Material Safety Data Sheet
Infosafe No: 3CM04 Issue Date: March 2006 ISSUED by COLORMAK
Product Name: Permaset Aqua Supercover White
Not classified as hazardous
Page 1 of 3
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY
Chemical Product Aqueous polymer dispersion with pigment and propriety additives
And Company
Identification
Product Name Permaset Aqua Supercover White
Product Code 0041
Product Use Textile printing on natural fibres & synthetic substrates.
Company Name Colormaker Industries
Address 44 Orchard Road Brookvale
NSW 2100 Australia
Telephone Tel: (02) 9939-7977 Fax: (02) 9939-6685
Number/Fax
Product Type Aqueous textile printing media.
Emergency Contact Phil Reynolds
Name
Emergency Contact 44 Orchard Rd., Brookvale NSW 2100 Australia
Address
24 hour Contact +61 411 888 260
2. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Aqueous polymer dispersion with specialty additives.
Characterization
Ingredients Name CAS Proportion Haz Symbol Risk Phrase
Acrylic copolymer N/A 50-80 %
Titanium Dioxide N/A 15-30 %
Water and minor N/A 1-5 %
ingredients
Diethylene glycol 111-46-6 1-4 % Xn R22
3. HAZARDS IDENTIFICATION
Harmful if swallowed.
4. FIRST AID MEASURES
Inhalation Not an inhalation risk.
Ingestion Immediately rinse mouth and then drink plenty of water. Seek
medical attention.
Skin
Instantly wash with soap and water and rinse thoroughly. Remove
contaminated clothing and wash before re-use. If irritation occurs
seek medical advice.
Eye Immediately irrigate with copious quantity of water for at least
15 minutes. Eyelids to be held open. In all cases of eye
contamination it is a sensible precaution to seek medical advice.
Advice to Doctor Treat symptomatically.
5. FIRE FIGHTING MEASURES
Extinguishing Use extinguishing media suited to the primary source of the fire.
Media
Specific Hazards No known unusual fire or explosion hazards associated with the
product.
Material Safety Data Sheet
Infosafe No: 3CM04 Issue Date: March 2006 ISSUED by COLORMAK
Product Name: Permaset Aqua Supercover White
Not classified as hazardous
Page 2 of 3
Hazardous Not flammable, however after evaporation of the aqueous component
Combustion residual material may decompose evolving toxic fumes and gases.
Products
Emergency Fire fighters to wear self contained breathing apparatus if risk
Action in of exposure to products of combustion
Case of Fire
6. ACCIDENTAL RELEASE MEASURES
Spills/Disposal Slippery when spilt. Avoid accidents, clean up immediately.
Contain using sand and earth 鈥? prevent runoff into drains and
waterways. Wear protective equipment to prevent skinand eye
contamination.Contain - prevent contamination of drains and
waterways. Use absorbent (soil, sand, sawdust, vermiculite).
Collect and seal in properly labelled drums for disposal. Wash
area with excess water.
7. HANDLING AND STORAGE
Handling Handle in accordance with good industrial hygiene and safety
practice.
Store in a cool, dry place (above 0掳C and below 40掳C) out of
direct sunlight and away from sources of heat.
Storage
8. EXPOSURE CONTROLS, PERSONAL PROTECTION
Other exposure Information.
A Time Weighted Average(TWA) or a Short Term Exposure Limit (STEL)
has not been established by the National Occupational Health and
Safety Commission for this product or any of its major ingredients.
Respiratory Not generally required.
Protection
Eye Protection Safety glasses
Hand Protection PVC, neoprene or nitrile rubber gloves.
Body Protection Overalls or similar protective apparel.
Hygiene Measures Wash hands and face before smoking, eating, drinking or using the
toilet.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance White opaque liquid.
Odour Mild, characteristic.
Boiling Point Approx. 100掳C (water)
Solubility in Water Miscible.
Specific Gravity Approx. 1.35 (20掳C)
(H2O=1)
pH Value Approx. 9 (25掳C)
Viscosity Approx 70,000 cP
Flash Point Not applicable
Flammability Not flammable.
10. STABILITY AND REACTIVITY
Stability Stable.
Hazardous Will not occur.
Polymerization
Material Safety Data Sheet
Infosafe No: 3CM04 Issue Date: March 2006 ISSUED by COLORMAK
Product Name: Permaset Aqua Supercover White
Not classified as hazardous
Page 3 of 3
Hazardous No decomposition if used correctly.
Decomposition
Products
11. TOXICOLOGICAL INFORMATION
Inhalation Vapour or spray mist may irritate mucous membranes and respiratory
tract
Ingestion Ingestion may cause gastric upset, pain, diarrhea, lethargy.
Skin Prolonged and/or repeated skin contact may result in irritation.
Eye Eye contact may result in slight irritation.
12. ECOLOGICAL INFORMATION
No data.
Envir. Prevent(undiluted)product reaching ground water, water bodies or
Protection sewage system.
13. DISPOSAL CONSIDERATIONS
Waste Disposal Comply with local, state and federal regulations.
14. TRANSPORT INFORMATION
U.N. Number None Allocated
Sub Risk Non hazardous material
DG Class None Allocated
UN Number (Sea Transport)
None Allocated
Hazchem Code None Allocated
Packing Group None Allocated
15. REGULATORY INFORMATION
Poisons Schedule Not Scheduled
AICS (Australia) All components listed.
16. OTHER INFORMATION
Last Change
This MSDS revision to meet requirements of 'National Code of
Practice for the Preparation of Material Safety Data Sheets 3rd
Edition [NOHSC:2011(2005)]'
Uses and Restrictions
This MSDS summarises at the date of issue our best knowledge of
the health and safety information of the product, and in
particular how to safely handle and use the product in the
workplace. Since Colormaker Industries cannot anticipate or
control the conditions under which the product may be used, each
user must, prior to usage, review this MSDS in the context of how
the user intends to handle and use the product in the workplace.
If clarification or further information is needed to ensure that
appropriate assessment can be made, the user should contact this
company. Our responsibility for product as sold is subject to our
standard terms and conditions, a copy of which is available on
request.
Technical Contact Phil Reynolds ph:+61 2 9939-7977 fax:+61 2 9939 6685
Point
...End Of MSDS..
|