealed when not in use to avoid
contamination. Water, solvents or oil in the liquid components will degrade foam quality. Protect from
heat, sparks and open flame. Do not cut or weld on or near this container. Do not smoke near container.
Do not store near food or feed.
Shelf Life
Staycell ONE STEPTM 255, Component B is stable for two (2) months when stored in tightly sealed drums
at 50?to 75癋.
8. Exposure Controls/Personal Protection
9. Physical and Chemical Properties
Appearance: Amber colored liquid
Odor: Low, slight aromatic
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 1.2 at 70?F.
pH Factor: 7-10
Solubility: moderate in water
10. Stability and Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials: Avoid contact with strong oxidizing agents, acids.
Hazardous Decomposition Products: Toxic and irritating gases, vapors or fumes of: carbon monoxide
(CO), carbon dioxide (CO2), oxides of nitrogen, hydrogen fluoride, aldehydes, ketones
11. Toxicological Information
2
MATERIAL SAFETY DATA SHEET
Staycell ONE STEPTM 255, Component B
12. Ecological Information
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Avoid/prevent
release to the environment.
14. Transport Information
Not Regulated - Resin Compound
15. Regulatory Information
CERCLA RQ CAS Number Chemical Name
5000 lbs 107-21-1 ethyleneglycol
SARA 313 CAS Number Chemical Name
107-21-1 ethyleneglycol
State Regulations: CAS Number Chemical Name State RTK
108-01-0 2-dimethylaminoethanol MA, NJ, PA
Sara Hazard Classes
Acute Health Hazard
California - Proposition 65:
This product contains a chemical(s) known to the State of California to cause cancer.
16. Other information
HMIS III
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
PERSONAL PROTECTION
HMIS uses a numbering scale ranging from 0 to 4 to indicate the degree of hazard. A value of zero
means that the substance possesses essentially no hazard; a rating of four indicates high hazard
Disclaimer:
The data presented herein is not intended for use by nonprofessional applicators, or those persons who do not purchase or utilize
this product in the normal course of their business. The potential user must perform any pertinent tests in order to determine the
product's performance and suitability in the intended application, since final determination of fitness of the product for any particular
use is the responsibility of the buyer. All guarantees and warranties as to products supplied by Preferred Solutions, Inc. shall have
only those guarantees and warranties expressed in writing by the manufacturer. The buyer's sole remedy as to any material claims
will be against the applicator of the product. The aforementioned data on this product is to be used as a guide and is subject to
change without notice. The information herein is believed to be reliable, but unknown risks may be present. NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING PATENT WARRANTIES OR WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
USE, ARE MADE BY PREFERRED SOLUTIONS, INC. WITH RESPECT TO OUR PRODUCTS OR INFORMATION SET FORTH
HEREIN. To the best of our knowledge, the technical data contained herein is true and accurate at the date of issuance and is
subject to change without prior notice. User must contact Preferred Solutions, Inc. to verify correctness before specifying or
ordering. No guarantee of accuracy is given or implied. We assume no responsibility for coverage, performance or injuries resulting
from use. Liability, if any, is limited to replacement of product. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE
BY PREFEERED SOLUTIONS, INC., EXPRESS OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE,
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
3
|