Page 1 of 10
DAK Americas LLC
Material Safety Data She et
MSDS NUMBER: DK0002
REVISION: 01/21/2008
--------------------------------------------------------------------------
POLYESTER FIBER OR PELLET / STAPLE (ALL GRADES)
--------------------------------------------------------------------------
--------------------------------------------------------------------------
CHEMICAL PRODUCT/COMPANY IDENTIFICATION
--------------------------------------------------------------------------
MATERIAL IDENTIFICATION:
Dacron® Polyester Fiber/Staple,
Delcron® Polyester Fiber/Staple,
AirLoft ® Polyester Fiber/Staple,Colorbrite® Polyester Fiber/Staple
Delcron® Hydrotec Polyester Fiber/Staple
SteriPur® AM Polyester Fiber/Staple
SteriPur® FC Polyester Fiber/Staple
HydroPur® Polyester Fiber/Staple
Semi-Dull Polyethylene Terephthalate Polymer/Pellet
C OMPANY IDENTIFICATION:
MANUFACTURER/DISTRIBUTOR:
DAK Americas LLC
5925 Carnegie Blvd, Suite 500
CHARLOT TE, NC, US 28209
PHONE NUMBERS:
Product Information:
Non-Wovens 1-800-237-8275
Wovens 1-800-237-8275
Knits 1-800-237-8275
Transportation Emergency: 1-800-424-9300
Dacron®*** is a registered trademark of DuPont, licensed to DAK Americas LLC.
Delcron®, AirLoft®, Colorbrite®, HydroPur®, & SteriPur® are registered trademarks of DAK
Americas LLC.
Page 2 of 10
DAK Americas LLC
Material Safety Data She et
--------------------------------------------------------------------------
C OMP OSITION/INFORMATION ON INGREDIENTS
--------------------------------------------------------------------------
C OMP ONENTS:
Material CAS Number %
Silver <1*
Titanium Dioxide 13463-67-7 <5
Carbon Black 1333-86-4 0-3
Fiber Lubricant 0.02-3
Polymer-Polyester consisting of:** 89-99.9
Polyethylene Terephthalate** 25038-59-9
Poly(Dimethyl Terephthalate/Ethylene 27937-63-9
Glycol/Sodium 1, 3-Dimethyl 5-sulfoisophthalate)**
Polyethylene Terephthalate/Sodium 9069-94-7
sulfodimethylisophthalate/Polyethylene oxide
terpolymer**
Poly(Diethylene Glycol/Dimethyl 29154-49-2
Terephthalate/Ethylene Glycol)**
Poly(Dimethyl Terephthalate/Ethylene 9037-98-3
Glycol/Polyethylene Glycol)**
* SteriPur® and HydroPur™brands only
**Polyester polymers Fiber contains less than 3% total finish by weight of fiber. Some components or
degradation products may be released under processing conditions. Where there are hazards associated
with these substances, they are recorded in the appropriate section of the MSDS.
--------------------------------------------------------------------------
HAZARDS IDENTIFICATION
--------------------------------------------------------------------------
POTENTIAL HEALTH EFFECTS:
Staple fiber presents low hazards for usual industrial or commercial handling. If a processing step results
in significant airborne fibers, DAK Americas', recommends an airborne exposure limit of 10mg fiber as
particulate/M3 as a 8 hour time weighted average (TWA).
DAK Americas LLC
Material Safety Data She et
This product may contain up to five percent titanium dioxide (TiO2) as a light scattering agent to
impart white color. When incorporated into the fiber, we do not believe TiO2 presents a significant
hazard.
The product is coated with lubricants which have been toxicologically evaluated and found to be
generally of a low order of acute oral and inhalation toxicity in animals and of dermal toxicity in
humans. They do not present a significant health hazard in their normal use. If in processing there is a
potential to generate airborne concentrations of these oils as a mist, we recommend an airborne
exposure limit of 5 mg as particulate/m3 as an 8-hour TWA. If heated to temperatures of 150-250
deg. C during processing, these lubricating oils can degrade and generate off gases which may contain
Page 3 of 10
very small amounts of such chemicals as aldehydes, alcohols, acetic acid, acetone, etc. Local exhaust
ventilation is recommended.
CARCINOGENICITY INFORMATION:
The following components are listed by IARC, NTP, OSHA or ACGIH as carcinogens. A “P� indicates
a proposed carcinogen.
Material IARC NTP OSHA ACGIH
Carbon Black X
--------------------------------------------------------------------------
FIRST AID MEASURES
--------------------------------------------------------------------------
FIRST AID:
INHALATION:
No specific intervention is indicated. Consult a physician if necessary.
SKIN C ONTACT:
The fiber is not likely to be hazardous by skin contact, but cleansing the skin after use is advisable.
EYE CONTACT:
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a
physician.
INGESTION:
No specific intervention is indicated as fiber is not likely to be hazardous by ingestion. Consult a
physician if necessary.
Page 4 of 10
Americas LLC
Material Safety Data She et
--------------------------------------------------------------------------
FIRE FIGHTING MEASURES
--------------------------------------------------------------------------
FLAMMABLE PROPERTIES:
Flash Point: Not applicable. Material will burn in a fire.
FIRE AND EXPLOSION HAZARDS:
None.
Hazardous gases/vapors produced in fire are: aldehydes, ethanol, methanol, acetic acid, acetone, etc.
Combustion products are similar to those of other organic material composed of the same elements.
EXTINGUISHING MEDIA:
Water, Foam, Dry Chemical, CO2
FIRE FIGHTING INSTRUCTIONS:
Evacuate personnel to a safe area. Keep personnel removed and upwind of fire. Wear self-contained
breathing apparatus. Wear full protective equipment.
--------------------------------------------------------------------------
ACCIDENTAL RELEASE MEASURES
--------------------------------------------------------------------------
SAFEGUARDS (PERSONNEL):
NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before
proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up.
SPILL CLEAN UP:
Polyester Staple Fibers present no unusual spill or release potential. Shovel or sweep up for disposal.
Page 5 of 10
DAK Americas LLC
Material Safety Data She et
--------------------------------------------------------------------------
HANDLING AND STORAGE
--------------------------------------------------------------------------
HANDLING (PERSONNEL):
Avoid breathing hot vapors, oil mists, and airborne fibers. Wash thoroughly after handling.
STORAGE:
Store cartons and bales in accord with good material handling practices.
--------------------------------------------------------------------------
EXPOSURE CONTROLS/PERSONAL PROTECTION
--------------------------------------------------------------------------
PERSONAL PROTECTIVE EQUIPMENT:
Generally Applicable Control Measures and Precautions
While no special controls or handling procedures are required, it is recommended that exposure to any
inhalable material be minimized by the use of adequate ventilation, such as local exhaust, effective
containment, and personal cleanliness.
EYE/FACE:
Safety Glasses
# EXPOSURE GUIDELINES:
Applicable Exposure Limits
Titanium Dioxide
PEL (OSHA): 15 mg/m3, total dust, 8 Hr. TWA
TLV (ACGIH): 10 mg/m3, total dust, 8 Hr. TWA, A4
AEL * (DuPont): 10 mg/m3, total dust, 8 Hr. TWA
5 mg/m3, respirable dust, 8 Hr. TWA
Carbon Black
PEL (OSHA): 3.5 mg/m3, 8 Hr. TWA
TLV (ACGIH): 3.5 mg/m3, 8 Hr. TWA, A4
AEL * (DuPont): 0.5 mg/m3, 8 & 12 Hr. TWA,
(Polynuclear Aromatic Hydrocarbon tent <0.1%)
Includes Channel, Lamp, and Thermal Black
DAK Americas LLC
Material Safety Data She et
Polyethylene Terephthalate
PEL (OSHA): None Established
TLV (ACGIH): None Established
AEL * (DuPont): 10 mg/m3, 8 Hr. TWA, total dust
5 mg/m3, 8 Hr. TWA, respirable dust
Page 6 of 10
DAK Americas supports AEL’s defined by E.I. DuPont as Acceptable Exposure Limits. Where
�
governmentally imposed occupational exposure limits which are lower than the AEL are in effect,
such limits shall take precedence.
--------------------------------------------------------------------------
PHYSICAL AND CHEMICAL PROPERTIES
--------------------------------------------------------------------------
PHYSICAL DATA:
Melting Point: 250 to 300 deg. C
Water Solubility: Insoluble
Form: Fiber or pellet
Color: Clear and colorless, white if product contains TiO2, black if product contains
carbon black.
Odor: Odorless
% Volatiles: 3%. Only the finish will volatilize below the melting point.
--------------------------------------------------------------------------
STABILITY AND REACTIVITY
--------------------------------------------------------------------------
CHEMICAL STABILITY:
Stable.
INC OMPATIBILITY WITH OTHER MATERIALS:
None reasonably foreseeable.
DECOMPOSITION:
DECOMPOSES WITH HEAT:
If heated to 150-250 deg. C during processing, the fiber lubricants can degrade and generate off gases
which may contains small amounts of chemicals such as aldehydes, alcohols, acetic acid, acetone, etc.
We are not aware of chemicals such as these reaching concentrations that present a serious health
hazards. However, information on toxic effects and recommended exposure limits of these and other
chemicals can be found in the most recent edition of the ACGIH documentation of threshold limit
values.
DAK Americas LLC
Material Safety Data She et
When Polyester Staple Fiber is burned, no unusual combustion gases have been observed, and its
combustion products are similar to those of other organic materials composed of the same elements.
--------------------------------------------------------------------------
DISPOSAL C ONSIDERATIONS
--------------------------------------------------------------------------
WASTE DISPOSAL:
Page 7 of 10
Polyester fiber is essentially non-biodegradable, but most of the fiber finishes are biodegradable. It
contains no significant percentage of materials extractable by contact with ambient waters. It is stable
in all recommended use environments and requires no special spill handling procedure.
Polyester fiber may be disposed of by incineration, preferably by recovering the energy for other uses.
The fiber produces offgases during incineration which are similar to those produced by the incineration
of other natural and man-made fibers, with negligible Nox. Polyester Staple Fibers made from Polymers
containing low levels of sulfur may produce SOx when incinerated. A non-hazardous ash which passes
the Toxic Chemical Leachate Procedure should be produced. Further information on incineration is
available upon request.
Polyester Staple Fiber is not a hazardous waste as defined by regulation implementing the Resource
Conservation and Recovery Act (RCRA).
Polyester Staple Fibers and fabrics are not regulated on hazardous wastes under the Comprehensive
Environmental Response, Compensation and Liability Act (CERCLA) and are not subject to the
Superfund tax.
Treatment, storage, transportation and disposal must be in accordance with applicable Federal,
State/Provincial, and Local regulations.
Page 8 of 10
DAK Americas LLC
Material Safety Data She et
--------------------------------------------------------------------------
REGULATORY INFORMATION
--------------------------------------------------------------------------
U.S. FEDERAL REGULATIONS:
TOXIC SUBSTANCE CONTROL ACT (TSCA):
Polyester Staple Fiber is considered an "article" under provision of TSCA. All non-exempt chemical
substances incorporated into the product or applied to the surface are included in the TSCA Inventory
of Chemical Substances compiled by the U.S. Environmental Protection Agency (EPA).
O C CUPATIONAL SAFETY AND HEALTH ACT (OSHA):
This product is not a "hazardous chemical" as regulated under the OSHA Hazard Communication
Standard (29 CFR 1910.1200). This data sheet is provided merely as an informational resource for our
customers.
Emergency Planning and Community Right-To-Know Act of 1986 (EPCRA):
Polyester Staple Fiber contains no chemicals in concentrations reportable under Section 313 of EPCRA.
STATE REGULATIONS (U.S.):
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): Polyester Staple
Fiber contains none of the substances known to the State of California to cause cancer or reproductive
toxicity.
PENNSYLVANIA AND NEW JERSEY RIGHT-TO-KNO W LAWS:
Polyester Staple Fiber contains may contain carbon black and titanium dioxide, which are listed on both
the New Jersey and Pennsylvania Right-To-Know regulatory lists.
Page 9 of 10
DAK Americas LLC
Material Safety Data She et
--------------------------------------------------------------------------
OTHER INFORMATION
--------------------------------------------------------------------------
CLEAN AIR ACT AMENDMENTS OF 1990:
Polyester Staple Fiber contains none of the ozone depleting substances listed in either Class I
(chlorofluorocarbons, halon, carbon tetrachloride and methyl chloroform) or Class II
(hydrochlrofluorocarbons) of the Clean Air Act Amendments of 1990.
--------------------------------------------------------------------------
ADDITIONAL INFORMATION
--------------------------------------------------------------------------
Dacron®*** is a registered trademark of DuPont, licensed to DAK Americas LLC.
The data in this Material Safety Data Sheet relates only to the specific material designated herein and
does not relate to use in combination with any other material or in any process.
Responsible for MSDS: Cape Fear Site MSDS Coordinator
Address: 3500 Daniels Rd.
Leland, NC 28451
Telephone: 1-910-371-4000
Se e DAK Americas Caution Statem ent on next page.
End of MSDS
-------------------------------------------------------------------------
CAUTION
--------------------------------------------------------------------------
DAK Americas LLC Caution Bulletin No. 1
Page 10 of 10
DO NOT USE DAK AMERICAS MATERIALS IN MEDICAL APPLICATIONS INVOLVING
PERMANENT, BRIEF, OR TEMPORARY IMPLANTATION IN THE HUMAN BODY OR
PERMANENT CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES, UNLESS THE
MATERIAL HAS BEEN PROVIDED DIRECTLY FROM DAK AMERICAS UNDER A CONTRACT
WHICH EXPRESSLY ACKNOWLEDGES THE CONTEMPLATED USE.
DAK AMERICAS MAKES NO REPRESENTATION, PROMISE, EXPRESS WARRANTY OR
IMPLIED WARRANTY CONCERNING THE SUITABILITY OF THESE MATERIALS FOR USE IN
THE HUMAN BODY OR IN CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES.
THE CONTENT OF DAK AMERICAS MATERIAL IS NOT CERTIFIED FOR IMPLANTS. DAK
Americas materials are not designed or manufactured for use in implantation in the human body or in
contact with internal body fluids or tissues. DAK Americas has not performed clinical testing of these
materials for implantation. DAK Americas will not provide to customers making implantable devices
any notice concerning its materials, as specified under 21 C.F.R section 820.81, or any other
information necessary for medical device use of the materials under any other statue or FDA regulation.
DAK Americas has neither sought, nor received, approval from the FDA for the use of these materials
in implantation in the human body or in contact with internal body fluids or tissues.
ALL IMPLANTABLE MEDICAL DEVICES CARRY A RISK OF FAILURE AND ADVERSE
C ONSEQUENCES
The medical judgment of a physician, a medical device seller and the FDA should be relied upon for
identification of both harmful consequences and life-saving benefits from an implantation device
comprised of specific materials. These benefits and risks can be found in published medical cases
performing clinical medical studies of an implantable medical device. DAK Americas does not support
the use of its products in these applications and cannot weigh the benefits against the risk defined in
these articles. DAK Americas can not offer a medical judgment on the safety or efficacy of the use of
its materials in such devices.
DO NOT MAKE REFERENCE TO THE DAK AMERICAS NAME OR ANY DAK AMERICAS
TRADEMARK IN ASS O CIATION WITH AN IMPLANTABLE MEDICAL DEVICE.
Do not use a DAK Americas trademark or licensed trademark as the descriptive name of an implantable
medical device (e.g. do not call it the "Dacron®" prosthesis", do not call it a "Delcron®" prosthesis, or
do not call it a " Laser+® device" ).
End of Bulletin
|