Material Safety Data Sheet
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane /
Isoprene / N Pentane
Section 1. Chemical product and company identification
: Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene /
Product Name
N Pentane
: AIRGAS INC., on behalf of its subsidiaries
Supplier
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
: Synthetic/Analytical chemistry.
Product use
: 007197
MSDS#
Date of : 5/1/2007.
Preparation/Revision
: 1-866-734-3438
In case of emergency
Section 2. Hazards identification
: Gas.
Physical state
: Warning!
Emergency overview
FLAMMABLE GAS.
CONTENTS UNDER PRESSURE.
HARMFUL IF SWALLOWED.
CONTAINS MATERIAL WHICH CAUSES DAMAGE TO THE FOLLOWING ORGANS:
LUNGS, MUCOUS MEMBRANES, RESPIRATORY TRACT, SKIN, CENTRAL
NERVOUS SYSTEM, EYE, LENS OR CORNEA, NOSE, SINUSES.
SUSPECT CANCER HAZARD
CONTAINS MATERIAL WHICH MAY CAUSE CANCER
VAPOR MAY CAUSE FLASH FIRE.
Do not ingest. Keep away from heat, sparks and flame. Do not puncture or incinerate
container. Keep container closed. Use only with adequate ventilation. Wash thoroughly
after handling. Risk of cancer depends on duration and level of exposure.
Contact with rapidly expanding gases can cause frostbite.
: Inhalation
Routes of entry
Potential acute health effects
Irritating to eyes.
Eyes :
Irritating to skin.
Skin :
Acts as a simple asphyxiant.
Inhalation :
Ingestion is not a normal route of exposure for gases
:
Ingestion
CARCINOGENIC EFFECTS Classified 2B (Possible for human.) by IARC [isoprene
:
Potential chronic health :
(stabilized)]. Classified 2 (Reasonably Anticipated To Be Human Carcinogens.) by NTP
effects
[isoprene (stabilized)].
MUTAGENIC EFFECTS Not available.
:
TERATOGENIC EFFECTS Not available.
:
: Repeated exposure to a highly toxic material may produce general deterioration of health
Medical conditions
aggravated by overexposure by an accumulation in one or many human organs.
See toxicological Information (section 11)
Build 1.1 Page: 1/6
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene / N Pentane
Section 3. Composition, Information on Ingredients
Name CAS number % Volume Exposure limits
Isoprene 78-79-5 1 - 98 AIHA WEEL (United States, 1/2005). Notes:
2004 Revised Document
TWA: 2 ppm 8 hour(s). Form: All forms
Pentane 109-66-0 0.06 - 50 ACGIH TLV (United States, 9/2004). Notes:
1998 Adoption.
TWA: 600 ppm 8 hour(s). Form: All forms
NIOSH REL (United States, 6/2001).
CEIL: 1800 mg/m 3 15 minute(s). Form: All
forms
CEIL: 610 ppm 15 minute(s). Form: All
forms
TWA: 350 mg/m 3 10 hour(s). Form: All forms
TWA: 120 ppm 10 hour(s). Form: All forms
OSHA PEL (United States, 6/1993).
TWA: 2950 mg/m 3 8 hour(s). Form: All forms
TWA: 1000 ppm 8 hour(s). Form: All forms
Isopentane 78-78-4 0.06 - 20 ACGIH TLV (United States, 1/2004). Notes:
1998 Adoption.
TWA: 600 ppm 8 hour(s). Form: All forms
1-Pentene 109-67-1 1 - 20
2-Methyl-2-Butene 513-35-9 1 - 20
Section 4. First aid measures
No action shall be taken involving any personal risk or without suitable training.If fumes are still suspected to be present,
the rescuer should wear an appropriate mask or a self-contained breathing apparatus.It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation.
: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes.
Eye contact
Get medical attention if irritation occurs.
: In case of contact, immediately flush skin with plenty of water. Remove contaminated
Skin contact
clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Get medical attention.
: Try to warm up the frozen tissues and seek medical attention.
Frostbite
: If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If not breathing, give
Inhalation
artificial respiration. Get medical attention.
: Do NOT induce vomiting unless directed to do so by medical personnel. Never give
Ingestion
anything by mouth to an unconscious person. Get medical attention immediately.
Section 5. Fire fighting measures
: Flammable.
Flammability of the product
: These products are carbon oxides (CO, CO 2).
Products of combustion
: Flammable in presence of oxidizing materials.
Fire hazards in presence of
various substances
: In case of fire, use water spray (fog), foam, dry chemicals, or CO 2.
Fire fighting media and
instructions
If involved in fire, shut off flow immediately if it can be done without risk. Apply water
from a safe distance to cool container and protect surrounding area.
Extremely flammable. Gas may accumulate in confined areas, travel considerable
distance to source of ignition and flash back causing fire or explosion.
: Fire fighters should wear appropriate protective equipment and self-contained breathing
Special protective
apparatus (SCBA) with a full facepiece operated in positive pressure mode.
equipment for fire-fighters
Build 1.1 Page: 2/6
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene / N Pentane
Section 6. Accidental release measures
: Immediately contact emergency personnel. Keep unnecessary personnel away. Use
Personal precautions
suitable protective equipment (Section 8). Shut off gas supply if this can be done safely.
Isolate area until gas has dispersed.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
Section 7. Handling and storage
: Do not ingest. Keep container closed. Use only with adequate ventilation. Keep away
Handling
from heat, sparks and flame. To avoid fire, minimize ignition sources. Use explosion-
proof electrical (ventilating, lighting and material handling) equipment. Do not puncture
or incinerate container. Wash thoroughly after handling. High pressure gas. Use
equipment rated for cylinder pressure. Close valve after each use and when empty.
Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable
hand truck for cylinder movement.
: Keep container tightly closed. Keep container in a cool, well-ventilated area. Cylinders
Storage
should be stored upright, with valve protection cap in place, and firmly secured to
prevent falling or being knocked over. Cylinder temperatures should not exceed 52 癈
(125 癋).
Section 8. Exposure Controls, Personal Protection
: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation, or
Engineering controls
other engineering controls to keep airborne levels below recommended exposure limits.
The engineering controls also need to keep gas, vapor or dust concentrations below any
explosive limits. Use explosion-proof ventilation equipment.
Personal protection
: Safety eyewear complying with an approved standard should be used when a risk
Eyes
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
: Personal protective equipment for the body should be selected based on the task being
Skin
performed and the risks involved and should be approved by a specialist before handling
this product.
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
Respiratory
standard if a risk assessment indicates this is necessary.Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
The applicable standards are (US) 29 CFR 1910.134 and (Canada) Z94.4-93
: Chemical-resistant, impervious gloves or gauntlets complying with an approved standard
Hands
should be worn at all times when handling chemical products if a risk assessment
indicates this is necessary.
Personal protection in case : A self-contained breathing apparatus should be used to avoid inhalation of the product.
of a large spill
Consult local authorities for acceptable exposure limits.
Section 9. Physical and chemical properties
Not applicable.
Molecular weight :
Not applicable.
Molecular formula :
Not available.
Boiling/condensation point :
Not available.
Melting/freezing point :
Not available.
Critical temperature :
Not available.
Vapor density :
Specific Volume (ft3/lb) Not applicable.
:
Gas Density (lb/ft3) Weighted average: 0.17
:
Build 1.1 Page: 3/6
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene / N Pentane
Section 10. Stability and reactivity
: The product is stable.
Stability and reactivity
Incompatibility with various : Highly reactive with oxidizing agents.
Reactive with acids.
substances
Section 11. Toxicological information
Ingredient name Test Result Route Species
Isoprene LC50 127080 ppm (1 Inhalation Rat
hour(s))
Pentane LD50 400 mg/kg Oral Rat
Chronic effects on humans : CARCINOGENIC EFFECTS Classified 2B (Possible for human.) by IARC [isoprene
:
(stabilized)]. Classified 2 (Reasonably Anticipated To Be Human Carcinogens.) by NTP
[isoprene (stabilized)].
Contains material which causes damage to the following organs: lungs, mucous
membranes, upper respiratory tract, skin, central nervous system (CNS), eye, lens or
cornea, nose/sinuses.
: No specific information is available in our database regarding the other toxic effects of
Other toxic effects on
this material for humans.
humans
Specific effects
: Contains material which may cause cancer. Risk of cancer depends on duration and
Carcinogenic effects
level of exposure.
: No known significant effects or critical hazards.
Mutagenic effects
: No known significant effects or critical hazards.
Reproduction toxicity
Section 12. Ecological information
Ingredient name Species Period Result
Isoprene Lepomis macrochirus (LC50) 96 hour(s) 42.54 mg/l
Pimephales promelas (LC50) 96 hour(s) 74.83 mg/l
Pimephales promelas (LC50) 96 hour(s) 75 mg/l
Pimephales promelas (LC50) 96 hour(s) 77 mg/l
Pimephales promelas (LC50) 96 hour(s) 78 mg/l
Pimephales promelas (LC50) 96 hour(s) 80 mg/l
: These products are carbon oxides (CO, CO 2) and water.
Products of degradation
: The products of degradation are less toxic than the product itself.
Toxicity of the products of
biodegradation
: Not available.
Environmental fate
: No known significant effects or critical hazards.
Environmental hazards
Toxicity to the environment : Not available.
Section 13. Disposal considerations
Product removed from the cylinder must be disposed of in accordance with appropriate Federal, State, local
regulation.Return cylinders with residual product to Airgas, Inc.Do not dispose of locally.
Section 14. Transport information
Regulatory UN number Proper shipping Class Packing group Label Additional
information name information
DOT Classification UN3161 Liquefied gas, 2.1 Not applicable (gas). -
flammable, n.o.s. FLAMMABLE GAS
2
Build 1.1 Page: 4/6
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene / N Pentane
TDG Classification UN3161 Liquefied gas, 2.1 Not applicable (gas). Explosive
flammable, n.o.s. Limit and
Limited
2
Quantity
Index
0.125
ERAP Index
3000
Passenger
Carrying Ship
Index
Forbidden
Passenger
Carrying
Road or Rail
Index
Forbidden
UN3161 Liquefied gas, 2.1 Not applicable (gas). -
Mexico
flammable, n.o.s.
Classification FLAMMABLE GAS
2
Section 15. Regulatory information
United States
: TSCA 4(a) final test rules: Pentane
U.S. Federal regulations
TSCA 8(a) PAIR: Pentane
TSCA 8(b) inventory: Pentane; isoprene (stabilized); Isopentane; 1-pentene; amylene
TSCA 12(b) one time export: Pentane
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: Pentane; isoprene (stabilized);
Isopentane; 1-pentene; amylene
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: Pentane:
Fire hazard, Immediate (Acute) Health Hazard; isoprene (stabilized): Fire hazard,
reactive, Immediate (Acute) Health Hazard, Delayed (Chronic) Health Hazard;
Isopentane: Fire hazard; 1-pentene: Fire hazard, Immediate (Acute) Health Hazard;
amylene: Fire hazard
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: isoprene (stabilized)
Clean air act (CAA) 112 accidental release prevention: Pentane; isoprene (stabilized);
Isopentane; 1-pentene
Clean air act (CAA) 112 regulated flammable substances: Pentane; isoprene (stabilized);
Isopentane; 1-pentene
Clean air act (CAA) 112 regulated toxic substances: No products were found.
: Pennsylvania RTK: Pentane: (generic environmental hazard); isoprene (stabilized):
State regulations
(environmental hazard, generic environmental hazard); Isopentane: (generic
environmental hazard); 1-pentene: (generic environmental hazard); amylene: (generic
environmental hazard)
Massachusetts RTK: Pentane; isoprene (stabilized); Isopentane; 1-pentene; amylene
New Jersey: Pentane; isoprene (stabilized); Isopentane; 1-pentene
: WARNING: This product contains a chemical known to the State of California to cause
California prop. 65
cancer.
Ingredient name Cancer Reproductive No significant risk Maximum
level acceptable dosage
level
Isoprene Yes. No. No. No.
Build 1.1 Page: 5/6
Flammable Liquefied Gas Mixture: 1 Pentene / 2 Methyl 2 Butene / Isopentane / Isoprene / N Pentane
Canada
: Class A: Compressed gas.
WHMIS (Canada)
Class D-1B: Material causing immediate and serious toxic effects (TOXIC).
Class D-2A: Material causing other toxic effects (VERY TOXIC).
CEPA DSL: Pentane; isoprene (stabilized); Isopentane; 1-pentene; amylene
Section 16. Other information
United States
: FLAMMABLE GAS.
Label Requirements
CONTENTS UNDER PRESSURE.
HARMFUL IF SWALLOWED.
CONTAINS MATERIAL WHICH CAUSES DAMAGE TO THE FOLLOWING ORGANS:
LUNGS, MUCOUS MEMBRANES, RESPIRATORY TRACT, SKIN, CENTRAL
NERVOUS SYSTEM, EYE, LENS OR CORNEA, NOSE, SINUSES.
SUSPECT CANCER HAZARD
CONTAINS MATERIAL WHICH MAY CAUSE CANCER
VAPOR MAY CAUSE FLASH FIRE.
Canada
: Class A: Compressed gas.
Label Requirements
Class D-1B: Material causing immediate and serious toxic effects (TOXIC).
Class D-2A: Material causing other toxic effects (VERY TOXIC).
*2
Hazardous Material : Health
Information System (U.S.A.)
4
Fire hazard
0
Reactivity
C
Personal protection
National Fire Protection :
Flammability
4
Association (U.S.A.)
2 0
Health Instability
Special
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named
supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Build 1.1 Page: 6/6
|