Material Safety Data Sheet
This MSDS is prepared in accordance with OSHA 1910.1200, Canadian WHMIS, and ANSI .
WHMIS Class D-2B: Material causing other toxic effects HCS Class: Irritating substance.
(TOXIC).
WHMIS (Pictograms) WHMIS (Classification) HCS
Section 1. Chemical Product and Company Identification
Product Name/ Emulsion Satin Code
B1619
Trade name
Mixture.
CAS #
Not available.
Synonym
Validation Date 10/21/2008
Not available.
Chemical Family
10/21/2008
Print Date
Chemical Formula Not applicable.
In Case of CHEMTREC (800) 424-9300
Manufacturer/ Supplier Basic Coatings Emergency
1001 Brown Avenue
Toledo, Ohio
(800) 247-5471
TSCA Inventory: All components listed or are exempt from listing.
TSCA
Protective Clothing
DSL/ NDSL All components listed unless noted elsewhere on this MSDS
Section 2. Composition and Information on Ingredients
Name CAS # Exposure Limits
% by LC50/LD50
Weight
Water 7732-18-5 >60 Not available. Not available.
Polyurethane Resins N/A 25 -40 Not available. Not available.
N-Methyl-2-Pyrrolidone 872-50-4 1-5 Not available. Not available.
Dimethylethanolamine 108-01-0 1-5 Not available.
ACGIH TLV (United
States).
TWA: 5 ppm 8 hour(s).
STEL: 25 ppm 15
minute(s).
Dipropylene Glycol Methyl Ether 34590-94-8 <1 Not available.
ACGIH TLV (United
States).
TWA: 100 ppm 8
hour(s).
STEL: 150 ppm 15
minute(s).
Section 3. Hazards Identification
Irritation of the product in case of eye contact: Irritant. May aggravate existing eye disorders
Potential Acute Health
Irritation of the product in case of skin contact: Cases drying of the Skin. May aggravate
Effects
existing skin conditions.
Potential Chronic Health Repeated skin exposure can produce local skin destruction, or dermatitis.
Effects
Carcinogenic Effects Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.
Section 4. First Aid Measures
Check for and remove any contact lenses. In case of contact, immediately flush eyes with
Eye Contact
plenty of water for at least 15 minutes. Get medical attention.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing
Skin Contact
and shoes. Wash clothing before reuse.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is
Inhalation
difficult, give oxygen. Get medical attention.
Contact a poison control center immediately for treatment adivce. Do not induce vomiting
Ingestion
unless instructed to do so be poison control center or doctor. Do not give anything to by
mouth to an unconscious person.
Section 5. Fire Fighting Measures
Not available.
Products of Combustion
SMALL FIRE: Use DRY chemical powder.
Fire Fighting Media
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
and Instructions
Not available.
Special Remarks on Fire
Hazards
Not available.
Special Remarks on
Explosion Hazards
Section 6. Accidental Release Measures
Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Small Spill and Leak
Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large Spill and Leak
Splash goggles. Boots. Gloves. Light protective clothing. Wear appropriate respirator when
Personal Protection in
ventilation is inadequate.
Case of a Large Spill
Section 7. Handling and Storage
Keep away from heat. Do not breathe gas/fum es/ vapor/spray. Keep away from
Precautions
incompatibles such as oxidizing agents, acids, alkalis.
Reactive with oxidizing agents, acids, alkalis.
Incompatibility
Keep container tightly closed. Keep container in a cool, well-ventilated area. S2- Keep out of
Storage
the reach of children.
Section 8. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations
Engineering Controls
of vapors below their respective occupational exposure limits.
Personal Protection
Eyes Safety glasses.
Body No special protective clothing is required.
Respiratory A respirator is not needed under normal and intended conditions of product use.
Hands Impervious gloves.
Protective Clothing
(Pictograms)
See Section 2 For Applicable Exposure Limits
Exposure Limits
Section 9. Physical and Chemical Properties
Liquid.
Physical State and Characteristic.
Odor
Appearance
Taste Not available.
Not applicable.
Molecular Weight
White to yellowish.
Color
Not applicable.
pH
The lowest known value is 192.78癈 (379癋)
Boiling/Condensation
Point
Not available.
Melting/Freezing Point
Not available.
Critical Temperature
Not available.
Instability Temperature
1.0488 (Water = 1)
Specific Gravity
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Volatility
<275 g/Liter
VOC
<1 compared to Butyl acetate.
Evaporation Rate
Not available.
Dispersion Properties
Miscible in water.
Solubility
May be combustible at high temperature.
The Product is:
Not available.
Auto-ignition
Temperature
Closed cup: >176.67癈 (350癋).
Flash Points
Not available.
Flammable Limits
Fire Hazards in Presence Not available.
of Various Substances
Not available.
Explosion Hazards in
Presence of Various
Substances
Section 10. Stability and Reactivity Data
The product is stable.
Stability
Reactive with oxidizing agents, acids, alkalis.
Incompatibility with
Various Substances
Hazardous Decomposition Not available.
Products
Section 11. Toxicological Information
Not available.
Routes of Entry
LD50: Not available.
Toxicity to Animals
LC50: Not available.
Acute Effects on Humans
Eyes Not available.
Skin Irritation of the product in case of skin contact: Not available. Sensitization of the product: Not
available.
Inhalation Not available.
Ingestion Not available.
Repeated skin exposure can produce local skin destruction, or dermatitis.
Chronic Effects on
Humans
Not available.
Special Remarks on
Toxicity to Animals
Not available.
Special Remarks on
Chronic Effects on
Humans
Section 12. Ecological Information
Not available.
Ecotoxicity
Not available.
BOD5 and COD
Not available.
Products of
Biodegradation
Toxicity of the Products of Not available.
Biodegradation
Not available.
Special Remarks on the
Products of
Biodegradation
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control
Waste Information
regulations.
Not available.
Waste Stream
Section 14. Transport Information
DOT (U.S.A)
(Pictograms)
-
TDG Classification
PIN UN, Proper Shipping Not applicable.
Name, PG
Maritime Transportation Not available.
Not available.
Special Provisions for
Transport
Section 15. Other Regulatory Information and Pictograms
WHMIS Class D-2B: Material causing other toxic effects (TOXIC).
WHMIS (Classification)
No products were found.
Regulatory Lists
Not available. or of its ingredients
Other Regulations
HCS Class: Irritating substance.
Other Classifications HCS (U.S.A.)
WARNING: This product contains chemical(s) known to the state of
USA Regulatory
California to cause cancer, birth defects or other reproductive harm:
Lists
Hydrazine; N-Methyl-2-Pyrrolidone
WARNING: This product contains chemical(s) known to the state of
California to cause birth defects or other reproductive harm.:
N-Methyl-2-Pyrrolidone
SARA 311/312 MSDS distribution - chemical inventory - hazard
identification: N-Methyl-2-Pyrrolidone
SARA 313 toxic chemical notification and release reporting:
N-Methyl-2-Pyrrolidone 4.97%
This product is not classified according to the EU regulations.
DSD (EEC)
International No products were found.
Regulations Lists
Hazardous Material 1 National Fire
Health
Flammability
1
Information System 1 Protection
Flammability
1 0
(U.S.A.) Instability
Health
0 Association
Physical Hazard
(U.S.A.)
The Hazard Ranking systems presented on this MSDS provide only a quick reference for hazard information. The ENTIRE Specific Hazard
MSDS must be consulted to determine any specific hazards, First Aid measures, and PPE associated with this product.
Section 16. Other Information
Validated by LMorsch on 10/21/2008. Verified by LMorsch.
Printed 10/21/2008.
Information Contact Basic Coatings
1001 Brown Avenue
Toledo, Ohio
(800) 247-5471
Notice to Reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with
caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
Page: 6/6
Validated on 10/21/2008. Emulsion Satin
|