MDC SlickBondTM MATERIAL SAFETY DATA SHEET
Water-Based Acrylic Primer MCT20060824
MDC Wallcoverings Medical & Transport Emergency:
1200 Arthur Ave INFOTRAC 800-535-5053
Elk Grove, IL 60007
800-621-4006
www.MDCWallFinishes.com
MSDS Date: 07-15-2001 Supersedes: All Previous
Product Identification
Trade Name: MDC PrimeSealTM Primer DOT Classification: Not Regulated
Chemical Family: Water Based Acrylic Primer CAS Number: Mixture
Physical Data
Boiling Range (F): 212 to 396 Solubility in Water: Yes
Vapor Density (Air=1): >1 VOC: <100 g/L <1 lb/gal
Vapor Pressure: NA Appearance & Odor: White color, sweet smell
Evaporation Rate: Slower than ether Weight per Gallon: 10.3 lb
Hazardous Ingredients
Ingredient OSHA PEL ACGIH TLV CAS Number
Ammonium Hydroxide 1336-21-6
Propylene Glycol None Established None Established 56-55-6
Esther Alcohol None Established None Established
N-Methyl Pyrrolidone None Established None Established 872-50-4
Triethylamine 121-44-8
Acrylic Polymer Trade Secret
Polyurathane Dispersion Trade Secret
Magnesium Silicate (Talc) 14807-96-6
Titanium Dioxide 13463-67-7
This paint mixture contains titanium dioxide and/or other pigments classified by ACGIH as "nuisance
dusts." Exposures to spray mist or sanding dust should be controlled to below 10mg/m3 through
usage of NIOSH/ MSHA TC23C or equivalent approved dust filter respirators. Follow respirator
manufacturer's directions for use. A paint preservative is present, but is not hazardous at the level of
usage.
HMIS RATING: Health=1 Flamability=1 Reactivity=0
*User should determine appropriate personal protective equipment based on use conditions.
Fire & Explosion Hazard Data Fire Extinguishing Media
Flash Point: NA Not required
LEL: NA
Special Fire Fighting Procedures: Containers exposed to heat should be kept cool with water.
Unusual Fire and Explosion Hazards: Closed containers may explode due to steam pressure.
Reactivity Data
This product is stable under normal (Ambient) conditions and hazardous polymerization will not occur.
Hazardous Decomposition Products: By high heat and fire: CO2, CO and other toxic vapors and mist.
Conditions or materials to Avoid: Avoid extreme heat.
MDC SlickBond MSDS
1
MDC SlickBondTM MATERIAL SAFETY DATA SHEET
Water-Based Acrylic Primer MCT20060824
Health Hazard Data
Entry Routes: Inhalation, Ingestion, Skin Contact, Eye Contact
Effects of Overexposure
Inhalation: Dizziness, headache, nausea.
Ingestion: Can result in irritation in the mouth, stomach tissue and digestive tract. Symptoms can
include sore throat, abdominal pain, nausea, vomiting and diarrhea.
Skin Contact: Prolonged contact can result in dry, cracked skin.
Eye contact: Liquid and vapors are irritating to the eyes and can cause pain, tearing, reddening and
swelling. However, damage is usually reversible.
Medical Conditions Aggravated by Exposure: None known. Consult your physician.
EMERGENCY FIRST AID PROCEDURES
Eye contact: Immediately flush eyes for 15 minutes occasionally lifting eyelids. If victim wears
contact lenses, remove lenses and continue rinsing. Clean lenses before reusing. If irritation
continues, consult a physician.
Skin contact: Wash effected area thoroughly with mild soap and water. If irritation develops and
persists, consult a physician.
Inhalation: Move to fresh air if necessary. If irritation persists, consult a physician. If victim is not
breathing, artificial respiration should be administered by qualified personnel. Seek immediate
medical attention.
Ingestion: DO NOT INDUCE VOMITING. Give 1-2 glasses of water to dilute. Consult a physician
immediately.
Spill or Leak Procedures
Spills: Ventilate area. For small spills, dilute 50 to 100 fold with water. For larger spills, dike the area
with absorbent and scoop up.
Waste Disposal: Dispose of as permitted by appropriate government regulations.
Special Protection Information
Handling and Storage: Do not reseal if contamination is suspected. Employee education and training
in safe handling of this product is required under OSHA Hazard Communication Standard. Keep from
freezing.
Respiratory Protection: Use appropriate MAHA/NIOSH approved respirator in areas with poor
ventilation and when exposed to spray mists or sanding dusts.
Ventilation: Local exhaust.
Protective Gloves: Recommended to prevent extended exposure.
Eye Protection: Safety glasses are recommended.
MDC SlickBond MSDS
2
MDC SlickBondTM MATERIAL SAFETY DATA SHEET
Water-Based Acrylic Primer MCT20060824
Disclaimer
The information in this MSDS was obtained from sources we believe are reliable. However, the
information is provided without any representation or warranty, expressed or implied, regarding its
accuracy or completeness.
The conditions of handling, storage, use and disposal of the product are beyond our control and may
be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly
disclaim liability for loss, damage or expense arising out of or in any way connected with the handling,
storage, use or disposal of this product.
Disposal of containers should be in accordance with applicable federal, state and local laws and
regulations.
MDC SlickBond MSDS
3
|