MATERIAL SAFETY DATA SHEET
Manufactured by: Telephone: (815)455-4700
Product Info (815)455-4700
Sage Products Inc.
3909 Three Oaks Road Tech Info (815)455-4700
Cary, IL 60013 Emergency (800)424-9300
(Chemtrec)
1 PRODUCT IDENTIFICATION
2% Chlorhexidine gluconate* Cloth
Product Name:
* Equivalent to 500 mg Chlorhexidine gluconate per cloth
9000, 9001, 9000-S, 9000-PS, 9601-X, 9602-X, 9605, 9606, 9607-D,
Product Number:
9705, 9705-S, 9706, 9707, 9707-S
R98426, R98426-C
Sage Item Number:
Topical Antimicrobial Cloth
Product Type:
N/A
Chemical Family:
Health 1
Chemical Hazard Rating:
Flammability 0
Reactivity 0
2 HAZARDOUS INGREDIENTS
THE HAZARD COMMUNICATION STANDARD REQUIRES THAT SUCH MIXTURES BE ASSUMED TO
PRESENT THE SAME HEALTH HAZARD AS DO COMPONENTS THAT CONSTITUTE AT LEAST 1% OF THE
MIXTURE (0.1% FOR CARCINOGENS), ALTHOUGH OSHA HAS NOTED THAT THE HAZARDS OF
INDIVIDUAL COMPONENTS MAY BE ALTERED BY INCLUDING THEM IN A MIXTURE.
Ingredient CAS Registry No. PEL/TLV % Range
2
Chlorhexidine gluconate 18472-51-0 Not established
Propylene glycol 57-55-6 Not established <5
Glycerin 56-81-5 Not established <5
Polyester Fiber 25038-59-9 N/A N/A
SOME OF THE INGREDIENTS IN THIS MIXTURE ARE TRADE SECRETS (TS).
NONE OF THE COMPONENTS OF THIS PRODUCT IS SUBJECT TO THE REPORTING REQUIREMENTS OF
SECTION 313 OF TITLE III OF SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986
AND 40 CFR PART 372.
N/A = Not Applicable
Sage MSDS 131 1
3 PHYSICAL DATA
N/A N/A
Boiling Point: Specific Gravity:
N/A N/A
Vapor Pressure: Vapor Density (Air = 1):
N/A > 212 篎
Freezing Point: Flash Point:
Not Known None
Auto-ignition Temp: Lower Explosive Limit:
N/A None
Solubility in Water: Upper Explosive Limit:
White polyester cloth with mild odor
Appearance & Odor:
4 FIRE AND EXPLOSION HAZARD DATA
FLASH POINT METHOD:
Non-Flammable
Estimated Flammable Limits in Air:
Foam or water
Extinguishing Media Includes:
Use a self-contained breathing apparatus in
Special Fire Fighting Procedures:
close proximity to fire.
Treat as a solid that burns with low smoke
Unusual Fire & Explosion Hazards:
density
5 REACTIVITY DATA
STABILITY: STABLE
Will not occur.
Hazardous Polymerization:
None known
Incompatibilities:
CO, CO2
Decomposition Products May Include:
Sage MSDS 131 2
6 HEALTH HAZARD DATA
IMMEDIATE HEALTH HAZARD DATA:
Not likely. Product does not absorb well through skin.
Skin Absorption:
Not likely. Considered non-toxic.
Ingestion:
If cloth is swallowed seek medical attention.
Not considered an inhalation hazard.
Inhalation:
Not expected to present a skin hazard under anticipated conditions
Skin:
of normal use. If irritation occurs, discontinue use.
Hazardous to middle ear, with perforated eardrum. Seek medical
Ear:
attention.
Keep out of eyes. If contact occurs rinse promptly and thoroughly
Eyes:
with water and seek medical attention.
EMERGENCY FIRST AID PROCEDURES:
N/A
Ingestion (swallowing):
N/A
Inhalation (breathing):
Flush with water, if irritation persists, get medical
Skin Contact:
attention.
Flush with water for fifteen minutes, get medical
Eye Contact:
attention.
7 SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED.
Wipe dry any surfaces.
Procedures:
Place in appropriate container and dispose of with all
Waste Disposal Method:
federal, state and local ordinances.
8 SPECIAL HANDLING/PROTECTION INFORMATION
N/A
Inhalation:
If handling for long periods, wear protective gloves. Wash after
Skin:
handling product.
Keep out of eyes. If product contacts eye(s), flush with plenty
Eyes:
of water, if irritation persists, seek medical attention.
Store at room temperature.
Storing:
Sage MSDS 131 3
9 SPECIAL PRECAUTIONS
Domestic North America (800) 424-9300
For Chemical Emergency
International, Call (703) 527-3887 (Collect Calls
Spill, Leak, Fire, Exposure,
Accepted)
or Accident
Call CHEMTREC Day or Night
10 PREPARATION OF MSDS
Prepared by Safety Department on: 7/6/05
This data was prepared from current, reliable sources, however, Sage Products Inc.
makes no warranty regarding its accuracy. Because of conditions beyond our control, it
is the user's responsibility to determine safe conditions for usage.
Date Issued: 7/8/05 Revisions: 12/15/08
Sage MSDS 131 4
|