Page 1/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
1 Identification of substance
?Product details
?Trade name: Thin Finish
?Article number: 83-305632
?Application of the substance / the preparation
?Manufacturer/Supplier:
Conspec
4226 Kansas Avenue Tel.: (877) 266-7732
Kansas City, KS 66106
Emergency Telephone Number: Use only in the event of an emergency involving a spill, leak, fire, exposure, or accident
involving chemicals. Within the U.S., Canada, or the U.S. Virgin Islands, call ChemTrec at (800) 424-9300, 24 hours a day.
Or, outside these areas, call (703) 527-3887. Collect calls are accepted.
?Information department: Environmental, Health, and Safety department.
2 Composition/Data on components
?Chemical characterization
?Description: Mixture of the substances listed below with nonhazardous additions.
?Dangerous components:
1317-65-3 Limestone 10-25%
5%
69012-64-2 Silica-Amorphous Silica fume
?Additional information: For the wording of the listed risk phrases refer to section 16.
3 Hazards identification
?Hazard description: Not applicable.
?Information pertaining to particular dangers for man and environment:
The product does not have to be labelled due to the calculation procedure of the "General Classification guideline for
preparations of the EU" in the latest valid version.
?Classification system:
The classification was made according to the latest editions of international substances lists, and expanded upon from
company and literature data.
?NFPA ratings (scale 0 - 4)
Health = 0
0 Fire = 0
0 0 Reactivity = 0
?HMIS-ratings (scale 0 - 4)
HEALTH 0 Health = 0
Fire = 0
FIRE 0
Reactivity = 0
PHYSICAL HAZARD 0
4 First aid measures
?General information: No special measures required.
?After inhalation: Supply fresh air; consult doctor in case of complaints.
?After skin contact: If skin irritation continues, consult a doctor.
?After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
(Contd. on page 2)
USA
DR
Page 2/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
Trade name: Thin Finish
(Contd. of page 1)
?After swallowing: If symptoms persist consult doctor.
5 Fire fighting measures
?Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
6 Accidental release measures
?Person-related safety precautions: Not required.
?Measures for environmental protection: No special measures required.
?Measures for cleaning/collecting: Pick up mechanically.
?Additional information: No dangerous substances are released.
7 Handling and storage
?Handling:
?Information for safe handling:
Wear appropriate personal protective clothing to prevent eye and skin contact. Avoid breathing vapors or mists of this
product. Use with adequate ventilation. Do not take internally.
?Information about protection against explosions and fires: No special measures required.
?Storage:
?Requirements to be met by storerooms and receptacles: No special requirements.
?Information about storage in one common storage facility: Not required.
?Further information about storage conditions: None.
8 Exposure controls and personal protection
?Additional information about design of technical systems: No further data; see item 7.
?Components with limit values that require monitoring at the workplace:
1317-65-3 Limestone
PEL 15*; 5** mg/m?br>
*Total dust **Respirable fraction
REL 10*; 5** mg/m?br>
*Total dust **Respirable fraction
TLV 10 mg/m?br>
(e)
69012-64-2 Silica-Amorphous Silica fume
TLV 2 R mg/m?br>
?Additional information: The lists that were valid during the creation were used as basis.
?Personal protective equipment:
?General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.
?Breathing equipment: Not required.
?Protection of hands:
Protective gloves
(Contd. on page 3)
USA
DR
Page 3/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
Trade name: Thin Finish
(Contd. of page 2)
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
?Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from
manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can
not be calculated in advance and has therefore to be checked prior to the application.
?Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
?Eye protection: Wear appropriate eye protection to prevent eye contact.
9 Physical and chemical properties
?General Information
Solid
Form:
According to product specification
Color:
Characteristic
Odor:
?Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
Not applicable.
?Flash point:
Product is not selfigniting.
?Auto igniting:
Product does not present an explosion hazard.
?Danger of explosion:
2.499 g/cm?br>
?Density at 20癈 (68癋):
?Solubility in / Miscibility with
Soluble.
Water:
?Solvent content:
0.0 %
Organic solvents:
0.1 %
Water:
99.7 %
?Solids content:
?Volatile Organic Compounds: Not determined
10 Stability and reactivity
?Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
?Dangerous reactions No dangerous reactions known.
?Dangerous products of decomposition: No dangerous decomposition products known.
11 Toxicological information
?Acute toxicity:
?Primary irritant effect:
?on the skin: No irritant effect.
?on the eye: No irritating effect.
?Sensitization: No sensitizing effects known.
?Additional toxicological information:
The product is not subject to classification according to internally approved calculation methods for preparations:
(Contd. on page 4)
USA
DR
Page 4/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
Trade name: Thin Finish
(Contd. of page 3)
When used and handled according to specifications, the product does not have any harmful effects according to our
experience and the information provided to us.
12 Ecological information
?General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water
13 Disposal considerations
?Product:
?Recommendation:
Smaller quantities can be disposed of with household waste.
It is the generator's responsibility to determine if the waste meets applicable definitions of hazardous waste. State and local
regulations may differ from federal disposal regulations. Dispose of waste material according to local, state, federal, and
provincial environmental regulations.
?Uncleaned packagings:
?Recommendation: Disposal must be made according to Federal, State, and Local regulations.
?Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
Not Regulated
?DOT regulations:
N/A
?Hazard class:
No Limited Quantity exemption applies for this shipping class.
?Limited Quantity Exemption:
Same as listed for Standard Shipments above.
?U.S. Domestic Ground Shipments:
?U.S. Domestic Ground Non-Bulk (119 gal or less per
Same as listed for Standard Shipments above.
container) Shipments:
Not determine
?Emergency Response Guide (ERG) Number:
Not Regulated
?Land transport ADR/RID (cross-border):
N/A
?ADR/RID class:
Not Regulated
?Maritime transport IMDG:
N/A
?IMDG Class:
No
?Marine pollutant:
Not Regulated
?Air transport ICAO-TI and IATA-DGR:
N/A
?ICAO/IATA Class:
15 Regulations
?Sara
?Section 355 (extremely hazardous substances):
50-00-0 formaldehyde
?Section 313 (Specific toxic chemical listings):
This product may contain 1 or more toxic chemicals subject to the reporting requirements of Section 313 of Title III of the
Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40 CFR part 372. If so, the chemicals are listed below.
1%
554-13-2 lithium carbonate
0.01%
75-07-0 acetaldehyde
0.01%
50-00-0 formaldehyde
(Contd. on page 5)
USA
DR
Page 5/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
Trade name: Thin Finish
(Contd. of page 4)
?TSCA (Toxic Substances Control Act):
All ingredients are listed.
?Proposition 65
?Chemicals known to the State of California (Prop. 65) to cause cancer:
14808-60-7 Quartz (SiO2)
75-07-0 acetaldehyde
50-00-0 formaldehyde
?Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
?Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
?Chemicals known to cause developmental toxicity:
554-13-2 lithium carbonate
?Cancerogenity categories
?EPA (Environmental Protection Agency)
75-07-0 acetaldehyde B2
?IARC (International Agency for Research on Cancer)
69012-64-2 Silica-Amorphous Silica fume 3
14808-60-7 Quartz (SiO2) 1
75-07-0 acetaldehyde 2B
50-00-0 formaldehyde 2A
?NTP (National Toxicology Program)
14808-60-7 Quartz (SiO2) K
75-07-0 acetaldehyde R
50-00-0 formaldehyde R
?TLV (Threshold Limit Value established by ACGIH)
1344-95-2 Silicic acid, calcium salt A4
14808-60-7 Quartz (SiO2) A2
75-07-0 acetaldehyde A3
?MAK (German Maximum Workplace Concentration)
14808-60-7 Quartz (SiO2) 1
75-07-0 acetaldehyde 3
?NIOSH-Ca (National Institute for Occupational Safety and Health)
14808-60-7 Quartz (SiO2)
75-07-0 acetaldehyde
?OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
?Product related hazard informations:
Observe the general safety regulations when handling chemicals.
The product is not subject to identification regulations according to directives on hazardous materials.
?National regulations:
?Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
USA
(Contd. on page 6)
DR
Page 6/6
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 12/28/2007 Reviewed on 12/28/2007
Trade name: Thin Finish
(Contd. of page 5)
16 Other information
The provided information is based on our present knowledge. However, this shall not constitute a guarantee for any specific
product features and shall not establish a legally valid contractual relationship.
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product
features and shall not establish a legally valid contractual relationship.
?Department issuing MSDS: Environmental, Health & Safety Department
?Contact: Environmental, Health & Safety Manager
USA