MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 1
Material Safety Data Sheet
Specialty Additives
INGREDIENTS CAS # VAPOR EXPOSURE
SECTION 1. Identification of the substance/preparation and of the
PRESSURE LIMITS
company/undertaking
O 20.0 mppcf
D 3.0 mg/m3
Antimony trioxide
1309-64-4 None A 0.5 mg/m3
Manufacturer: E.I. du Pont de Nemours & Co.
Sb
DuPont Performance Coatings
O 0.5 mg/m3
Wilmington, DE, 19898
Sb
D 0.2 mg/m3
Telephone: Product information: (800) 441-7515
Sb
Medical emergency: (800) 441-3637
D 0.1 mg/m3
Transportation emergency: (800) 424-9300
12 hr TWA
(CHEMTREC)
Sb
Aromatic hydrocarbon-A
Product:
Mastertint and Mastertint Specialty Additives 64742-94-5 10.0 D 100.0 ppm
R R
A None
DOT Shipping Name: See DOT Addendum. O None
Aromatic hydrocarbon-B
10.0@25.0 C D 50.0 ppm
Hazardous Materials Information: See Section 10. 64742-95-6
A None
O None
Azomethine copper-complex
Copyright 2007 E. I. duPont de Nemours and Company. All rights
15680-42-9 None A None
reserved. Copies may be made only for those using DuPont products.
O None
Barium sulfate
7727-43-7 None A 10.0 mg/m3
SECTION 2. Composition/information on ingredients
Total Dust
A 5.0 mg/m3
Respirable Dust
INGREDIENTS CAS # VAPOR EXPOSURE O 15.0 mg/m3
PRESSURE LIMITS Total Dust
1,2,4-trimethyl benzene O 5.0 mg/m3
7.0@44.4 C
95-63-6 A 25.0 ppm Respirable Dust
O 25.0 ppm D 10.0 mg/m3
2-methyl butyl acetate Total Dust
624-41-9 None A 100.0 ppm D 5.0 mg/m3
15 min STEL 8 & 12 hour TWA
A 50.0 ppm Respirable Dust
O None Butyl acetate
Acrylic polymer 123-86-4 10.0 A 200.0 ppm
96591-17-2 None A None 15 min STEL
O None A 150.0 ppm
Aluminum O 150.0 ppm
7429-90-5 None A 10.0 mg/m3 C.i. pigment blue 15 (monochlor)
particulate 12239-87-1 None A 10.0 mg/m3
A 5.0 mg/m3 Total Dust
Dust O 5.0 mg/m3
O 15.0 mg/m3 Respirable Dust
Total Dust Total Dust
O 5.0 mg/m3 O 15.0 mg/m3
Respirable Dust Respirable Dust
Aluminum benzoate C.i. pigment blue 60
555-32-8 None A 15.0 mg/m3 81-77-6 None A None
Metal Dust O None
Al C.i. pigment brown
O 15.0 mg/m3 6992-11-6 None A None
Metal Dust O None
Al C.i. pigment red 254
Aluminum hydrate 84632-65-5 None A None
21645-51-2 None A None O None
O None C.i. pigment yellow 154
Aluminum oxide 68134-22-5 None A None
1344-28-1 None A 10.0 mg/m3 O None
O 15.0 mg/m3 Carbazole violet pigment
Total Dust
O 5.0 mg/m3
Respirable Dust
Amorphous silica
7631-86-9 None A 10.0 mg/m3
Total Dust
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 2
Material Safety Data Sheet
Specialty Additives
INGREDIENTS CAS # VAPOR EXPOSURE INGREDIENTS CAS # VAPOR EXPOSURE
PRESSURE LIMITS PRESSURE LIMITS
6358-30-1 None A None A 10.0 mg/m3
O None inhalable dust
Carbon black Mo
1333-86-4 None A 3.5 mg/m3 A 3.0 mg/m3
O 3.5 mg/m3 respirable partic-
D 0.5 mg/m3 ulate
8 & 12 hour TWA Mo
Chromium hydroxide A 12.0 ug/m3
1308-14-1 None A 0.5 mg/m3 Cr(VI)
Cr O 50.0 ug/m3
O 0.5 mg/m3 Pb
Cr O 5.0 ug/m3
Chromium(iii) oxide (2:3) Cr(VI)
1308-38-9 None A 0.5 mg/m3 Lead chromates
Cr 7758-97-6 None A 50.0 ug/m3
O 0.5 mg/m3 Pb
Cr A 12.0 ug/m3
Ethylbenzene Cr(VI)
100-41-4 7.0 A 125.0 ppm O 50.0 ug/m3
15 min STEL Pb
A 100.0 ppm O 5.0 ug/m3
O 100.0 ppm Cr(VI)
D 25.0 ppm D 50.0 ug/m3
8 & 12 hour TWA Cr(VI)
Ethylene glycol monobutyl ether Lead sulfochromate yellow
111-76-2 0.6 A 20.0 ppm 1344-37-2 None A 50.0 ug/m3
O 50.0 ppm Pb
Skin A 12.0 ug/m3
D 5.0 ppm Cr(VI)
Skin O 50.0 ug/m3
D 5.0 ppm TWA
Graphite, synthetic Pb
NotAvail None A 2.0 mg/m3 O 5.0 ug/m3
Respirable Dust Cr(VI)
O 15.0 mg/m3 D 50.0 ug/m3
Total Dust Cr(VI)
O 5.0 mg/m3 Medium mineral spirits
0.3@68.0 F
Respirable Dust 64742-88-7 D 50.0 ppm
Heavy mineral spirits 8 & 12 hour TWA
10.0@25.0 C D 100.0 ppm
64741-65-7 A None
A None O None
O None Mica
Hydrotreated heavy naphtha (petroleum) 12001-26-2 None A 3.0 mg/m3
0.7@68.0 F
64742-48-9 A 100.0 ppm Respirable Dust
O 500.0 ppm O 20.0 mppcf
D 100.0 ppm O 3.0 mg/m3
Iron oxide-A Respirable Dust
1309-37-1 None A 5.0 mg/m3 Mica coated with tio2
Respirable Dust NotAvail None A 3.0 mg/m3
O 10.0 mg/m3 Respirable Dust
D 3.0 mg/m3 Mica
Iron oxide-B O 3.0 mg/m3
51274-00-1 None A 5.0 mg/m3 Respirable Dust
O 10.0 mg/m3 Mica
Isoindolinone pigment Monoazo pigment
36888-99-0 None A None 12236-62-3 None A 10.0 mg/m3
O None inhalable dust
Isoindolinone yellow pigment particulate
106276-79-3 None A None O 15.0 mg/m3
O None Total Dust
Lead chromate molybdate O 5.0 mg/m3
12656-85-8 None A 50.0 ug/m3 Respirable Dust
Pb Oleic acid
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 3
Material Safety Data Sheet
Specialty Additives
INGREDIENTS CAS # VAPOR EXPOSURE INGREDIENTS CAS # VAPOR EXPOSURE
PRESSURE LIMITS PRESSURE LIMITS
112-80-1 10.0@224.0 C A None NotAvail None A None
O None O None
Perylene maroon Propylene carbonate
5521-31-3 None A None 108-32-7 0.0 A None
O None O None
Perylene pigment Quinacridone magenta
5521-31-3 None A 10.0 mg/m3 980-26-7 None A None
O None O None
Phthalocyanine blue Quinacridone pigment
29719-96-8 None A 10.0 mg/m3 1047-16-1 None A 10.0 mg/m3
O 5.0 mg/m3 inhalable dust
Respirable Dust A 3.0 mg/m3
O 15.0 mg/m3 O 15.0 mg/m3
Phthalocyanine blue pigment Total Dust
147-14-8 None A 10.0 mg/m3 PNOR
inhalable dust O 5.0 mg/m3
PNOC Respirable Dust
A 3.0 mg/m3 D 10.0 mg/m3
respirable partic- Total Dust
ulate Red iron oxide light
PNOC 1332-37-2 None A 10.0 mg/m3
O 15.0 mg/m3 PNOR
Total Dust A 3.0 mg/m3
PNOR Respirable Dust
O 5.0 mg/m3 A 5.0 mg/m3
TWA Fe
Respirable Dust O 15.0 mg/m3
PNOR Total Dust
Phthalocyanine green O 5.0 mg/m3
1328-53-6 None A 3.0 mg/m3 Respirable Dust
TWA Silica alumina ceramic
Respirable Dust 66402-68-4 None A None
A 10.0 mg/m3 O None
TWA Stoddard solvent
1.0@25.0 C
inhalable dust 8052-41-3 A 100.0 ppm
O 15.0 mg/m3 O 500.0 ppm
TWA TWA
Total Dust D 100.0 ppm
O 5.0 mg/m3 15 min STEL
TWA D 50.0 ppm
Respirable Dust 8 & 12 hour TWA
Phthalocyanine green pigment Tetrachloroisonsolinone yellow pigment
68512-13-0 None A None 5590-18-1 None A 10.0 mg/m3
O None O None
Pigment red 202 Tetrahydrofuran
173.0@25.0 C A 50.0 ppm
3089-17-6 None A 3.0 mg/m3 109-99-9
Respirable Dust Skin
A 10.0 mg/m3 D 75.0 ppm
inhalable dust 15 min TWA
PNOR D 50.0 ppm
O 5.0 mg/m3 8 & 12 hour TWA
Respirable Dust O None
PNOR Tin oxide
O 15.0 mg/m3 18282-10-5 None A 2.0 mg/m3
Polyamine polyester polymer O 2.0 mg/m3
NotAvail 12.4 A None Titanium dioxide
O None 13463-67-7 None A 10.0 mg/m3
Primary amyl acetate O 15.0 mg/m3
628-63-7 4.2 A 100.0 ppm Total Dust
15 min STEL D 10.0 mg/m3
A 50.0 ppm Total Dust
O 100.0 ppm D 5.0 mg/m3
Proprietary copper compound Respirable Dust
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 4
Material Safety Data Sheet
Specialty Additives
INGREDIENTS CAS # VAPOR EXPOSURE Is an IARC, NTP or OSHA carcinogen. Cancer hazard based on tests with
PRESSURE LIMITS laboratory animals. Overexposure may create cancer risk This substance
Titanium dioxide (rutile) may cause effects on any of the following organs/systems: lungs. Tests in
1317-80-2 None A 10.0 mg/m3 laboratory animals have shown potential for developmental toxicity. The
TWA significance to man is unknown.
Total Dust WARNING: This chemical is known to the State of California to cause
O 10.0 mg/m3 cancer.
Total Dust
O 5.0 mg/m3 Aromatic hydrocarbon-A
Respirable Dust Laboratory studies with rats have shown that petroleum distillates can
D 10.0 mg/m3 cause kidney damage and kidney or liver tumors. These effects were not
Total Dust seen in similar studies with guinea pigs, dogs, or monkeys. Several studies
D 5.0 mg/m3 evaluating petroleum workers have not shown a significant increase of
Respirable Dust kidney damage or an increase in kidney or liver tumors.
Weather resistant mixture
NotAvail None A None Aromatic hydrocarbon-B
O None The following medical conditions may be aggravated by exposure: skin
Xylene disorders. Laboratory studies with rats have shown that petroleum
8.0@25.0 C
1330-20-7 A 150.0 ppm distillates can cause kidney damage and kidney or liver tumors. These
15 min STEL effects were not seen in similar studies with guinea pigs, dogs, or monkeys.
A 100.0 ppm Several studies evaluating petroleum workers have not shown a significant
O 100.0 ppm increase of kidney damage or an increase in kidney or liver tumors.
D 150.0 ppm
15 min STEL Butyl acetate
D 100.0 ppm May cause abnormal liver function. The following medical conditions may
8 & 12 hour TWA be aggravated by exposure: respiratory system. Tests for embryotoxic
Yellow iron oxide activity in animals has been inconclusive. Rats exposed to very high
51274-00-1 None A 10.0 mg/m3 airborne levels have exhibited high frequency hearing deficits. The
O 15.0 mg/m3 significance of this to man is unknown. Has been toxic to the fetus in
Zirconium oxide laboratory animals at doses that are toxic to the mother.
1314-23-4 None A 10.0 mg/m3
15 min STEL C.i. pigment yellow 154
A 5.0 mg/m3 Inhalation may cause any of the following: respiratory tract irritation. Skin
O 5.0 mg/m3 or eye contact may cause any of the following: irritation.
Zr
Carbon black
Is an IARC, NTP or OSHA carcinogen. Has shown carcinogenic activity in
*A=ACGIH, O=OSHA, D=DuPont, S=Suppliers. Limits are 8 hour TWA
laboratory animals at high doses. Significance to man is unknown. The
unless otherwise specified. Vapor pressure @ 20 C unless
following medical conditions may be aggravated by exposure: asthma,
otherwise noted.
respiratory disease.
WARNING: This chemical is known to the State of California to cause
cancer.
SECTION 3. Hazards identification
Ethylbenzene
Is an IARC, NTP or OSHA carcinogen. Increased susceptibility to the
Potential Health Effects:
effects of this material may be observed in people with preexisting disease
Inhalation:
of any of the following: central nervous system, kidneys, liver, lungs.
May cause nose and throat irritation. May cause nervous system
Recurrent overexposure may result in liver and kidney injury. Studies in
depression, characterized by the following progressive steps: headache,
laboratory animals have shown reproductive, embryotoxic and
dizziness, nausea, staggering gait, confusion, unconsciousness. Reports
developmental effects.
have associated repeated and prolonged overexposure to solvents with
WARNING: This chemical is known to the State of California to cause
permanent brain and nervous system damage. If this product contains or
cancer.
is mixed with an isocyanate activator/hardener, the following health effects
may apply: Exposure to isocyanates may cause respiratory sensitization.
Ethylene glycol monobutyl ether
This effect may be permanent. Symptoms include an asthma-like reaction
Increased susceptibility to the effects of this material may be observed in
with shortness of breath, wheezing, cough or permanent lung
people with preexisting disease of any of the following: bone marrow,
sensitization. This effect may be delayed for several hours after exposure.
central nervous system, eyes, gastrointestinal system, kidneys, liver,
Repeated overexposure to isocyanates may cause a decrease in lung
respiratory system, skin. May cause injury to the kidneys, liver, blood
function, which may be permanent. Individuals with lung or breathing
and/or bone marrow. Repeated overexposure may result in damage to the
problems or prior reactions to isocyanates must not be exposed to vapors
blood. Eye contact may cause corneal injury. Has been toxic to the fetus in
or spray mist of this product.
laboratory animals at doses that are toxic to the mother. If absorbed
through the skin, may be: harmful.
Ingestion:
Graphite, synthetic
May result in gastrointestinal distress.
Breathing of fume or dust may aggravate asthma and cause fibrotic
pulmonary disease.
Skin or eye contact:
May cause irritation or burning of the eyes. Repeated or prolonged liquid Heavy mineral spirits
contact may cause skin irritation with discomfort and dermatitis. Laboratory studies with rats have shown that petroleum distillates can
cause kidney damage and kidney or liver tumors. These effects were not
seen in similar studies with guinea pigs, dogs, or monkeys. Several studies
Other Potential Health Effects in addition to those listed above:
evaluating petroleum workers have not shown a significant increase of
Antimony trioxide
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 5
Material Safety Data Sheet
Specialty Additives
kidney damage or an increase in kidney or liver tumors. petroleum workers have not shown a significant increase of kidney
damage or an increase in kidney or liver tumors.
Hydrotreated heavy naphtha (petroleum)
Laboratory studies with rats have shown that petroleum distillates can Mica
cause kidney damage and kidney or liver tumors. These effects were not Repeated or prolonged inhalation may cause any of the following: lung
seen in similar studies with guinea pigs, dogs, or monkeys. Several studies irritation. Long-term respiratory exposure exceeding TLV may damage the
evaluating petroleum workers have not shown a significant increase of lungs, leading to bronchitis and impairment of lung capacity.
kidney damage or an increase in kidney or liver tumors.
Mica coated with tio2
Lead chromate molybdate In a lifetime inhalation test, lung cancers were found in some rats exposed
Is an IARC, NTP or OSHA carcinogen. Over exposure to lead may cause to 250 mg/m3 respirable titanium dust. Analysis of the titanium dioxide
adverse effects to the blood forming, nervous, urinary, reproductive concentrations in the rat's lungs showed that the lung clearance
systems including embryotoxic effects. Symptoms may include loss of mechanism was overwhelmed and that the results at the massive 250
appetite, anemia, disturbance of sleep and fatigue. See OSHA lead mg/m3 level are not relevant to the workplace.`Results of a DuPont
standard 29CFR1910.1025. For exposures longer than 8 hours the OSHA epidemiology study showed that employees who had been exposed to
exposure limit is reduced by this formula: limit(in ug/m3)= 400/hours Titanium Dioxide were at no greater risk of developing lung cancer than
worked in the day. Health studies have shown that chromate pigment were employees who had not been exposed to Titanium dioxide. No
manufacturing may be associated with an increase risk of lung cancer. pulmonary fibrosis was found in any of the employees and no association
Repeated or prolonged skin contact may cause any of the following: was observed between Titanium dioxide exposure and chronic respiratory
dermatitis, allergic skin rash. The following medical conditions may be disease or x-ray abnormalities. Based on the results of this study DuPont
aggravated by overexposure: asthma. Repeated or prolonged skin or eye concludes that titanium dioxide will not cause lung cancer or chronic
contact may cause any of the following: irritation. Repeated or prolonged respiratory disease in humans at concentrations experienced in the
inhalation may cause any of the following: respiratory tract irritation, workplace.` Repeated and prolonged overexposure may lead to chronic
sensitization, asthma-like reactions, e.g. wheezing, chest tightness. lung disease.
WARNING: This chemical is known to the State of California to cause
cancer and birth defects or other reproductive harm. Polyamine polyester polymer
Contact may cause skin irritation with discomfort or rash. May cause eye
Lead chromates irritation with discomfort, tearing, or blurred vision.
Is an IARC, NTP or OSHA carcinogen. Over exposure to lead may cause
adverse effects to the blood forming, nervous, urinary, reproductive Red iron oxide light
systems including embryotoxic effects. Symptoms may include loss of Long- term respiratory exposure of iron oxide may result in deposition of
appetite, anemia, disturbance of sleep and fatigue. See OSHA lead particles in the lung (benign siderosis).
standard 29CFR1910.1025. For exposures longer than 8 hours the OSHA
exposure limit is reduced by this formula: limit(in ug/m3)= 400/hours Silica alumina ceramic
worked in the day. Health studies have shown that chromate pigment Ingestion may cause any of the following: gastrointestinal irritation. Skin or
manufacturing may be associated with an increase risk of lung cancer. eye contact may cause any of the following: mechanical irritation.
Repeated or prolonged skin contact may cause any of the following: Inhalation may cause any of the following: upper respiratory tract irritation.
dermatitis, allergic skin rash. The following medical conditions may be
aggravated by overexposure: asthma. Repeated or prolonged skin or eye Stoddard solvent
contact may cause any of the following: irritation. Repeated or prolonged The following medical conditions may be aggravated by exposure: asthma,
inhalation may cause any of the following: respiratory tract irritation, skin disorders. Laboratory studies with rats have shown that petroleum
sensitization, asthma-like reactions, e.g. wheezing, chest tightness. distillates can cause kidney damage and kidney or liver tumors. These
WARNING: This chemical is known to the State of California to cause effects were not seen in similar studies with guinea pigs, dogs, or monkeys.
cancer and birth defects or other reproductive harm. Several studies evaluating petroleum workers have not shown a significant
increase of kidney damage or an increase in kidney or liver tumors.
Lead sulfochromate yellow
Is an IARC, NTP or OSHA carcinogen. Over exposure to lead may cause Tetrahydrofuran
adverse effects to the blood forming, nervous, urinary, reproductive Increased susceptibility to the effects of this material may be observed in
systems including embryotoxic effects. Symptoms may include loss of people with preexisting disease of any of the following: liver, lungs.
appetite, anemia, disturbance of sleep and fatigue. See OSHA lead Inhalation of vapor may cause any of the following: dizziness, headache,
standard 29CFR1910.1025. For exposures longer than 8 hours the OSHA stupor (central nervous system depression), coughing, respiratory tract
exposure limit is reduced by this formula: limit(in ug/m3)= 400/hours irritation. Skin or eye contact may cause any of the following: irritation.
worked in the day. Health studies have shown that chromate pigment
manufacturing may be associated with an increase risk of lung cancer. Titanium dioxide
Repeated or prolonged skin contact may cause any of the following: Is an IARC, NTP or OSHA carcinogen. In a lifetime inhalation test, lung
dermatitis, allergic skin rash. The following medical conditions may be cancers were found in some rats exposed to 250 mg/m3 respirable
aggravated by overexposure: asthma. Repeated or prolonged skin or eye titanium dust. Analysis of the titanium dioxide concentrations in the rat's
contact may cause any of the following: irritation. Repeated or prolonged lungs showed that the lung clearance mechanism was overwhelmed and
inhalation may cause any of the following: respiratory tract irritation, that the results at the massive 250 mg/m3 level are not relevant to the
sensitization, asthma-like reactions, e.g. wheezing, chest tightness. workplace.`Results of a DuPont epidemiology study showed that
WARNING: This chemical is known to the State of California to cause employees who had been exposed to Titanium Dioxide were at no greater
cancer and birth defects or other reproductive harm. risk of developing lung cancer than were employees who had not been
exposed to Titanium dioxide. No pulmonary fibrosis was found in any of
Medium mineral spirits the employees and no association was observed between Titanium dioxide
Increased susceptibility to the effects of this material may be observed in exposure and chronic respiratory disease or x-ray abnormalities. Based on
people with preexisting disease of any of the following: central nervous the results of this study DuPont concludes that titanium dioxide will not
system, kidneys, liver, respiratory system, skin. This substance may cause cause lung cancer or chronic respiratory disease in humans at
damage to any of the following organs/systems: blood, central nervous concentrations experienced in the workplace.`
system, eyes, kidneys, liver, lungs, reproductive system, skin. Laboratory
studies with rats have shown that petroleum distillates can cause kidney Titanium dioxide (rutile)
damage and kidney or liver tumors. These effects were not seen in similar Is an IARC, NTP or OSHA carcinogen. In a lifetime inhalation test, lung
studies with guinea pigs, dogs, or monkeys. Several studies evaluating cancers were found in some rats exposed to 250 mg/m3 respirable
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 6
Material Safety Data Sheet
Specialty Additives
titanium dust. Analysis of the titanium dioxide concentrations in the rat's SECTION 6. Accidental release measures
lungs showed that the lung clearance mechanism was overwhelmed and
that the results at the massive 250 mg/m3 level are not relevant to the
workplace.`Results of a DuPont epidemiology study showed that Procedures for cleaning up spills or leaks:
employees who had been exposed to Titanium Dioxide were at no greater Ventilate area. Remove sources of ignition. Prevent skin and eye contact
risk of developing lung cancer than were employees who had not been and breathing of vapor. If material does not contain or is not mixed with an
exposed to Titanium dioxide. No pulmonary fibrosis was found in any of isocyanate activator/hardener: Wear a properly fitted air-purifying
the employees and no association was observed between Titanium dioxide respirator with organic vapor cartridges (NIOSH approved TC-23C), eye
exposure and chronic respiratory disease or x-ray abnormalities. Based on protection, gloves and protective clothing. Confine, remove with inert
the results of this study DuPont concludes that titanium dioxide will not absorbent, and dispose of properly. If the material contains, or is mixed
cause lung cancer or chronic respiratory disease in humans at with an isocyanate activator/hardener: Wear a positive-pressure,
concentrations experienced in the workplace.` supplied-air respirator (NIOSH approved TC-19C), eye protection, gloves
and protective clothing. Pour liquid decontamination solution over the spill
Xylene and allow to sit at least 10 minutes. Typical decontamination solutions for
Increased susceptibility to the effects of this material may be observed in isocyanate containing materials are: 20% Surfactant (Tergitol TMN 10) and
people with preexisting disease of any of the following: bone marrow, 80% Water OR 0-10% Ammonia, 2-5% Detergent and Water (balance).
cardiovascular system, central nervous system, kidneys, liver, lungs. Pressure can be generated. Do not seal waste containers for 48 hours to
Recurrent overexposure may result in liver and kidney injury. High allow C02 to vent. After 48 hours, material may be sealed and disposed of
exposures may produce irregular heart beats. Canada classifies Xylene as properly.
a developmental toxin as high exposures to xylenes in some animal
studies have been reported to cause health effects on the developing
Ecological information:
fetus/embryo. These effects were often at levels toxic to the adult animal.
There is no data available on the product. The product should not be
The significance of these effects to humans is not known. Repeated or
allowed to enter drains, water courses or the soil.
prolonged skin contact may cause any of the following: irritation, dryness,
cracking of the skin.
SECTION 7. Handling and storage
Precautions to be taken in handling and storing:
SECTION 4. First aid measures
Observe label precautions. If combustible (flashpoint between 100 - 200
deg F), keep away from heat, sparks and flame. If flammable (flashpoint
less than 100 deg F), also keep away from static discharges and other
First Aid Procedures: sources of ignition. If material is extremely flammable (flashpoint less than
Inhalation: 20 deg F) or flammable, VAPORS MAY IGNITE EXPLOSIVELY OR
If affected by inhalation of vapor or spray mist, move to fresh air. If not CAUSE FLASH FIRE, respectively. Vapors may spread long distances.
breathing, give artificial respiration, preferably mouth-to-mouth. If breathing Prevent buildup of vapors. Close container after each use. Ground
difficulty persists, or occurs later, consult a physician. containers when pouring. Wash thoroughly after handling and before
eating or smoking. Do not store above 120 deg F. If product is waterbased,
do not freeze.
Ingestion:
In the unlikely event of ingestion, DO NOT INDUCE VOMITING. Call a
physician immediately and have names of ingredients available.
Other precautions:
If material is a coating: do not sand, flame cut, braze or weld dry coating
Skin or eye contact:
without a NIOSH approved air purifying respirator with particulate filters or
In case of eye contact, immediately flush with plenty of water for at least 15
appropriate ventilation, and gloves.
minutes; call a physician. In case of skin contact, wash thoroughly with
soap and water. If irritation occurs, contact a physician.
SECTION 8. Exposure controls / personal protection
SECTION 5. Fire-fighting measures
Engineering controls and work practices:
Ventilation:
Flash Point (Closed Cup): See Section 11 for exact values. Provide sufficient ventilation in volume and pattern to keep contaminants
below applicable exposure limits.
Flammable Limits: LFL 0 % UFL 12.3 %
Respiratory protection:
Extinguishing Media: Do not breathe vapors or mists. If this product contains isocyanates or is
Universal aqueous film-forming foam, carbon dioxide, dry chemical. used with an isocyanate activator/hardener, wear a positive-pressure,
supplied-air respirator (NIOSH approved TC-19C) while mixing
Fire Fighting Procedures: activator/hardener with paint, during application and until all vapors and
Full protective equipment, including self-contained breathing apparatus, is spray mist are exhausted. If product does not contain or is not mixed with
recommended. Water from fog nozzles may be used to prevent pressure an isocyanate activator/hardener, a properly fitted air-purifying respirator
build-up. with organic vapor cartridges (NIOSH TC-23C) and particulate filter
(NIOSH TC-84A) may be used. Follow respirator manufacturer s directions
for respirator use. Do not permit anyone without protection in the painting
Fire and Explosion Hazards:
area. Individuals with history of lung or breathing problems or prior
For flammable liquids, vapor/air will ignite when an ignition source is
reaction to isocyanates should not use or be exposed vapor or spray mist if
present. In other cases, when heated above the flash point, emits
product contains or is mixed with isocyanate activators/hardeners.
flammable vapors which, when mixed with air, can burn or be explosive.
Fine mists or sprays may be flammable at temperatures below the flash
point. Protective equipment:
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 7
Material Safety Data Sheet
Specialty Additives
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Personal protective equipment should be worn to prevent contact with
eyes, skin or clothing. TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
803JTM Acrylic polymer, Aluminum oxide(3%*), Butyl acetate,
Skin protection:
Neoprene gloves and coveralls are recommended. Ethylbenzene(6.0%*@), Titanium dioxide(33.6%), Xylene(24%*@)
GAL WT: 11.09 WT PCT SOLIDS: 59.85 VOL PCT SOLIDS: 38.68
SOLVENT DENSITY: 7.23 VOC LE: 4.5 VOC AP: 4.5
Eye protection:
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Desirable in all industrial situations. Goggles are preferred to prevent eye
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
irritation. If safety glasses are substituted, include splash guard or side
shields.
805JTM Acrylic polymer, Butyl acetate, Carbon black(4.5%),
Ethylbenzene(10.3%*@), Xylene(25%*@)
SECTION 9. Physical and chemical properties
GAL WT: 8.29 WT PCT SOLIDS: 50.33 VOL PCT SOLIDS: 43.39
SOLVENT DENSITY: 7.26 VOC LE: 4.1 VOC AP: 4.1
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Evaporation rate Slower than Ether
Water solubility NIL TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Vapour density Heavier than air
Approx. Boiling Range ( C) 100 - 400 C 806JTM Acrylic polymer, Aluminum benzoate, Butyl acetate, Carbon
Approx. Freezing Range ( C) -74 - -35 C black(2.9%), Ethylbenzene(7.7%*@), Xylene(30%*@)
Gallon Weight (lbs/gal) 7.91 - 29.15 GAL WT: 8.25 WT PCT SOLIDS: 47.70 VOL PCT SOLIDS: 40.61
Specific Gravity 0.95 - 3.49 SOLVENT DENSITY: 7.23 VOC LE: 4.3 VOC AP: 4.3
Percent Volatile By Volume 23.86 - 79.08 FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Percent Volatile By Weight 10.00 - 72.49 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Percent Solids By Volume 20.92 - 76.14
Percent Solids By Weight 27.51 - 90.00
807JTM Acrylic polymer, Butyl acetate, Carbon black(0.3%),
Ethylbenzene(7.6%*@), Xylene(30%*@)
GAL WT: 8.16 WT PCT SOLIDS: 48.55 VOL PCT SOLIDS: 42.23
SECTION 10. Stability and reactivity SOLVENT DENSITY: 7.23 VOC LE: 4.2 VOC AP: 4.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Stability:
808JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.4%*@), Graphite,
Stable
synthetic, Primary amyl acetate, Xylene(34%*@)
GAL WT: 8.75 WT PCT SOLIDS: 43.79 VOL PCT SOLIDS: 32.22
Incompatibility (materials to avoid):
SOLVENT DENSITY: 7.15 VOC LE: 4.9 VOC AP: 4.9
None reasonably foreseeable
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Hazardous decomposition products:
CO, C02, smoke, and oxides of any heavy metals that are reported in
810JTM Acrylic polymer, Aluminum(15%*), Aromatic hydrocarbon-B, Butyl
"Composition, Information on Ingredients" section.
acetate, Ethylbenzene(7.0%*@), Medium mineral spirits, Xylene(28%*@)
GAL WT: 8.71 WT PCT SOLIDS: 46.57 VOL PCT SOLIDS: 35.10
Hazardous Polymerization:
SOLVENT DENSITY: 7.16 VOC LE: 4.7 VOC AP: 4.7
Will not occur.
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Sensitivity to Static Discharge:
For flammable materials (flashpoint less than 100 deg F) and combustibles
811JTM Acrylic polymer, Aluminum(26%*), Aromatic hydrocarbon-A,
(flashpoint between 100-200 deg F) if heated above the flashpoint, solvent
Aromatic hydrocarbon-B, Butyl acetate, Ethylbenzene(5.9%*@), Oleic
vapors in air may explode if static grounding and bonding is not used
acid, Stoddard solvent, Xylene(23%*@)
during transfer of this product.
GAL WT: 9.14 WT PCT SOLIDS: 49.18 VOL PCT SOLIDS: 36.67
SOLVENT DENSITY: 7.38 VOC LE: 4.6 VOC AP: 4.6
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC
Sensitivity to Mechanical Impact:
None known. TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
813JTM Acrylic polymer, Aluminum(19%*), Aromatic hydrocarbon-B, Butyl
SECTION 11. Additional Information acetate, Ethylbenzene(6.5%*@), Stoddard solvent, Xylene(26%*@)
GAL WT: 8.90 WT PCT SOLIDS: 47.16 VOL PCT SOLIDS: 32.82
SOLVENT DENSITY: 6.79 VOC LE: 4.7 VOC AP: 4.7
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC
801JTM Acrylic polymer, Aluminum hydrate, Amorphous silica, Butyl
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
acetate, Ethylbenzene(2.1 - 5.2%*@), Titanium dioxide(48.2%), Xylene(16
- 19%*@)
814JTM 1,2,4-trimethyl benzene(2%*), Acrylic polymer, Aluminum(23%*),
GAL WT: 13.34 WT PCT SOLIDS: 72.68 VOL PCT SOLIDS: 49.70
SOLVENT DENSITY: 7.23 VOC LE: 3.6 VOC AP: 3.6 Aromatic hydrocarbon-B, Butyl acetate, Ethylbenzene(6.8%*@), Stoddard
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC solvent, Xylene(27%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 9.15 WT PCT SOLIDS: 48.41 VOL PCT SOLIDS: 35.16
SOLVENT DENSITY: 7.37 VOC LE: 4.7 VOC AP: 4.7
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC
802JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.9%*@), Titanium
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
dioxide(4.6%), Xylene(27%*@)
GAL WT: 8.52 WT PCT SOLIDS: 53.58 VOL PCT SOLIDS: 45.57
SOLVENT DENSITY: 7.23 VOC LE: 4.0 VOC AP: 4.0
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 8
Material Safety Data Sheet
Specialty Additives
815JTM Acrylic polymer, Aluminum(1%*), Butyl acetate, SOLVENT DENSITY: 7.26 VOC LE: 5.6 VOC AP: 5.6
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Ethylbenzene(4.9%*@), Silica alumina ceramic, Xylene(19%*@)
GAL WT: 10.97 WT PCT SOLIDS: 68.29 VOL PCT SOLIDS: 52.02 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.22 VOC LE: 3.5 VOC AP: 3.5
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 828JTM Acrylic polymer, Butyl acetate, C.i. pigment blue 15 (monochlor),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Ethylbenzene(9.4%*@), Phthalocyanine blue pigment, Primary amyl
acetate, Xylene(37%*@)
816JTM 1,2,4-trimethyl benzene(2%*), Acrylic polymer, Aluminum(17%*), GAL WT: 8.09 WT PCT SOLIDS: 34.80 VOL PCT SOLIDS: 27.32
Aromatic hydrocarbon-B, Butyl acetate, Ethylbenzene(6.8%*@), Stoddard SOLVENT DENSITY: 7.27 VOC LE: 5.3 VOC AP: 5.3
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
solvent, Xylene(27%*@)
GAL WT: 8.76 WT PCT SOLIDS: 45.03 VOL PCT SOLIDS: 33.37 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.17 VOC LE: 4.8 VOC AP: 4.8
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC 829JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.3%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Phthalocyanine blue pigment, Primary amyl acetate, Xylene(33%*@)
GAL WT: 8.27 WT PCT SOLIDS: 42.80 VOL PCT SOLIDS: 34.80
818JTM Acrylic polymer, Butyl acetate, Ethylbenzene(4.7%*@), Silica SOLVENT DENSITY: 7.27 VOC LE: 4.7 VOC AP: 4.7
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
alumina ceramic, Xylene(19%*@)
GAL WT: 11.25 WT PCT SOLIDS: 70.41 VOL PCT SOLIDS: 54.16 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.23 VOC LE: 3.3 VOC AP: 3.3
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 830JTM Acrylic polymer, Butyl acetate, Ethylbenzene(9.2%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Phthalocyanine green, Primary amyl acetate, Xylene(36%*@)
GAL WT: 8.23 WT PCT SOLIDS: 36.68 VOL PCT SOLIDS: 28.25
819JTM Acrylic polymer, Aluminum(21%*), Aromatic hydrocarbon-B, Butyl SOLVENT DENSITY: 7.27 VOC LE: 5.2 VOC AP: 5.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
acetate, Ethylbenzene(6.8%*@), Stoddard solvent, Xylene(27%*@)
GAL WT: 9.00 WT PCT SOLIDS: 47.13 VOL PCT SOLIDS: 35.41 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.37 VOC LE: 4.8 VOC AP: 4.8
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC 831JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.4%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Phthalocyanine green, Xylene(29%*@)
GAL WT: 8.24 WT PCT SOLIDS: 49.94 VOL PCT SOLIDS: 43.23
820JTM Acrylic polymer, Butyl acetate, Carbazole violet pigment, SOLVENT DENSITY: 7.23 VOC LE: 4.1 VOC AP: 4.1
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Ethylbenzene(9.4%*@), Primary amyl acetate, Xylene(37%*@)
GAL WT: 7.96 WT PCT SOLIDS: 34.93 VOL PCT SOLIDS: 28.59 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.26 VOC LE: 5.2 VOC AP: 5.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 832JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.1%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Phthalocyanine green pigment, Primary amyl acetate, Xylene(32%*@)
GAL WT: 8.58 WT PCT SOLIDS: 44.29 VOL PCT SOLIDS: 34.21
821JTM Acrylic polymer, Butyl acetate, C.i. pigment blue 60, SOLVENT DENSITY: 7.23 VOC LE: 4.8 VOC AP: 4.8
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Ethylbenzene(8.6%*@), Primary amyl acetate, Xylene(34%*@)
GAL WT: 8.08 WT PCT SOLIDS: 40.57 VOL PCT SOLIDS: 33.80 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.25 VOC LE: 4.8 VOC AP: 4.8
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 833JTM Acrylic polymer, Azomethine copper-complex(7%*), Butyl acetate,
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Ethylbenzene(9.5%*@), Primary amyl acetate, Xylene(38%*@)
GAL WT: 7.99 WT PCT SOLIDS: 34.35 VOL PCT SOLIDS: 27.71
823JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.8%*@), Polyamine SOLVENT DENSITY: 7.26 VOC LE: 5.2 VOC AP: 5.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
polyester polymer, Primary amyl acetate, Proprietary copper
compound(10%*), Xylene(35%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 8.19 WT PCT SOLIDS: 37.94 VOL PCT SOLIDS: 29.99
SOLVENT DENSITY: 7.27 VOC LE: 5.1 VOC AP: 5.1 834JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.1%*@),
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC Phthalocyanine green, Polyamine polyester polymer, Xylene(28%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 8.52 WT PCT SOLIDS: 46.59 VOL PCT SOLIDS: 37.31
SOLVENT DENSITY: 7.24 VOC LE: 4.6 VOC AP: 4.6
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
824JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.2%*@),
Phthalocyanine blue pigment, Polyamine polyester polymer, Primary amyl TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
acetate, Xylene(33%*@)
GAL WT: 8.36 WT PCT SOLIDS: 40.62 VOL PCT SOLIDS: 31.58 841JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.6%*@),
SOLVENT DENSITY: 7.26 VOC LE: 5.0 VOC AP: 5.0 Isoindolinone yellow pigment, Primary amyl acetate, Xylene(30%*@)
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 8.60 WT PCT SOLIDS: 47.60 VOL PCT SOLIDS: 37.91
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.23 VOC LE: 4.5 VOC AP: 4.5
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
826JTM Acrylic polymer, Butyl acetate, Ethylbenzene(9.9%*@), TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Phthalocyanine blue pigment, Primary amyl acetate, Xylene(39%*@)
GAL WT: 7.97 WT PCT SOLIDS: 31.63 VOL PCT SOLIDS: 24.90 842JTM Acrylic polymer, Butyl acetate, Ethylbenzene(5.1%*@), Lead
SOLVENT DENSITY: 7.27 VOC LE: 5.4 VOC AP: 5.4 sulfochromate yellow(45.0%*@), Xylene(20%*@)
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 12.63 WT PCT SOLIDS: 66.09 VOL PCT SOLIDS: 41.02
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.23 VOC LE: 4.3 VOC AP: 4.3
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
827JTM Acrylic polymer, Butyl acetate, Ethylbenzene(10.2%*@), TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Phthalocyanine blue, Primary amyl acetate, Xylene(41%*@)
GAL WT: 7.94 WT PCT SOLIDS: 28.99 VOL PCT SOLIDS: 22.29
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 9
Material Safety Data Sheet
Specialty Additives
843JTM Acrylic polymer, Butyl acetate, C.i. pigment yellow 154, SOLVENT DENSITY: 7.26 VOC LE: 5.0 VOC AP: 5.0
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Ethylbenzene(7.8%*@), Primary amyl acetate, Xylene(31%*@)
GAL WT: 8.47 WT PCT SOLIDS: 46.00 VOL PCT SOLIDS: 37.03 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.28 VOC LE: 4.6 VOC AP: 4.6
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 864JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.9%*@), Pigment
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES red 202, Primary amyl acetate, Quinacridone pigment, Xylene(36%*@)
GAL WT: 8.09 WT PCT SOLIDS: 38.35 VOL PCT SOLIDS: 31.26
844JTM Acrylic polymer, Aluminum oxide(1%*), Amorphous silica, SOLVENT DENSITY: 7.27 VOC LE: 5.0 VOC AP: 5.0
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
Antimony trioxide(1.0%*@), Butyl acetate, Ethylbenzene(4.7%*@), Lead
chromates(37.3%*@), Xylene(19%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 12.54 WT PCT SOLIDS: 69.76 VOL PCT SOLIDS: 47.76
SOLVENT DENSITY: 7.23 VOC LE: 3.8 VOC AP: 3.8 866JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.2%*@), Primary
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC amyl acetate, Quinacridone pigment, Xylene(32%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 8.25 WT PCT SOLIDS: 43.99 VOL PCT SOLIDS: 36.37
SOLVENT DENSITY: 7.23 VOC LE: 4.6 VOC AP: 4.6
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
845JTM 2-methyl butyl acetate, Acrylic polymer, Butyl acetate,
Ethylbenzene(10.4%*@), Primary amyl acetate, Tetrachloroisonsolinone TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
yellow pigment, Xylene(41%*@)
GAL WT: 7.91 WT PCT SOLIDS: 27.51 VOL PCT SOLIDS: 20.92 867JTM Acrylic polymer, Butyl acetate, Ethylbenzene(8.3%*@), Primary
SOLVENT DENSITY: 7.26 VOC LE: 5.7 VOC AP: 5.7 amyl acetate, Quinacridone pigment, Xylene(33%*@)
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 8.29 WT PCT SOLIDS: 42.68 VOL PCT SOLIDS: 34.54
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.27 VOC LE: 4.7 VOC AP: 4.7
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
846JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.4%*@), TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
Isoindolinone pigment, Primary amyl acetate, Xylene(29%*@)
GAL WT: 8.68 WT PCT SOLIDS: 48.90 VOL PCT SOLIDS: 38.85 868JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.5%*@), Pigment
SOLVENT DENSITY: 7.16 VOC LE: 4.4 VOC AP: 4.4 red 202, Primary amyl acetate, Propylene carbonate, Quinacridone
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC pigment, Tetrahydrofuran, Xylene(30%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 8.33 WT PCT SOLIDS: 42.25 VOL PCT SOLIDS: 34.50
SOLVENT DENSITY: 7.36 VOC LE: 4.8 VOC AP: 4.8
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
850JTM Acrylic polymer, Butyl acetate, C.i. pigment red 254,
Ethylbenzene(7.7%*@), Primary amyl acetate, Xylene(30%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 8.49 WT PCT SOLIDS: 47.30 VOL PCT SOLIDS: 38.35
SOLVENT DENSITY: 7.27 VOC LE: 4.5 VOC AP: 4.5 869JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.5%*@),
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC Quinacridone pigment, Xylene(26%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 8.75 WT PCT SOLIDS: 53.69 VOL PCT SOLIDS: 44.41
SOLVENT DENSITY: 7.27 VOC LE: 4.1 VOC AP: 4.1
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
851JTM Acrylic polymer, Butyl acetate, Ethylbenzene(5.3%*@), Lead
chromate molybdate(35.1%*@), Xylene(21%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 11.43 WT PCT SOLIDS: 64.54 VOL PCT SOLIDS: 44.21
SOLVENT DENSITY: 7.23 VOC LE: 4.1 VOC AP: 4.1 870JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.1%*@),
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC Xylene(28%*@)
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 8.24 WT PCT SOLIDS: 52.01 VOL PCT SOLIDS: 45.57
SOLVENT DENSITY: 7.23 VOC LE: 4.0 VOC AP: 4.0
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
853JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.9%*@), Monoazo
pigment, Primary amyl acetate, Xylene(31%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 8.49 WT PCT SOLIDS: 45.33 VOL PCT SOLIDS: 36.04
SOLVENT DENSITY: 7.28 VOC LE: 4.6 VOC AP: 4.6 878JTM Acrylic polymer, Aluminum(15%*), Butyl acetate,
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC Ethylbenzene(8.0%*@), Hydrotreated heavy naphtha (petroleum), Iron
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES oxide-A, Xylene(20%*@)
GAL WT: 9.07 WT PCT SOLIDS: 52.86 VOL PCT SOLIDS: 39.34
855JTM Acrylic polymer, Butyl acetate, Ethylbenzene(9.0%*@), Perylene SOLVENT DENSITY: 7.02 VOC LE: 4.3 VOC AP: 4.3
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
pigment, Primary amyl acetate, Xylene(36%*@)
GAL WT: 8.14 WT PCT SOLIDS: 37.56 VOL PCT SOLIDS: 29.98 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.27 VOC LE: 5.1 VOC AP: 5.1
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 881JTM Acrylic polymer, Butyl acetate, Ethylbenzene(5.5%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Xylene(22%*@), Yellow iron oxide
GAL WT: 11.49 WT PCT SOLIDS: 63.03 VOL PCT SOLIDS: 41.48
858JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.6%*@), Perylene SOLVENT DENSITY: 7.23 VOC LE: 4.2 VOC AP: 4.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
pigment, Xylene(30%*@)
GAL WT: 8.32 WT PCT SOLIDS: 47.98 VOL PCT SOLIDS: 40.45 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
SOLVENT DENSITY: 7.23 VOC LE: 4.3 VOC AP: 4.3
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 882JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.8%*@),
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Xylene(27%*@), Yellow iron oxide
GAL WT: 8.75 WT PCT SOLIDS: 53.91 VOL PCT SOLIDS: 44.51
862JTM Acrylic polymer, Butyl acetate, Ethylbenzene(9.0%*@), Primary SOLVENT DENSITY: 7.23 VOC LE: 4.0 VOC AP: 4.0
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC
amyl acetate, Quinacridone magenta, Quinacridone pigment,
Xylene(36%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
GAL WT: 8.04 WT PCT SOLIDS: 37.99 VOL PCT SOLIDS: 31.29
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 10
Material Safety Data Sheet
Specialty Additives
884JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.9%*@), Red iron SOLVENT DENSITY: 7.53 VOC LE: 2.2 VOC AP: 2.2
FLASH POINT: Above 200 F H: 1 F: 1 R: 0 OSHA STORAGE: IIIB
oxide light, Xylene(27%*@)
GAL WT: 8.60 WT PCT SOLIDS: 53.68 VOL PCT SOLIDS: 45.18 TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
SOLVENT DENSITY: 7.23 VOC LE: 4.0 VOC AP: 4.0
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC 1003STM Ethylene glycol monobutyl ether(10%*), Iron oxide-A, Mica,
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES Weather resistant mixture
GAL WT: 21.60 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.16
885JTM Acrylic polymer, Barium sulfate, Butyl acetate, SOLVENT DENSITY: 7.53 VOC LE: 2.2 VOC AP: 2.2
Ethylbenzene(7.1%*@), Perylene maroon, Propylene carbonate, FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
Xylene(28%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
GAL WT: 8.60 WT PCT SOLIDS: 48.02 VOL PCT SOLIDS: 38.87
SOLVENT DENSITY: 7.29 VOC LE: 4.5 VOC AP: 4.5 1004STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC dioxide(44.0%), Weather resistant mixture
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 21.19 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.74
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB
886JTM Acrylic polymer, Butyl acetate, Ethylbenzene(7.0%*@),
Quinacridone pigment, Xylene(28%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
GAL WT: 8.49 WT PCT SOLIDS: 49.25 VOL PCT SOLIDS: 40.94
SOLVENT DENSITY: 7.27 VOC LE: 4.3 VOC AP: 4.3 1005STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC dioxide(36.0%), Weather resistant mixture
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES GAL WT: 20.75 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 72.38
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB
890JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.5%*@), Iron
oxide-B, Xylene(26%*@) TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
GAL WT: 9.55 WT PCT SOLIDS: 55.45 VOL PCT SOLIDS: 41.37
SOLVENT DENSITY: 7.23 VOC LE: 4.3 VOC AP: 4.3 1006STM Ethylene glycol monobutyl ether(10%*), Iron oxide-A, Mica
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 21.60 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.20
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.53 VOC LE: 2.2 VOC AP: 2.2
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB
891JTM Acrylic polymer, Butyl acetate, Ethylbenzene(6.7%*@), Iron TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
oxide-A, Xylene(27%*@)
GAL WT: 9.33 WT PCT SOLIDS: 54.36 VOL PCT SOLIDS: 41.35 1007STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
SOLVENT DENSITY: 7.23 VOC LE: 4.3 VOC AP: 4.3 dioxide(43.0%), Weather resistant mixture
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 21.19 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.79
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB
893JTM Acrylic polymer, Butyl acetate, C.i. pigment brown, TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Ethylbenzene(9.4%*@), Primary amyl acetate, Xylene(37%*@)
GAL WT: 8.05 WT PCT SOLIDS: 34.97 VOL PCT SOLIDS: 27.92 1008STM Chromium(iii) oxide (2:3)(11%*@), Ethylene glycol monobutyl
SOLVENT DENSITY: 7.27 VOC LE: 5.2 VOC AP: 5.2 ether(10%*), Mica, Titanium dioxide(47.5%), Weather resistant mixture
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 0 OSHA STORAGE: IC GAL WT: 23.26 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 68.96
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES SOLVENT DENSITY: 7.53 VOC LE: 2.3 VOC AP: 2.3
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
894JTM 1,2,4-trimethyl benzene(1%*), Acrylic polymer, Aluminum(22%*), TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Aromatic hydrocarbon-B, Butyl acetate, Ethylbenzene(7.1%*@), Stoddard
solvent, Xylene(28%*@) 1009STM Ethylene glycol monobutyl ether(10%*), Mica coated with tio2
GAL WT: 9.09 WT PCT SOLIDS: 46.75 VOL PCT SOLIDS: 33.81 GAL WT: 22.12 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 70.54
SOLVENT DENSITY: 7.27 VOC LE: 4.8 VOC AP: 4.8 SOLVENT DENSITY: 7.53 VOC LE: 2.2 VOC AP: 2.2
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
895JTM 1,2,4-trimethyl benzene(2%*), Acrylic polymer, Aluminum(22%*), 1010STM Ethylene glycol monobutyl ether(10%*), Iron oxide-A, Mica,
Aromatic hydrocarbon-B, Butyl acetate, Ethylbenzene(6.4%*@), Stoddard Weather resistant mixture
solvent, Xylene(26%*@) GAL WT: 29.15 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 61.09
GAL WT: 9.16 WT PCT SOLIDS: 50.88 VOL PCT SOLIDS: 37.69 SOLVENT DENSITY: 7.53 VOC LE: 2.9 VOC AP: 2.9
SOLVENT DENSITY: 7.16 VOC LE: 4.5 VOC AP: 4.5 FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
FLASH POINT: 73 F to below 100 F H: 2 F: 3 R: 1 OSHA STORAGE: IC TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: YES
1011STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
1001STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium dioxide(37.0%)
dioxide(26.5%) GAL WT: 21.19 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.78
GAL WT: 20.75 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 72.36 SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1 FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1012STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
1002STM Ethylene glycol monobutyl ether(10%*), Iron oxide-A, Mica, dioxide(55.5%), Weather resistant mixture
Weather resistant mixture GAL WT: 21.28 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 71.70
GAL WT: 21.98 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 73.03
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
MSDS 19.5
DuPont Performance Coatings January 1, 2008
Mastertint R and Mastertint R
Page: 11
Material Safety Data Sheet
Specialty Additives
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1 Titanium dioxide(52.1%), Weather resistant mixture
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A GAL WT: 22.53 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 72.20
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO SOLVENT DENSITY: 6.50 VOC LE: 2.3 VOC AP: 2.3
FLASH POINT: Above 200 F H: 1 F: 1 R: 0 OSHA STORAGE: IIIB
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1013STM Chromium hydroxide(1%*@), Heavy mineral spirits, Mica,
Titanium dioxide (rutile)(39.6%)
GAL WT: 21.69 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 67.99 Footnotes:
SOLVENT DENSITY: 6.50 VOC LE: 2.2 VOC AP: 2.2 TSCA: in compliance = In compliance with TSCA Inventory requirements
FLASH POINT: Above 200 F H: 2 F: 1 R: 0 OSHA STORAGE: IIIB for commercial purposes.
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO ACGIH = American Conference of Governmental Industrial Hygienists.
IARC = International Agency for Research on Cancer.
NTP = National Toxicology Program.
1014STM Ethylene glycol monobutyl ether(10%*), Mica, Titanium
OSHA = Occupational Safety and Health Administration.
dioxide(40.0%), Weather resistant mixture
PNOR = Particles not otherwise regulated.
GAL WT: 20.83 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 72.30
PNOC = Particles not otherwise classified.
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
STEL = Short term exposure limit.
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
TWA = Time-weighted average.
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
TM = Is a Trademark of E.I. DuPont de Nemours Co.
* = Section 313 Supplier Notification: These chemicals are subject to the
1015STM Chromium(iii) oxide (2:3)(10%*@), Ethylene glycol monobutyl reporting requirements of Section 313 of the Emergency planning and
ether(10%*), Mica, Titanium dioxide(38.0%), Weather resistant mixture Right-to-Know act of 1986 and of 40 CFR 372.
GAL WT: 23.26 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 69.01 @ = Listed as a Clean Air Act Hazardous Air Pollutant.
SOLVENT DENSITY: 7.53 VOC LE: 2.3 VOC AP: 2.3 # = EPCRA Section 302 - Extremely hazardous substances.
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
Notice:
The information on this Material Safety Data Sheet relates only to the
TM
1018S Ethylene glycol monobutyl ether(10%*), Mica, Tin oxide, Titanium specific material designated herein and does not relate to use in
dioxide(38.0%) combination with any other material or in any process.
GAL WT: 20.83 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 72.30
SOLVENT DENSITY: 7.53 VOC LE: 2.1 VOC AP: 2.1
Product Manager: Refinish Sales
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
Prepared by: Y. B. Yarbrough
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1019STM Ethylene glycol monobutyl ether(10%*), Iron oxide-A, Mica,
Weather resistant mixture, Zirconium oxide
GAL WT: 22.47 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 70.12
SOLVENT DENSITY: 7.53 VOC LE: 2.2 VOC AP: 2.2
FLASH POINT: No measurable H: 2 F: 0 R: 0 OSHA STORAGE: N/A
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1020STM Aluminum oxide(59%*), Amorphous silica, Heavy mineral spirits,
Titanium dioxide(23.0%), Weather resistant mixture
GAL WT: 23.31 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 64.52
SOLVENT DENSITY: 6.50 VOC LE: 2.3 VOC AP: 2.3
FLASH POINT: 141 F - 200 F H: 1 F: 2 R: 0 OSHA STORAGE: IIIA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1021STM Aluminum oxide(47%*), Amorphous silica, Heavy mineral spirits,
Titanium dioxide(35.1%), Weather resistant mixture
GAL WT: 24.15 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 60.80
SOLVENT DENSITY: 6.50 VOC LE: 2.4 VOC AP: 2.4
FLASH POINT: 141 F - 200 F H: 1 F: 2 R: 0 OSHA STORAGE: IIIA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1023STM Aluminum oxide(44%*), Amorphous silica, Heavy mineral spirits,
Iron oxide-A, Weather resistant mixture
GAL WT: 24.15 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 62.83
SOLVENT DENSITY: 6.50 VOC LE: 2.4 VOC AP: 2.4
FLASH POINT: 141 F - 200 F H: 1 F: 2 R: 0 OSHA STORAGE: IIIA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1024STM Aluminum oxide(39%*), Amorphous silica, Heavy mineral spirits,
Tin oxide, Titanium dioxide(41.0%), Weather resistant mixture
GAL WT: 18.33 WT PCT SOLIDS: 90.00 VOL PCT SOLIDS: 76.14
SOLVENT DENSITY: 6.50 VOC LE: 1.8 VOC AP: 1.8
FLASH POINT: 141 F - 200 F H: 1 F: 2 R: 0 OSHA STORAGE: IIIA
TSCA STATUS: In Compliance PHOTO-CHEMICALY REACTIVE: NO
1025STM Aluminum oxide(32%*), Amorphous silica, Heavy mineral spirits,
Copyright 2007 E. I. duPont de Nemours and Company. All rights reserved. Copies may be made only for those using DuPont products.
|