Page 1 of 4 ProÂMarkÂ
Issue Date: December 2006 (Supersedes November 2005)Â
MATERIALÂ SAFETYÂ DATAÂ SHEETÂ
___________________________________________________________Â
1. IDENTIFICATIONÂ
Product Name: PROÂMARK BLUEÂ
PROÂMARKÂ PINKÂ
PROÂMARKÂ WHITEÂ
Product Code: PROMÂB, PROMÂP, PROMÂWÂ
Product Use: Liquid foam marker to show where herbicides and pesticidesÂ
have been used.Â
Company Name:Â
GREVILLIAÂ AGÂ PTYÂ LTDÂ (ABNÂ 36Â 083Â 323Â 817)Â
Address 10 Bult Drive Brendale Queensland 4500 Australia.Â
Emergency Tel 24hr 0428 727 300Â
Tel/Fax Tel: (07) 3205 1788 Fax: (07) 3205 4327Â
______________________________________________________________Â
2. HAZARD IDENTIFICATIONÂ
Classified as hazardous under Worksafe Australia criteria.Â
Not classified as dangerous under ACTDG.Â
Risk phrase:  R36/38 Irritating to the eyes and skinÂ
Safety Phrase:  S13 Keep Away from food, drink and animal feed.Â
S2  Keep out of reach of children.Â
S25  Avoid contact with eyes.Â
Poisons Schedule: Not ScheduledÂ
______________________________________________________________Â
3. COMPOSITION & INGREDIENTS:Â
Name CAS ProportionÂ
Surfactants 30Â60%Â
Water balanceÂ
______________________________________________________________Â
4. FIRST AID INFORMATIONÂ
If Swallowed: Rinse mouth and drink plenty of water. DO NOT INDUCEÂ
VOMITING. Seek medical advice.Â
If Eye Contact Occurs: Flush with copious quantities of water with eyelidsÂ
open for at least 15 minutes. Seek medical attention.Â
If Skin Contact Occurs: Immediately wash affected areas thoroughly withÂ
soap and water. Remove contaminated clothing and launder before reÂuse.Â
May cause irritation and defatting of the skin. If irritation occurs, seek medicalÂ
advice.Â
If Inhalation of vapour occurs: Remove affected person to fresh air and seekÂ
medical attention.Â
Advice To Doctor – Treat Symptomatically
Page 2 of 4 ProÂMarkÂ
5. FIRE FIGHTING MEASURES:Â
Classified as Class C2 (Combustible)Â
Extinguishing Media: Water fog, foam, carbon dioxide or dry chemicalÂ
Special Procedures: Wear breathing apparatus & Protective Clothing.Â
Hazardous Decomposition Products: Upon evaporation of the water, theÂ
residue will decompose in a fire giving off toxic carbon monoxide and sulphurÂ
oxides.Â
6. ACCIDENTAL RELEASE MEASURES:Â
Spills –Â? Any spills will be slippery. Avoid secondary accidents and mop upÂ
spills immediately by absorbing onto inert chemical absorbent. SmallÂ
remaining residues should be washed away with water.Â
7. HANDLING & STORAGE:Â
Storage: Store material in original containers in a cool, dry wellÂventilatedÂ
place out of direct sunlight. Keep containers closed at all times. Store awayÂ
from foodstuffs and incompatible materials as per section 10.Â
Handling: Avoid eye contact, direct skin contact and breathing in of sprayÂ
mist.Â
8. EXPOSURE CONTROL AND PERSONAL PROTECTION:Â
Occupational Exposure Limits: No value assigned for this specific material byÂ
the NOCHS; or for its components.Â
Ventilation: ensure adequate ventilation when using this material. KeepÂ
containers closed when not in use.Â
Personal protective clothing: Use gloves and eye/face protection when usingÂ
this material. Use of long sleeves and long pants is strongly recommended.Â
Wash clothing after each work period. Wash hands and face thoroughly whenÂ
leaving work area of before ingestion of food and drink; and before smokingÂ
or using the toilet.Â
9. PHYSICAL AND CHEMICAL PROPERTIES:Â
Appearance:Â liquidÂ
Melting Point:     N/AÂ
Boiling Point: approx 100 deg CÂ
Volatile Component: 75% approximatelyÂ
Specific Gravity: 1.01Â
Flammability limits:   Not flammableÂ
Solubility: soluble in water.Â
10. STABILITYÂ ANDÂ REACTIVITYÂ
Stability & Materials to Avoid: Keep away from sources of ignition and strongÂ
oxidizing agents.Â
Hazardous Polymerization: Will not occur.Â
_____________________________________________________________
Page 3 of 4 ProÂMarkÂ
11. TOXICOLOGICALÂ INFORMATIONÂ
Primary routes for long term exposure to this item are via inhalation or skin orÂ
eye contact. To assist in preventing this type of exposure, please refer toÂ
Exposure Controls above.Â
Acute Affects:Â
Swallowed: Ingestion of large amounts may results in headache, nausea,Â
lethargy, motor weakness and unÂcoordination.Â
Inhalation: Inhalation of large amounts of the mist during spraying operationsÂ
can result in respiratory irritation.Â
Eye Contact: The product may cause eye irritation. Must be washed offÂ
immediately.Â
Skin Contact: Prolonged contact can result in skin defatting, dermatitis and/orÂ
irritation.Â
Chronic Affects:Â
No information available, no chronic affects expected.Â
12. ECOLOGICALÂ INFORMATIONÂ
The material is biodegradable; however, dams, waterways and sewers shouldÂ
not be contaminated with this product.Â
______________________________________________________________Â
13. DISPOSALÂ CONSIDERATIONSÂ
Container Disposal: Do not reÂuse containers for any purpose. Wash outÂ
with large quantities of water (preferably adding to spray tank for use) andÂ
dispose of container in accordance with local regulations.Â
Spills: Collect spilled material on chemical absorbent and dispose of spilledÂ
material and waste in sealable openÂtop type containers for disposalÂ
according to local regulations. Prevent from entering drains, waterways orÂ
sewers.Â
14. TRANSPORTÂ INFORMATIONÂ
Considered nonÂdangerous goods by the Australian Code for Transport byÂ
Road and Rail.Â
UN No: none allocated.Â
DG Class: none allocatedÂ
Hazchem Code: none allocatedÂ
Packing Group: none allocated.Â
15. REGULATORYÂ INFORMATIONÂ
Packaging Labeling: Caution.Â
Keep Out of Reach of Children.Â
Read Safety Directions Before OpeningÂ
AICS Status:  All components are listed on the AICS.Â
Hazard Category: IrritantÂ
Poisons Schedule: Not scheduled.
Page 4 of 4 ProÂMarkÂ
______________________________________________________________Â
16. OTHERÂ INFORMATION:Â
The information in this material safety data sheet refers to the concentratedÂ
material. When diluted as described on the label the acute health effects ofÂ
exposure may be less severe.Â
This material safety data sheet supersedes all previous issues.Â
It is the responsibility of the Purchasers of this product to ensure that allÂ
safety information and environmental information is provided to any peopleÂ
who may use this product.Â
The information contained within this safety data sheet is correct to the bestÂ
of our knowledge and is provided in good faith. Grevillia Ag cannot control theÂ
conditions in which it is used so therefore each user must, prior to usage,Â
assess and control the risks arising from their use of the materialÂ
Contact Normal Hours: Mr. John Lever Phone: (07) 3205 1788Â
After Hours: Mr. John Lever Phone: 0428 727 300Â
�..End of MSDS�.
|