Composites
Material Safety Data Sheet
according to Directive EC 1907/2006 Revision: 20-08-08
Page: 1 of 3
Product: Lantor ?Soric XF, SF, TF, LRC
0. Introduction
This document provides a Material Safety Data Sheet (MSDS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSDS for nonwovens
10/GV8/422). The MSDS is a means of transferring essential hazard information (including information
on transport, handling, storage and emergency actions) from the supplier of a nonwoven product to
the recipient of the product. As nonwovens are generally not hazardous, MSDS for nonwovens is not
legally requested but must be considered as information. It is inspired from the EC recommendation
for MSDS EC 1907/2006.
1. Identification of the product and the company
1.1. Identification of the product(s)
Product name: Lantor Soric XF
Product Code: XF1002, XF1003, XF1004, XF1005, XF1006
Product name: Lantor Soric SF
Product Code: SF1002, SF1003
Product name: Lantor Soric TF
Product Code: TF1015, TF1002, TF1003
Product name: Lantor Soric LRC
Product Code: LRC102, LRC103
1.2. Intended use of the product
Liner / core material in FRP-applications.
1.3. Company identification
Company/Plant where information on the product safety is available:
Lantor BV/Lantor?br>
Name :
Address : P.O. Box 45, NL-3900 AA Veenendaal, The Netherlands
Phone number : +31(0) 318 537111
Fax number : +31(0) 318 537399
Department/person responsible for the product safety:
Name : Lantor B.V. Composites
Address : P.O. Box 45, NL-3900 AA Veenendaal, The Netherlands
Phone number : +31(0) 318 537111
Fax number : +31(0) 318 537420
2. Hazards identification
No hazardous product under normal conditions.
Accidental thermal decomposition or melting state can present hazards.
The information contained in this Material Safety Data Sheet has been developed by the Company on the express request of its customers and to the
best of its knowledge. Therefore, the Company does not assume any liability with respect to the correctness and/or completeness of the information
provided by this Material Safety Data Sheet. The customer in particular shall not be released from his duty to check all safety relevant properties of the
delivered nonwovens and to refer to the official texts for full information on the local obligations.
Composites
Material Safety Data Sheet
according to Directive EC 1907/2006 Revision: 20-08-08
Page: 2 of 3
Product: Lantor ?Soric XF, SF, TF, LRC
3. Composition / Information on ingredients
Identification of the type of nonwoven product:
3.1. Nonwoven
Carded web, chemically bonded.
3.2. Nature of the fibre(s)
Polyester (PES)
3.3. Web surface treatment - Concentration above 1%
Cured acrylic binder.
3.4. Binder
Acrylic binder.
3.5. Additives
Copolymer CAS nr 38742-70-0
Iso-pentane CAS nr 78-78-4
3.6. Other major components - Concentration above 1% - None
None.
3.7. Chemicals (in relevant concentration) that are in the list of dangerous substances.
None.
4. First aid measures
4.1. Inhalation
By inhalation of microspheres, move person to fresh air.
4.2. Skin contact
No specific measure to be taken.
4.3. Eyes contact
Eyes should be flushed out with water.
4.4. Ingestion
Unlikely. In case of ingestion, get medical help.
5. Fire fighting measures
5.1. Suitable extinguishing media
Water, water/foam, CO2.
5.2. Extinguishing-media not to be used
Water in case short-circuiting is the cause of the fire.
5.3. Special exposure hazard
For flammable and toxic fumes as well as skin contact with molten materials see section 10.
5.4. Special protective clothing for fire-fighter
No special requirement.
6. Accidental release measures
Not applicable.
7. Handling and storage
Keep Lantor Soric ?in the original package. Store in a cool and well ventilated area. The temperature
should be above 0 癈 but must not exceed +30 癈.
8. Exposure controls / personal protection
General room ventilation is recommended.
The information contained in this Material Safety Data Sheet has been developed by the Company on the express request of its customers and to the
best of its knowledge. Therefore, the Company does not assume any liability with respect to the correctness and/or completeness of the information
provided by this Material Safety Data Sheet. The customer in particular shall not be released from his duty to check all safety relevant properties of the
delivered nonwovens and to refer to the official texts for full information on the local obligations.
Composites
Material Safety Data Sheet
according to Directive EC 1907/2006 Revision: 20-08-08
Page: 3 of 3
Product: Lantor ?Soric XF, SF, TF, LRC
9. Physical and chemical properties
Appearance (the colour of the product as supplied): Off-white
Odour : Neutral
pH : not applicable
Boiling point/boiling range : not applicable
Melting point/melting range : 250 ?265 癈 (PES fibres)
Decomposition temperature : 450 癈
Flash point : not applicable
Flammability : not easily flammable (see section 10)
Autoflammability (temperature) : > 450 癈
Explosive properties : not applicable
Oxidizing properties : not applicable
Vapour pressure : not applicable
Relative density : not applicable
Solubility: - water solubility : insoluble in water
- fat solubility : not applicable
Partition coefficient: n.octanol/water : not applicable
10. Stability and reactivity
The material is chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of
cleavage and oxidation products is subject to fire conditions. Non burned residues and
contaminated water after fire fighting should be disposed of in compliance with official regulations.
Molten material should not be allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
Acute toxity: None
Local effect: None
Chronic short and long term toxity: None
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
There is no indication that this material is a risk to the environment. This material is water
insoluble.
13. Disposal considerations
As on hazardous solid waste, nonwovens can be disposed of, depending on local legislation,
through recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the material dry during transport.
15. Regulatory information
None.
16. Other information
None.
The information contained in this Material Safety Data Sheet has been developed by the Company on the express request of its customers and to the
best of its knowledge. Therefore, the Company does not assume any liability with respect to the correctness and/or completeness of the information
provided by this Material Safety Data Sheet. The customer in particular shall not be released from his duty to check all safety relevant properties of the
delivered nonwovens and to refer to the official texts for full information on the local obligations.
|