Pg 1 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
1. PRODUCT AND COMPANY INDENTIFICATION
Company 24 Hour Emergency Response Information
Southern Metal & Plastic Products CHEM - TEL: 1- 800-255-3924
3400 Treecourt Industrial Blvd
St. Louis, MO 63122
Item CAS Number Content(WT/WT%) Chemical Name
01 1317-65-3 <43.0 CALCIUM CARBONATE
02 14807-96-6 <8.3 TALC
03 9004-34-6 <1.8 FIBER
EXPOSURE LIMITS
ACGIH OSHA COMPANY
Item TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
01 N.E. N.E. N.E. N.E. N.E. NO
02 2 mg/m3 N.E. 2mg/m3 N.E N.E. NO
03 5mg/m3 N.E. N.E. N.E N.E. NO
3. HAZARDS IDENTIFICATION
Emergency Overview
No Information
Potential Health Effects
Effects of Overexposure:
Eye Contact: No information
Skin Contact: No information
Inhalation: No information
Ingestion: No information
Chronic Hazards: No information
Pg 2 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
Primary Route(s) of entry:
Skin Contact, Inhalation, Ingestion, eye contact
4. FIRST AID MEASURES
General Advice:
No Information
If Inhaled:
No information
If on skin:
Wash with soap and water. Get medical attention if irritation develops or persists.
If in eyes:
Immediately flush eyes with plenty of water. Get medical attention, if irritation persist.
Suitable extinguishable media:
Alcohol Foam, CO2, Dry Chemical, Foam, Water Fog
Unusual Fire and Explosion Hazards:
No information
Special Firefighting Procedures:
As in any fire, wear self- contained breathing apparatus pressure- demand (MSHA/NIOSH approved ro
equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Cleanup:
No information
7. HANDLING AND STORAGE
Handling
Wash thoroughly after handling.
Storage
Pg 3 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
No information.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Advice on system design
No information
Personal Protective Equipment
Respiratory protection:
No information
Skin protection:
No information
Eye protection:
Wear safety glasses with side shields (or goggles) and a face shield.
Other protective equipment:
No information
General safety and hygiene measures:
Wash hands before eating.
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: Solid Vapor Density: Is heavier than air
Odor: none Odor Threshold: NA
Color: Black, tacky Evaporation Rate: Is slower than Ether
Boiling Range: N.A. Specific Gravity: 1.4670
Solubility in H2O: None pH @ 0.0 %:
Freeze Point: NA Viscosity: NA
Vapor Pressure: NA
Physical State: Solid
Coefficient of water/oil distribution: N.A.
Hazardous Polymerization:
Will not occur under normal conditions.
Pg 4 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
Stability:
This product is stable under normal storage conditions.
11. TOXICOLOGICAL INFORMATION
No product or component toxicological information is available.
DOT HAZARD CLASS: Non - Hazardous HAZARD SUBCLASS:
DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE:
15. REGULATORY INFORMATION
The following Components are not subject to reporting in Section 2:
CHEMICAL CAS NUMBER WT/WT %
CLAY 1302-78-9 18.4
POLYBUTENE 9003-29-6 18.2
BUTYL RUBBER 9010-85-9 4.3
BUTYL RUBBER 9010-85-9 2.2
WATER 7732-18-5 1.8
MAGNESIUM CARBONATE 546-93-0 0.7
TACKIFIER 62258-49-5 0.6
CARBON BLACK 1333-86-4 0.4
SAP 0.4
ANTI-OXIDANT 6683-19-8 0.1
Federal Regulations
Hazardous by definition of Hazard Communication Standard (29 CFR
OSHA:
1910.1200)
Pg 5 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
CERCLA- SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA `Hazard
Categories' promulgated under Sections 311 and 312 of the Super
fund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:
IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting requirements of
Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986
and 40 CFR Part 372:
CHEMICAL NAME CAS NUMBER WT/WT %
No SARA Section 313 components exist in this product.
Toxic Substances Control Act:
This product contains the following chemical substances subject to the reporting requirements of
TSCA 12 (B) if exported from the United States:
CHEMICAL NAME CAS NUMBER
No Information is available.
U.S. State Regulations:
New Jersey Right-to-Know:
The following materials are non- hazardous, but are among the top five components in this
Product.
CHEMICAL NAME CAS NUMBER
CLAY 1302-78-9
POLYBUTENE 9003-29-6
BUTYL RUBBER 9010-85-9
Pennsylvania Right-to-Know:
The following non- hazardous ingredients are present in the product at greater than 3%:
CHEMICAL NAME CAS NUMBER
CLAY 1302-78-9
POLYBUTENE 9003-29-6
BUTYL RUBBER 9010-85-9
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are known to the state of
California to cause cancer, birth defects or other reproductive harm:
CHEMICAL NAME CAS NUMBER
No Proposition 65 chemicals exist in this product.
Pg 6 of 6
Southern Metal & Plastic Products
MATERIAL SAFETY DATA SHEET
PRODUCT or CHEMICAL NAME
Last Update: 27 June 2007
METAL & PLASTIC PRODUCTS
INTERNATIONAL REGULATIONS:
CANADIAN WHMIS: This MSDS has been prepared in compliance with controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: No information available.