MATERIAL SAFETY DATA SHEET
I. PRODUCT IDENTIFICATION
Static Dissipative
Name: Armstrong Static Dissipative Sheet Vinyl & Tile
Description: Vinyl Flooring
Sheet Vinyl & Tile
II. DEPARTMENT OF TRANSPORTATION INFORMATION
Shipping name: Not Classified Hazard Class: N/A ID #: N/A Prepared 6/06
EMERGENCY ONLY CONTACT: CHEM-TEL -1-800-255-3924
III. HMIS (0=minimal hazard; 4 = severe hazard) Armstrong World Industries, Inc.
P. O. Box 3001
Health = 0 Flammability = 1 Reactivity = 0
Lancaster, PA 17604
IV. PRODUCT CONTENT
www.armstrong.com
This product does not contain chemicals subject to the reporting
MSDS: www.floorexpert.com
requirements of Section 313 of SARA Title III and 40 CFR 372. All
Technical Services:
components are on TSCA inventory. This product does NOT contain
1-877-276-7876, Option 2,3,3
asbestos.
V. HAZARDOUS INGREDIENT
(Chemical Identity; Common Name) C.A.S. No. % OSHA PEL ACGIH TLV
None N/A N/A N/A N/A
DESCRIPTION AND INGREDIENT INFORMATION
These vinyl flooring products are produced for residential and commercial (architectural) marketplace use. They come in a wide variety of
aesthetic designs, styles, colors, surface finishes, and sizes.
MISCELLANEOUS INFORMATION
Each of these products is classified as an "article" according to Title 29 of the Code of Federal Regulations, OSHA Part 1910.1200(c).
They are formed to a specific shape or design during manufacture, have end use functions dependent upon their shape or design, and do
not release any hazardous chemical under normal conditions of use.
VI. PHYSICAL DATA XI. SPECIAL HANDLING AND USE INFORMATION
APPEARANCE: Material dependent. BOILING POINT (degrees VENTILATION: N/A. RESPIRATORY PROTECTION: N/A. SKIN
F): N/A. VAPOR PRESSURE (mm Hg @ 20 degrees C): N/A. AND EYE PROTECTION: N/A.
VAPOR DENSITY (Air = 1): N/A. PERCENT VOLATILE BY XII. SPECIAL PRECAUTIONS
WEIGHT (30 min. @ 275 degrees F): N/A. EVAPORATION RATE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE:
(Butyl Acetate = 1): N/A. SOLUBILITY IN WATER: N/A. N/A. OTHER PRECAUTIONS: N/A.
SPECIFIC GRAVITY (H20 = 1): N/A. pH: N/A.
XIII. WARNING
VII. FIRE AND EXPLOSION HAZARD DATA
FOR PREVIOUSLY INSTALLED FLOOR COVERING
FLASH POINT: N/A. FLAMMABLE RANGE: LEL = N/A; UEL = DO NOT SAND, DRY SCRAPE, BEADBLAST, OR
N/A. EXTINGUISHING MEDIA: Water. SPECIAL FIRE MECHANICALLY PULVERIZE EXISTING RESILIENT
FIGHTING PROCEDURES: Protect fire fighters from toxic FLOORING, BACKING OR LINING FELT. THESE PRODUCTS
products of combustion by wearing self-contained breathing MAY CONTAIN EITHER ASBESTOS FIBERS OR
apparatus. UNUSUAL FIRE AND EXPLOSION HAZARDS: None. CRYSTALLINE SILICA. POSSIBLE CANCER AND
VIII. HEALTH HAZARD DATA RESPIRATORY TRACT HAZARD BY INHALATION. AVOID
CREATING DUST. SMOKING BY INDIVIDUALS WHO HAVE
PRIMARY ROUTE(S) OF ENTRY: N/A. TARGET ORGANS: N/A.
BEEN EXPOSED TO ASBESTOS FIBERS GREATLY
EFFECTS OF OVEREXPOSURE: N/A. SKIN AND EYES: N/A.
INCREASES THE RISK OF SERIOUS BODILY HARM. RFCI'S
INHALATION: N/A. CARCINOGENICITY: NTP: No; IARC
(Resilient Floor Covering Institute) RECOMMENDED WORK
Monographs: No; OSHA Regulated: No. MEDICAL CONDITIONS
PRACTICES FOR REMOVAL OF RESILIENT FLOOR
GENERALLY AGGRAVATED BY EXPOSURE: N/K. FIRST AID
COVERINGS ARE A DEFINED SET OF INSTRUCTIONS
PROCEDURES: N/A. SKIN AND EYES: N/A. INHALATION: N/A.
ADDRESSED TO THE TASK OF REMOVING ALL RESILIENT
INGESTION: N/A.
FLOOR COVERING STRUCTURES.
IX. REACTIVITY DATA
XIV. NOTICE
STABILITY: N/A. INCOMPATIBILITY: N/A. HAZARDOUS
DECOMPOSITION PRODUCTS: N/A. HAZARDOUS Various government agencies have regulations governing the
POLYMERIZATION: N/A. removal of inplace asbestos-containing materials. If you
contemplate the removal of a resilient floor covering structure that
X. SPILL OR LEAK PROCEDURES
contains (or is assumed to contain) asbestos, you should
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR
determine whether such regulations apply.
SPILLED: N/A. WASTE DISPOSAL METHOD: Dispose of in
The information presented herein is supplied as a guide to those who
accordance with Federal, State, and Local Waste Disposal
handle or use this product. Safe work practices must be employed
Regulations.
when working with any materials. It is important that the end user
makes a determination regarding the adequacy of the safety
procedures employed during the use of this product.
N/A - not applicable or not available
N/K - none known or not known
|