MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 1
--------------------------------------------------------------------------------
=====================================================================
SECTION I - PRODUCT AND COMPANY INFORMATION
=====================================================================
Product Name: TACC FA561M ONE WAY BONDING ADHESIVE
CAS Number: MIXTURE
Hazard Rating: Health: 2 Fire: 3 Reactivity: 0 PPI: B
Company Identification: ITW TACC
AIR STATION INDUSTRIAL PARK
ROCKLAND MA 02370
Telephone/Fax: (781) 878-7015 (781) 871-6727
Chemtrec (24 Hour): (800) 424-9300
Trade Name: TACC FA561M
Product Code: FA561M
DOT Hazard Class 3
UN Number: 1133
Shipping Name: ADHESIVES
Packing Group: II
TACC is a registered trademark of Illinois Tool Works, Inc.
=====================================================================
SECTION II - HAZARDOUS INFORMATION
=====================================================================
Ingredient Name CAS Number Percent TSCA
ACETONE 67-64-1 35-60 Y
TOLUENE 108-88-3 10-30 Y
ACRYLONITRILE BUTADIENE 107-13-1 <0.5 Y
=====================================================================
SECTION III - PHYSICAL DATA
=====================================================================
Appearance/Color: LIGHT AMBER
Boiling Range: 133. F
Evaporation Rate: Faster than n-Butyl Acetate
% Volatile Weight: 54.3%
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 2
--------------------------------------------------------------------------------
% Volatile Volume: Not Available
Specific Gravity: 0.89584
Weight/Volume Measure: 7.47
EPA Method 24 VOC: 234.1 g/L
Photo Chem Reactive Only VOC: 127.7
=====================================================================
SECTION IV - FIRE AND EXPLOSION HAZARD DANGER
=====================================================================
Flammability Class: IB
Flash Range: -0.4 F
Explosive Range: 1.1%
12.8%
EXTINGUISHING MEDIA:
Use NFPA Class B fire extinguishers (carbon dioxide, all
purpose dry chemical or alcohol foam) designed to extinguish
flammable liquid fires. Polymer foam is preferred for large fires.
SPECIAL FIREFIGHTING PROCEDURES:
Water may be ineffective, but may be used to cool exposed
containers to prevent pressure build-up and possible auto-
ignition or explosion when exposed to extreme heat. If water
is used, fog nozzles are preferable.
UNUSUAL FIRE & EXPLOSION HAZARDS:
Vapors are heavier than air and may travel to an ignition source
distant from the material handling point.
=====================================================================
SECTION V - HEALTH HAZARD DATA
=====================================================================
PERMISSIBLE EXPOSURE LEVEL:
SEE SECTION VIII.
EFFECTS OF OVEREXPOSURE:
INGESTION: Can cause gastrointestinal irritation, nausea and
vomiting. Aspiration of material into lungs may cause chemical
pneumonitis which can be fatal.
INHALATION: May cause nose or throat irritation. High concen-
trations may cause acute central nervous system depression
characterized by headaches, dizziness, nausea and confusion.
EYES: May cause severe eye irritation and corneal damage.
SKIN: May cause dermatitis. May cause defatting and irrita-
tion of the skin.
FIRST AID:
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 3
--------------------------------------------------------------------------------
EYES: Flush eyes with water for 15 minutes. If irritation
or redness persist, seek immediate medical attention.
SKIN: Remove contaminated clothing and cleanse thoroughly
with soap and water. Seek medical attention if redness,
blistering or swelling occur.
INHALATION: Remove to fresh air.
INGESTION: Drink two or three cups of milk or water. Seek
medical advice.
=====================================================================
SECTION VI - REACTIVITY DATA
=====================================================================
Stability: This product is stable
Hazardous Polymerization: Hazardous polymerization will not occur
INCOMPATIBILITY:
Strong oxidizing agents.
CONDITIONS TO AVOID:
Open flames, high heat.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon monoxide, carbon dioxide.
=====================================================================
SECTION VII - SPILL OR LEAK PROCEDURES
=====================================================================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Keep spectators away. Eliminate all ignition sources (flames,
hot surfaces and sources of electrical, static or frictional
sparks). Dike and contain spill with inert material (e.g. sand,
earth). Transfer liquids to covered metal containers for
recovery or disposal, or remove with inert absorbent. Use only
non-sparking tools. Place absorbent diking materials in
covered metal containers for disposal. Prevent contamination of
sewers, streams and groundwater with spilled material or used
absorbent.
WASTE DISPOSAL METHOD:
Dispose in accordance with federal, state and local regulations.
=====================================================================
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
=====================================================================
Occupational Exposure Limits:
ACGIH TLV ACGIH TLV-C ACGIH STEL OSHA STEL OSHA PEL
ACETONE
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 4
--------------------------------------------------------------------------------
500.00 PPM N/est 750.00 PPM N/est 1000.00 PPM
TOLUENE
50.00 PPM N/est N/est N/est 200.00 PPM
ACRYLONITRILE BUTADIENE
2.00 PPM N/est N/est N/est 2.00 PPM
RESPIRATORY PROTECTION:
If workplace exposure limit of product is exceeded, a NIOSH/MSHA
approved air supplied respirator must be used in absence of proper
environmental control. Engineering or administrative controls
should be implemented to reduce exposure.
VENTILATION:
Provide sufficent mechanical (general and/or local exhaust)
ventilation to maintain exposure below PEL.
PROTECTIVE GLOVES:
Chemical resistant gloves.
EYE PROTECTION:
Chemical splash goggles in compliance with OSHA regulations are
advised.
OTHER PROTECTIVE EQUIPMENT:
To prevent repeated, prolonged skin contact, wear impervious
clothing and boots.
=====================================================================
SECTION IX - SPECIAL PRECAUTIONS
=====================================================================
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
Keep container closed when not in use. Store at 60-95 degrees F
and out of the sun. Use adequate ventilation to avoid breath-
ing vapors when cover is removed. Ground all equipment when
handling flammable solventborne materials.
OTHER PRECAUTIONS:
For professional or industrial use only. Follow label instructions.
Keep out of the reach of children. Not for consumption. No smoking.
Do not breathe fumes. Avoid contact with body. Turn off all pilot
lights, flames, stoves, heaters, electric motors, welding equipment
and other sources of ignition. Close all containers when not in use.
Empty containers must not be washed and re-used for any purpose.
Contact lens wearers take appropriate precautions. Wash hands
throughly after handling.
For spray applications, use only with approved spray equipment.
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 5
--------------------------------------------------------------------------------
For flammable products, vapors may cause flash fire or ignite
explosively. To prevent buildup of vapors, use adequate ventilation
(e.g. open all windows and doors to achieve cross-ventilation).
Containers may be hazardous when empty. Never use welding or cutting
torch on or near container.
=====================================================================
SECTION X - ADDITIONAL REGULATORY INFORMATION
=====================================================================
-SARA TITLE III SECTION 313:
This product contains the following toxic chemicals subject to the
reporting requirements of Section 313 of the Emergency Planning and
Community Right to Know Act of 1986 and of 40 CFR 372:
Ingredient Name CAS Number Percent
TOLUENE 108-88-3 10-30
ACRYLONITRILE BUTADIENE 107-13-1 <0.5
-PROP 65 (CARCINOGEN)
WARNING: This product contains a chemical known to the state of
California to cause cancer.
Ingredient Name CAS Number Percent
ACRYLONITRILE BUTADIENE 107-13-1 <0.5
-PROP 65 (TERATOGEN)
WARNING: This product contains a chemical known to the state of
California to cause birth defects or other reproductive harm.
Ingredient Name CAS Number Percent
TOLUENE 108-88-3 10-30
The following ingredients are registered for TSCA 12B
Ingredient Name CAS Number Percent
ACETONE 67-64-1 35-60
=====================================================================
DISCLAIMER
=====================================================================
****** NOTICE ******
This information is furnished without warranty, expressed or
--------------------------------------------------------------------------------
MATERIAL SAFETY DATA SHEET
MSDS Name: TACC FA561M ONE WAY BONDING ADHESIVE
MSDS Number: FA561M
MSDS Last Updated: JUL-25-2008 Printed On: 07/25/08
Page Number: 6
--------------------------------------------------------------------------------
implied, except that it is accurate to the best knowledge of ITW
TACC. The data on this sheet relates only to the specific material
designated herein. ITW TACC assumes no legal responsibility for use
or reliance upon these data.
--------------------------------------------------------------------------------
|