NIKAL
®
INDUSTRIAL
HIGH TEMPERATURE ANTI-SEIZE
AND GASKET COMPOUND
PR ODUCT CHARACTERISTICS
PRODUCT CHARACTERISTICS
DESCRIPTION
NIKAL ® is a premium quality anti-seize and gasket com- Thickener Aluminum Complex
pound for use in extreme temperatures and hostile environ- Fluid Type Petroleum
ments. The carrier of this remarkable compound volatilizes Color/Appearance Silver/Grey Paste
upon exposure to high temperatures and deposits a nickel
Dropping Point (ASTM D-566) 450°F (232°C)
metallic plating on threaded connections, preventing metal-to-
Specific Gravity 1.10
metal contact and guarding against seizing and galling.
Density (lb/gal) 9.20
INDUSTRIAL
Oil Separation <5.0
NIKAL contains pure nickel flake and a nearly inert dispers-
ing solid in a high quality aluminum complex base grease that WT. % LOSS @ 212°F (100°C)
provides unsurpassed protection from rust by water penetra- Flash Point (ASTM D-92) >430°F (221°C)
tion or water washoff. K-Factor .15
High Chrome Alloys @ 60,000 PSI Contact Stress
NIKAL does not contain copper, lead, graphite, chlorides or
NLGI Grade 1½
other halogens, phosphorus, or silicones. It may be safely
Penetration @77°F (ASTM D-217) 300 - 315
used with ammonia, acetylene and vinyl monomers, which are
Copper Strip Corrosion 1A
unstable in the presence of copper. NIKAL contains no graph-
ite, which is an additional benefit on stainless steel applica- (ASTM D-4048)
tions when temperatures exceed 550°F, as graphite can car- Shell 4-Ball (ASTM D-2596)
burize the steel causing the steel to become much more sus- Weld Point, kgf 200
ceptible to intergranular corrosion. The solids package in Load Wear Index Not Applicable
NIKAL produces a matrix of particles that settle in succes-
Salt Fog Resistance (ASTM B-117) +200
sive layers or “sandwich.� This allows the solids to serve as a
20% NaCl @ 100°F, Hrs. Free of Corrosion
lubricant, cushion and seal. This layering does not allow the
INDUSTRIAL
welding under compaction that leads to seizure and galling.
� Contains no lead, copper or graphite
PACKAGING
CKAGING
� Prevents seizure up to 2600°F (1427°C)
� Protects against rust and corrosion Code No. Container Size Container
� Chemically inert
13655 ¼ lb. Brush Top can
� Acid resistant
13602 ½ lb. Brush Top can
� Strong resistance to water washoff
13604 1 lb. Brush Top can
� Brushable to 0°F (-18°F)
13607 2 lb. Plug Top can
� Will not run, drip or settle out.
� Color - Silver 13623 8 lb. Pail
13613 20 lb. Pail
APPLICATIONS
APPLICATIONS 13615 40 lb. Pail
Used extensively in refineries, chemical plants, petrochemical
plants, power generation facilities and other harsh environ-
ments on items such as:
LIMITED WARRANTY
INDUSTRIAL
Jet-Lube, Inc. makes the Limited Express Warranty that at the date of
Burner Tips Reactor Bolts delivery, this product shall be free from defects in Jet-Lube, Inc. materials
Heat Exchangers Manifolds and workmanship.
Furnace Hinges Manhole Studs This Limited Express Warranty is expressly in lieu of any other express
Pipe Fittings or implied warranties, including any implied warranty of merchantability or
fitness for a particular purpose, and of any other obligation on the part of
NOT FOR USE ON OXYGEN LINES. Jet-Lube, Inc.
The sole remedy for breach of the Limited Express Warranty shall be the
refund of the purchase price. All other liability is negated and disclaimed,
CONFORMS TO: SERVICE RATING:
and Jet-Lube, Inc. shall not be liable for incidental or consequential dam-
Military Specification -65°F (-54°C) to
ages.
MIL-PRF-907E 2600°F (1427°C)
CORPORATE LOCATIONS
Houston, Texas–World Headquarters
Maidenhead, England Edmonton, Canada
INDUSTRIAL
JET-LUBE, INC. WATS: 800-538-5823
4849 HOMESTEAD RD., PHONE: 713-674-7617
P.O. BOX 21258 (77226-1258) FAX: 713-678-4604
HOUSTON, TX 77028 E-MAIL: sales@jetlube.com
www.jetlube.com
JET-LUBE, INC.
MATERIAL SAFETY DATA SHEET
Product Name: NIKAL® Manufacturer/Supplier: JET-LUBE, INC.
Chemical Family: Petroleum based lubricating grease Address: 4849 Homestead Rd., Ste. #200
Use: Anti-seize lubricant Houston, TX, 77028 USA Phone: 713-674-7617
I
Emergency Phone: 713-674-7617 Fax: 713-678-4604
Chemtrec 24 hours (USA): 800-424-9300
Other Limits
Hazardous Components CAS No. Wt% OSHA PEL ACGIH TLV of Exposure
Petroleum oil 64742525/64742570 60-100 Oil mist N/A STEL: N/A
TWA-5mg/M3
1mg/M3 1mg/M3
II
Nickel Powder 7440020 20-30
Nonhazardous Blend 82980549/12003382 10-20 UN UN UN
Main Hazards–Health Effects
III
Eyes: May cause irritation. Inhalation: Viscous nature may block breathing passages if inhaled. Ingestion: May cause diarrhea.
Skin: For hypersensitive persons, may irritate the skin after prolonged periods of contact.
Eyes: Flush with water until all residual material is gone. If irritation persists, seek medical help. Inhalation: Clear air passage. If
IV
respiratory difficulty continues, seek medical help. Ingestion: Wash out mouth immediately. Consult physician. Skin: Wash thoroughly
with hand cleanser, followed by soap & water. Contaminated clothing should be dry cleaned before reuse.
Extinguishing Media: Foam, dry powder, Halon®, carbon dioxide, sand, earth & water mist.
V
Unsuitable Extinguishing Media: Water jet. Protective Equipment for Fire fighting: Self-contained breathing apparatus.
Personal Precautions: Wear gloves & protective overalls. Environmental Precautions: Do not allow it to enter drains. Spillage:
VI
Scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth.
VII
Handling: No special handling precautions necessary. Storage: Do not store at elevated temperatures.
Respiratory Protection: None needed. Hand Protection: Protective gloves for hypersensitive persons.
VIII
Eye Protection: Glasses, if applied to parts in motion. Body Protection: Overalls.
Physical State: Semisolid paste Color: Silver Odor: Petroleum pH: Neutral Boiling Range/Point °F (°C): <600 (316)
Melting Point °F (°C): 450 (232) Flash Point (COC) °F (°C): 430 (221) Autoignition Temperature °F (°C): >500 (260)
IX
Explosive Properties: LEL: 0.9% UEL: 7% Evaporation Rate (Butyl Acetate): <0.01 Partition Coefficient (Log Pow): N/A
Density (g/cm3): 1.10 Flammability: Not flammable at ambient temp.
Vapor Pressure (kPa): <0.01 Percent Volatiles: Nil
OAR Value: N/A Oxidizing Properties: None Water Solubility: Nil Vapor Density: >5
Stability: Chemically stable under normal conditions. No photoreactive agents. Conditions to Avoid: Powerful sources of ignition & extreme
temps. Materials to Avoid: Strong inorganic & organic acids, oxidizing agents. Hazardous Decomposition Products: Burning generates
X
smoke, airborne soot, hydrocarbons & oxides of carbon & possible metal carbonyls. Residue mainly comprised of soot, metal & mineral oxides.
Acute Toxicity: Not known. Irritancy–Skin: Very mild. Skin Sensitization: Not known. Subacute/Sub-chronic Toxicity: Not known.
Genotoxicity: None known. Chronic Toxicity: None known. California Prop 65: Nickel (carcinogen) Carcinogen: NTP: Suspected
XI
IARC: Yes OSHA: No EC Classification (67/548/EEC): No Allergens: None known. LC-50: Unknown LD-50: N/A
Possible Effects: In extreme cases, may gernerate oil fractions that could act as a marine pollutant. Occurrences of this nature are
XII
highly unlikely. Behavior: Relatively well behaved. Bioaccumulation potential nil.
Environmental Fate: Highly unlikely to cause noteable contamination.
Product Disposal: Do not incinerate. Contact waste disposal company or local authority for advice.
XIII
Container Disposal: Pails without liner–see Product Disposal section above. Pails with plastic liner–pail may only be disposed of via
standard waste disposal services, recycled or reused. Liner–see Product Disposal section above.
XIV
Not classified as hazardous for transport. D.O.T.: Nonhazardous UN No.: Nonhazardous Air Transport (ICAO & IATA): Nonhazard-
ous Sea Transport (IMO & IMDG): Nonhazardous Road & Rail Transport (ADR/RID): Nonhazardous
Labeling Information: None needed EC Annex 1 Classification: Not Applicable. R Phrases: R22—harmful if swallowed.
S Phrases: None applicable, as known. Ozone Depleting Chemicals: Not applicable. TSCA: All components are listed.
XV
WHMIS (Canada): Not controlled. Canadian DSL: All components listed. 40 CFR Part 372 (SARA Section 313): Nickel
SARA 311/312: None CERCLA: Nonhazardous RCRA Hazard Class: Nonhazardous TSCA 12B Components: None
XVI
SDS first issued. SDS data revised. New Jersey Right To Know: See Section II
HMIS SYMBOL
LEGEND
I. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY
HEALTH 1
II. COMPOSITION INFORMATION ON INGREDIENTS
III. HAZARDS IDENTIFICATION FLAMMABILITY 1
IV. FIRST AID MEASURES
Signature: REACTIVITY 0
V. FIRE FIGHTING MEASURES
Prepared by: Donald A. Oldiges PPI
VI. ACCIDENTAL RELEASE MEASURES B
VII. HANDLING AND STORAGE
Date Issued: October 19, 2004
VIII. EXPOSURE CONTROL/PERSONAL PROTECTION
NFPA SYMBOL
IX. PHYSICAL AND CHEMICAL PROPERTIES
As of issue date, the information contained herein is accurate and FIRE
X. STABILITY AND REACTIVITY
reliable to the best of JET-LUBE’S knowledge. JET-LUBE® does
XI. TOXICOLOGICAL INFORMATION
not warrant or guarantee its accuracy or reliability and shall not be 1
XII. ECOLOGICAL INFORMATION
liable for any loss or damage arising out of the use thereof. It is the
1
XIII. WASTE DISPOSAL REACTIVITY
TOXICITY
user’s responsibility to satisfy itself that the information offered for 0
XIV. TRANSPORT INFORMATION
its consideration is suitable for its particular use. B
XV. REGULATORY INFORMATION
XVI. OTHER INFORMATION PERSONAL PROTECTION INDEX
|