Drytac Corp.
5383 Glen Alden Dr
Richmond, Va 23231 (800) 603-6610
MATERIAL SAFETY DATA SHEET INFORMATION
As part of Drytac Corporation's program to communicate health and safety information to our
customers, we regularly review and update our MSDS to provide information that is as
complete and current as possible. The attached MSDS is the current update for the product that
we currently supply to your company. If any hazardous components are present, they will be
listed in the MSDS section II Hazardous Components along with the CAS number and the
percent present in the compound. Information is also reported in Section II to meet the
requirements of SARA Title III ?Section 313.
This memo is part of the MSDS and must not be detached from the MSDS. Any copying or
redistribution of the MSDS shall include this memo. We suggest you read the enclosed material
closely and forward it to the appropriate personnel within your company. If you have any
questions about this information, please contact us at 1-800-603-6610
Drytac Corp.
Drytac Corp. CHEMTREK 1-800-424-9300
EMERGENCY PHONE NUMBER:
J. Tatum
5383 Glen Alden Dr. PREPARED BY:
11-29-07
Richmond, VA 23231 PREPARATION DATE:
FAX: 800 622-8839 REVISION DATE:
I. PRODUCT IDENTIFICATION
ICUVVCPG-1G
PRODUCT: HMIS CODE
2
TRADE NAME: INSTACure HI GLOSS PHOTO COAT CLEAR HEALTH:
1
FLAMMABILITY:
1
CHEMICAL NAME: Mixture REACTIVITY:
B
PERSONAL PROTECTION:
CHEMICAL FAMILY: UV/EB Curable Product
II. HAZARDOUS COMPONENTS
Regulated Under
Weight %
COMPONENT CAS NUMBER ACGIH TLV OSHA PEL
SARA 313
Not
Not
Acrylate Oligomers Trade Secret 20-30% No
Established Established
Photo Initiator (1) 947-19-3 1-5% No N.E. N.E
Photo Initiator (2) 119-61-9 5-10% No N.#. N.E
Diproplene Glycol Diacrylate 574-72-68-1 20-30% No N.E N.E
Trimethal Propane Triacrylate 15625-89-5 1?10% No N.E N.E
Drytac Corp.
5383 Glen Alden Dr
Richmond, VA 23231 800-603-6610
Material Safety Data Sheet
Hexan 1.6 Diol Diacrylate 13048-33-4 20-30% No N.E N.E
Additives 1-5% No
III. PHYSICAL PROPERTIES
>1
BOILING POINT: SPECIFIC GRAVITY:
>200癈
APPEARANCE AND ODOR: EVAPORATION RATE (n-Butyl
Mobil liquid, light amber <1
Acetate = 1):
color, mild acrylate odor.
? <1 >1
VAPOR PRESSURE (MM HG at 25癈): VAPOR DENSITY (air=1):
Insoluble
SOLUBILITY IN WATER:
IV. REACTIVITY DATA
Stable under normal storage and use conditions.
STABILITY:
CONDITIONS TO AVOID: Storage above 120癋. Direct exposure to sunlight or intense artificial lighting.
Polymerization initiators including peroxides, copper, iron, rust and strong bases.
INCOMPATIBILITY (material to avoid):
Carbon monoxide, Carbon dioxide
HAZARDOUS DECOMPOSITION PRODUCTS:
HAZARDOUS POLYMERIZATION: May occur. Avoid polymerization initiators and storage above 100癋. Maintain air space in
containers. Do not blanket containers with nitrogen of other inert gases.
V. FIRE & EXPLOSION HAZARD DATA
? Not established No data No data
FLAMMABLE LIMITS: LEL: UEL:
>200癈 seta flash
FLASH POINT (癋):
Carbon dioxide or dry chemical for small fires. ?Aqueous foam or water fog for large fires.
EXTINGUISHING MEDIA:
Remove all ignition sources. Wear self-contained breathing apparatus and complete
SPECIAL FIRE FIGHTING PROCEDURES:
personal protective equipment.
High temperature may cause rapid polymerization which can result in the violent
UNUSUAL FIRE & EXPLOSION HAZARDS:
ruptures of storage containers.
VI. HEALTH HAZARD DATA
No No No
A. LISTED CARCINOGENICITY: IARC - NTP - OSHA -
Effects may be delayed. May result in sensitization.
B. EFFECTS OF OVEREXPOSURE
Eye irritant, Direct contact may cause eye injury.
EYE:
Skin irritant, Direct contact may cause skin injury (reddening or burn).
SKIN:
May irritate nose, throat, and lungs. Only slightly toxic by inhalation.
INHALATION:
Only slightly toxic by ingestion.
INGESTION:
None known.
KNOWN EFFECTS ON OTHER ILLNESS:
C. EMERGENCY AND FIRST AID PROCEDURES
Flush eyes with water, remove contact lenses, get medical attention.
EYE:
Wipe off excess, immediately wash with soap and water.
SKIN:
Leave exposure area and seek fresh air.
INHALATION:
Seek medical attention.
INGESTION:
IN ACCORDANCE WITH GOOD PRACTICES OF PERSONAL CLEANLINESS AND HYGIENE HANDLE WITH DUE CARE AND AVOID ANY UNNECESSARY CONTACT WITH THIS PRODUCT. THIS INFORMATION IS SUPPLIED TO YOU UNDER THE
OSHA "RIGHT TO KNOW" REGULATION 29 CFR 1910.1200. THE INFORMATION IS BELIEVED TO BE TRUE AND ACCURATE. NO WARRANTY EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THIS DATA, THE HAZARDS THAT
MAY BE ASSOCIATED WITH ITS USE OR THE RESULTS TO BE OBTAINED FROM ITS USE, IS MADE.
REF: AWI-011 FORM 503 REVISION 2
Drytac Corp.
5383 Glen Alden Dr
Richmond, VA 23231 800-603-6610
Material Safety Data Sheet
D. PROTECTIVE EQUIPMENT
Chemical safety goggles.
EYE:
Impervious gloves such as Neoprene, Nitrile or Latex.
SKIN:
Local ventilation of work area recommended.
VENTILATION:
None required under most application conditions. If local ventilation is not adequate, use a
RESPIRATORY PROTECTION:
organic vapor respirator under conditions that produce increased airborne levels such as
misting or elevated temperatures.
Where contact may occur use face shield, impervious body covering and boots.
OTHER PROTECTIVE EQUIPMENT:
VII. PRECAUTIONS FOR SAFE HANDLING AND STORAGE
A. STEPS TO BE TAKEN IN CASE OF SPILL OR LEAK
Provide adequate ventilation. Absorb spill with sawdust, claw, etc. Use eye and skin protection. Sweep up and place in waste
disposal containers. Wash affected area with detergent and water.
B. HANDLING AND STORAGE:
Store in a cool, dry location, away from heat and sunlight. Store below 100癋.
VIII. OTHER DISPOSAL INFORMATION
Generally considered non-hazardous for disposal purposes. Dispose in accordance with local, state, and federal regulation. Incineration
recommended.
IN ACCORDANCE WITH GOOD PRACTICES OF PERSONAL CLEANLINESS AND HYGIENE HANDLE WITH DUE CARE AND AVOID ANY UNNECESSARY CONTACT WITH THIS PRODUCT. THIS INFORMATION IS SUPPLIED TO YOU UNDER THE
OSHA "RIGHT TO KNOW" REGULATION 29 CFR 1910.1200. THE INFORMATION IS BELIEVED TO BE TRUE AND ACCURATE. NO WARRANTY EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THIS DATA, THE HAZARDS THAT
MAY BE ASSOCIATED WITH ITS USE OR THE RESULTS TO BE OBTAINED FROM ITS USE, IS MADE.
REF: AWI-011 FORM 503 REVISION 2
Drytac Corp.
5383 Glen Alden Dr
Richmond, VA 23231 800-603-6610
Material Safety Data Sheet
IN ACCORDANCE WITH GOOD PRACTICES OF PERSONAL CLEANLINESS AND HYGIENE HANDLE WITH DUE CARE AND AVOID ANY UNNECESSARY CONTACT WITH THIS PRODUCT. THIS INFORMATION IS SUPPLIED TO YOU UNDER
OSHA "RIGHT TO KNOW" REGULATION 29 CFR 1910.1200. THE INFORMATION IS BELIEVED TO BE TRUE AND ACCURATE. NO WARRANTY EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THIS DATA, THE HAZARDS T
MAY BE ASSOCIATED WITH ITS USE OR THE RESULTS TO BE OBTAINED FROM ITS USE, IS MADE.
REF: AWI-011 FORM 503 REVISIO
|